Re: [Paparazzi-devel] Problem on ubuntu 12.04

[Gareth Roberts]

Did you copy the UDEV rules over?
It may be a permissions problem.

Cheers,
Gareth

On Mon, 25 Jun 2012 11:41:30 +0100, Árni Þorvaldsson <address@hidden>  
wrote:

> Hi all
>
> Using Tiny V/2.11
>
> I recently installed paparazzi on my table computer and it is working  
> great now, then I installed it on my laptop and is not able to get it  
> running.
> Problems:
>
> *bootload mode works for both computers
>
> *uploads airframe on to the board without errors for both computers but  
> on the laptop only the green led is blinking but on the table computer  
> both leds blink ( green and red).
>
> *load session and connect to board through usb-serial.
>                 *Works for the table computer and the GCS loads up.
>                 *doesn´t work for the laptop, get the error
>                      Failure("Error opening modem serial device : fd < 0  
> (/dev/ttyUSB0)")
>
> to me it looks like uploading the airframe to board through laptop is  
> failing since the red light is not blinking afterwards.
>
> Thanks for the help
> Arni.
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel