Re: [Paparazzi-devel] GDB Paparazzi

[manish jain]

Any suggestions what I can do to resolve this issue?

On Sun, Feb 17, 2013 at 1:52 AM, manish jain <address@hidden> wrote:

Hi,
I am trying to run JSBSim. I was able to compile it successfully but when I run it, it is stuck after the following message:

Simulation delta 0.00416667
Broadcasting on network 127.255.255.255, port 2010
sys_time resolution: 0.016667
sys_time period in msec: 16

Any suggestion regarding this problem?

@Stephen: I saw on the mailing list that you also faced the problem regarding JSBSim and was able to resolve that. Have you integrated that change in the master branch?

Thanks
Manish

On Sat, Feb 16, 2013 at 10:53 PM, Stephen Dwyer <address@hidden> wrote:

Hello,

It depends which simulator you are using. If you use the basic OCAML simulator for fixed-wing, then no, but you may be able to use ocamldebug (the ocaml equivalent to gdb). If you are using with the fixed-wing JSBSim simulator, or the NPS simulator, you should be able to use gdb to debug.

Thanks,

-Stephen Dwyer

On Sat, Feb 16, 2013 at 5:36 PM, manish jain <address@hidden> wrote:

Hi All,
Is it possible to debug code of airborne through gdb when running the simulation in GCS?

Thanks
Manish

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel