Re: [Paparazzi-devel] GPS 3D lock - but coordinates all zero

[Felix Ruess]

Hi Simon,

this is strange indeed...
you could also try to let the gps_ubx_ucenter module configure the gps for you and check if you still get the same problem...

Cheers, Felix

On Tue, Mar 11, 2014 at 9:25 PM, Simon Liebold <address@hidden> wrote:

I just tested if I could reproduce the issue from last Sunday. It took just 45 minutes (to get a lock): Welcome to Atlantis!



Now I am pretty sure that I have messed up my GPS settings. I just thought I should share this.

Is going for a swim:
Simon

Am 11.03.2014 19:26, schrieb Simon Liebold:

Hi Heinrich,

are you using a navilock 407ETTL?

No, it is the GPS13 with a LEA-6H.

This one  need up to 5-8h run time to charge the battery.
Also the old SAM-LS shows the same behaviour.

Mhmm, I will leave it on the balcony for some time and see if it improves. Otherwise I will revisit the settings in the Ucenter application.

I had the same error.
In think we need a software update, that when the coordinates are all zero no 3D fix message and no start.

I tend to agree. Though, I wouldn't do the same mistake again. But others probably would.

The zero zero  coordinates are  in the atlantic see.

OK, that explains why it was gone so quickly. :-)


I will post again if I found what has caused this.

Simon

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel