|
From: | Felix Ruess |
Subject: | Re: [Paparazzi-devel] Rotocraft horizontal speed limiting in flight plan? |
Date: | Tue, 11 Mar 2014 00:14:31 +0100 |
Felix,
Is there any way to change the maximum speed dynamically (i.e. with a SET command in a flight plan block), or can it only be changed at build-time?
-Luke
From: paparazzi-devel-bounces+nsknews=address@hidden [mailto:paparazzi-devel-bounces+nsknews=address@hidden] On Behalf Of Felix Ruess
Sent: Friday, March 7, 2014 5:23 PM
To: Paparazzi UAV devel list
Subject: Re: [Paparazzi-devel] Rotocraft horizontal speed limiting in flight plan?
Hi Mark,
you should be able to set the max speed by defining GUIDANCE_H_REF_MAX_SPEED in meters/second (defaults to 5 m/s) in your airframe file.
Cheers, Felix
On Fri, Mar 7, 2014 at 10:54 PM, Mark Schnittman <address@hidden> wrote:
Hello,
I'm new to Paparazzi and have been banging my head a little too much in trying to figure out how to limit the speed of my quadrotor. I've been working in the simulator with the Quad_Lisa_M2 AC, and also in the real world using an AR Drone as the platform.I'm trying to get the AR Drone to do some automatic waypoint navigation through a flight plan. It works, but it looks like the quadrotor is flying with maximum horizontal speed as it goes. I'd like to be able to set a maximum horizontal speed in the flight plan.
I'd appreciate any suggestions on how to do this and/or pointers on what topics I should read up on.
Thanks a lot,
Mark
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
[Prev in Thread] | Current Thread | [Next in Thread] |