2014-03-20 12:53 GMT+02:00 evan igor <address@hidden>:
Hi,i changed the baudrate of the GPS to 9600 from u_center and i'm trying to the module 'gps_ubx_ucenter'but the following error appear
On Wed, Mar 19, 2014 at 12:00 PM, Ben Laurie <address@hidden> wrote:
On 19 March 2014 05:56, Kadir ÇİMENCİ <address@hidden> wrote:
maybe it is related with the baud rate of your gps(I had a similar problem , ppz ucenter module can't talk with gps when it is configured to 19200 ). Configure the baud rate as 9600 on ublox , then connect gps your ppz. and don't forget to add 'gps_ubx_ucenter' module to your project..The other problem is you could have the wrong port configured.Kadir2014-03-19 4:44 GMT+02:00 Eduardo lavratti <address@hidden>:
open the message windows and lock @ GPS to see if you ppz are receiving any gps message.
way you continue with KILL status ? kill switch with are active ?
Date: Wed, 19 Mar 2014 02:09:22 +0200
From: address@hidden
To: address@hidden
Subject: [Paparazzi-devel] no GPS no navigation route_______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-develHi,i have lisa/m i connected everything in the same manner as in the wiki but the following errors1- GPS not fix although it's wirking correctly with u-center.2- no navigation routine set:3- error in the main paparazzi s/wany comments appreciated in advance
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
