Re: [Paparazzi-devel] Problem compiling after change to master-branch

[Felix Ruess]

Hi Jorn,

two things: 

1. please pull again first.

  Just commited some more fixes (configuring the uart with Uartx is not allowed anymore, only upper case version now)

  <configure name="MODEM_PORT"  value="UART1"/>

2. You probably didn't run make after switching the branch.

  If you want to be on the really safe side: make clean && make

Cheers, Felix

On Tue, Feb 26, 2013 at 9:56 PM, Jorn Anke <address@hidden> wrote:

Hi,

I have just changed from the stable- to the master branch. 

At first try to compile my previous (successfully compiled) configuration, I got this error message, which I do not understand:

Run 'make -C /home/jorn/paparazzi -f Makefile.ac AIRCRAFT=YAPA_Chimu ap.compile '
make: Entering directory `/home/jorn/paparazzi'
-----------------------------------------------------------------------
Paparazzi version v4.9_devel-568-g2b2be3b-dirty
-----------------------------------------------------------------------
YAPA_Chimu
BUILD YAPA_Chimu, TARGET ap
make[1]: Entering directory `/home/jorn/paparazzi'
BUILD /home/jorn/paparazzi/var/YAPA_Chimu/generated/airframe.h
##################################################
 AIRFRAME MODEL: YAPA_Chimu
##################################################
BUILD /home/jorn/paparazzi/var/YAPA_Chimu/generated/modules.h
BUILD /home/jorn/paparazzi/var/YAPA_Chimu/generated/periodic_telemetry.h
BUILD /home/jorn/paparazzi/var/YAPA_Chimu/generated/settings.h
make[1]: *** No rule to make target `/home/jorn/paparazzi/sw/tools/gen_autopilot.out', needed by `/home/jorn/paparazzi/var/YAPA_Chimu/generated/autopilot_core.h'.  Stop.
make[1]: Leaving directory `/home/jorn/paparazzi'
make: *** [ap.ac_h] Error 2
make: Leaving directory `/home/jorn/paparazzi'

DONE (exec make -C /home/jorn/paparazzi -f Makefile.ac AIRCRAFT=YAPA_Chimu ap.compile  2>&1)


Anyone who can explain what is going on?


PS: The refernece to the AIRFRAME MODEL: YAPA_Chimu must stem from an old configuration. I do not understand why this reference is still appearing. It did however not seem to make any trouble when I was compiling my configuration with the stable branch.

Cheers,

Jorn

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel