paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] no response for any of the motors


From: Kadir ÇİMENCİ
Subject: Re: [Paparazzi-devel] no response for any of the motors
Date: Fri, 7 Feb 2014 18:30:24 +0200

i think your vm does not recognise the usb device. what is your output  'ls /dev/ttyUSB*' .on the other hand the baud rate must be 57600 i guess..

7 Şub 2014 11:56 tarihinde "evan igor" <address@hidden> yazdı:
I recheck all the devices separately and starting to upload the firmware to the paparazzi but this time i used virtual machine and disconnect paparazzi from host and connect to the vm but when trying to upload making the target as ap and the session as flight address@hidden

but the following error message appeared  

Failure("Error opening modem serial device : fd < 0 (/dev/ttyUSB0)")

thanks


On Fri, Feb 7, 2014 at 10:23 AM, Iman <address@hidden> wrote:
I think it's better to power it using battery "V_Batt" and first of all
become sure about power

http://wiki.paparazziuav.org/w/images/7/7b/LisaM_v2_0_wiring_quadrocopter_spektrum_pwmesc.png



--
View this message in context: http://lists.paparazziuav.org/no-response-for-any-of-the-motors-tp14527p14537.html
Sent from the paparazzi-devel mailing list archive at Nabble.com.

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel


_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel


reply via email to

[Prev in Thread] Current Thread [Next in Thread]