paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Paparazzi-devel] flash stm32f4 Discovery..


From: Luis Carlos
Subject: [Paparazzi-devel] flash stm32f4 Discovery..
Date: Fri, 8 Nov 2013 10:13:48 -0300

hi to all...
i  compile and flash trought dfu the discovery board follow the wiki procedures.. and the paparazzi center return the error below...this is normal ??? and need not worry about this ... apparently the board has been flashed...
thank you
Best Regards



make[1]: Leaving directory `/home/user/paparazzi/sw/airborne'
cd sw/airborne; make TARGET=ap upload
Using "arch/stm32/apogee.ld" as ldscript for target "ap".
make[1]: Entering directory `/home/user/paparazzi/sw/airborne'
Using dfu-util at 0x08000000
No valid DFU suffix signature
Warning: File has no DFU suffix
dfu-util 0.5

(C) 2005-2008 by Weston Schmidt, Harald Welte and OpenMoko Inc.
(C) 2010-2011 Tormod Volden (DfuSe support)
This program is Free Software and has ABSOLUTELY NO WARRANTY

dfu-util does currently only support DFU version 1.0

Filter on vendor = 0x0483 product = 0xdf11
Opening DFU USB device... ID 0483:df11
Run-time device DFU version 011a
Found DFU: [0483:df11] devnum=0, cfg=1, intf=0, alt=0, name="@Internal Flash  /0x08000000/04*016Kg,01*064Kg,07*128Kg"
Claiming USB DFU Interface...
Setting Alternate Setting #0 ...
Determining device status: state = dfuERROR, status = 10
dfuERROR, clearing status
Determining device status: state = dfuIDLE, status = 0
dfuIDLE, continuing
DFU mode device DFU version 011a
Device returned transfer size 2048
DfuSe interface name: "Internal Flash  "
make[1]: Leaving directory `/home/user/paparazzi/sw/airborne'
make: Leaving directory `/home/user/paparazzi'

DONE 'make -C /home/user/paparazzi -f Makefile.ac AIRCRAFT=F4DISCOVERY ap.upload'



Attachment: discovery
Description: Binary data


reply via email to

[Prev in Thread] Current Thread [Next in Thread]