|
From: | Stephen Dwyer |
Subject: | Re: [Paparazzi-devel] need help for uploading s/w for liza\m |
Date: | Tue, 2 Jul 2013 11:04:32 -0600 |
HI,my question is how to get these row data.thanksOn Tue, Jul 2, 2013 at 9:39 AM, Marius Pfeffer <address@hidden> wrote:
Hello
I don't think you can do much with the raw sensor data.
Just connect everything in the quadrocopter and try connecting the quadro with the gcs.
There you should see the position of the quadro at the PFD.-Marius
Am 02.07.2013 09:01 schrieb "evan igor" <address@hidden>:Hi,thanks for your response i tried to upload s/w for quadrotor to liza/m through the cgs and it's written done but how can i check the data from the sensors some told me that it's done through get raw data but how can i get it could you guide me through.thanksOn Mon, Jul 1, 2013 at 2:57 PM, Marius Pfeffer <address@hidden> wrote:
Hello
Please discribe your errors a bit more precise !
-Marius
Am 01.07.2013 07:49 schrieb "evan igor" <address@hidden>:_______________________________________________Hi all;anybody try to help me in uploading s/w for liz\mthanks for all
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
[Prev in Thread] | Current Thread | [Next in Thread] |