[Paparazzi-devel] Upload firmware-Device no found(Lisa/M 2.0)
From:
C. Y. Chen
Subject:
[Paparazzi-devel] Upload firmware-Device no found(Lisa/M 2.0)
Date:
Wed, 2 May 2012 00:31:57 +0800
Hi,
I am facing troubles when uploading firmware to lisa M. I'm new to linux, using ubuntu 11.10, and lisa M connect to laptop with USB I followed the wiki pages to setup paparazzi center, when l tried to upload the firmware, it got issue "Error: unable to open ftdi device: device not found"(as shown in attached .png),
what i have done: 1.install paparazzi center and update 2.add myself to plugdev $ sudo adduser myaccount plugdev $ newgrp- 3. copy paparazzi rules to /etc/udev/rules.d/ $ sudo cp paparazzi/conf/system/udev/rules/50-paparazzi.rules /etc/udev/rules.d/
also use "lsusb" command, when connect lisa M:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse Bus 001 Device 004: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor
Bus 001 Device 005: ID 0a5c:217f Broadcom Corp. Bluetooth Controller Bus 001 Device 006: ID 04f2:b217 Chicony Electronics Co., Ltd Bus 002 Device 034: ID 0483:df11 SGS Thomson Microelectronics
disconnect lisa M:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse Bus 001 Device 004: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor Bus 001 Device 005: ID 0a5c:217f Broadcom Corp. Bluetooth Controller
Bus 001 Device 006: ID 04f2:b217 Chicony Electronics Co., Ltd
i think " SGS Thomson Microelectronics" this one stand for lisa M, does it means laptop recognize it correctly? and what can i do to fix this problem?
In conf/boards/, there is no lisa_m_2.0.make file, also imu have no aspirinv2.1。Where can i get this two files?