Re: [Paparazzi-devel] not getting red led after uploading

[Felix Ruess]

Hi Arni,

by default only the Led2 (which should be red) is used as GPS_LED, so blinking if you don't have a fix yet.

I added some info for the Leds to http://paparazzi.enac.fr/wiki/Tiny/v2.11#LEDs

You can use the other LEDS via configure options in your firmware section.

Added documentation for that here: http://paparazzi.enac.fr/wiki/Airframe_Configuration#LEDs

Cheers, Felix

On Thu, Jun 21, 2012 at 4:15 PM, Árni Þorvaldsson <address@hidden> wrote:

Hi
I am working with Tiny.
uploading shows no errors but I only get the green Led2 blinking when uploading is done.
Does that mean that the upload did not work?

regards Arni


_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel