[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Paparazzi-devel] On board data logging using TWOG
From: |
Cedric Marzer |
Subject: |
Re: [Paparazzi-devel] On board data logging using TWOG |
Date: |
Sat, 5 May 2012 20:01:28 +0200 |
Hello Martin,
I succeeded to make the logomatic log thanks to your code, but when I try to
use sd2log I get the following error : pprz.values_of_payload too many bytes…
I must admit that I haven't soldered the capacitor you mentioned. I might try
that tonight but I doubt that it is the problem…
Did you make a change to the code that is not reflected to the github ?
I also noticed that the logomatic code is only in the dev branch (and this is
not mentioned in the wiki).
Thank you for your help.
Cédric
Le 11 mars 2012 à 15:25, Martin Mueller a écrit :
> Hi Cédric,
>
> have added support for the Logomatic on the dev branch. Some general fixes
> for the logger were also needed.
>
> Had not seen that Sparkfun board. Looks interesting, maybe a little too huge
> (only a few millimeters shorter than the Tiny). Had to add at least a large
> capacitor to the LiPo port to make it work. Otherwise the charge circuit kept
> the Vcc oscillating too much.
>
> Needs some changed routing to make use of the LiPo together with an autopilot
> (USB Vbus <-> 5V from autopilot).
>
> Martin
- Re: [Paparazzi-devel] On board data logging using TWOG,
Cedric Marzer <=