On Wed, Feb 22, 2012 at 1:19 PM, Chris Wozny <
address@hidden> wrote:
> All,
>
> After utilizing FlightGear 2.4 instead of FlightGear 2.6 RC2, I was
> able to view the JSBSim in FlightGear. Unfortunately, even if I ran
> with the --timeofday=noon flag and/or changing the time in
> sw/simulator.fg.c it was still dark. I just ended up shifting my
> flight plan to Toulouse to "resolve" that issue.
>
> - Chris
>
> On Wed, Feb 22, 2012 at 9:30 AM, Chris Wozny <
address@hidden> wrote:
>> All,
>>
>> I was running a release candidate of FlightGear 2.6, so I will
>> download version 2.4 and see if that resolves the issue.
>>
>> - Chris
>>
>> On Tue, Feb 21, 2012 at 10:28 PM, Stephen Dwyer <
address@hidden> wrote:
>>> Hi Chris (Woz...),
>>>
>>> Sorry, I haven't tried running fg on OS X in a while (my installation
>>> is broken at the moment...). I will try to get things going again
>>> soon. However, from what I can remember what you have looks correct
>>> (
http://paparazzi.enac.fr/wiki/InstallationMacOSX#Installing_FlightGear),
>>> so I don't know what the problem may be at the moment. Perhaps someone
>>> else running OS X can try?
>>>
>>> Thanks,
>>> -Stephen Dwyer
>>>
>>> On Tue, Feb 21, 2012 at 6:36 PM, Chris Wozny <
address@hidden> wrote:
>>>> Chris,
>>>>
>>>> I just tried as you said and the same happens, no flight.
>>>>
>>>> - Woz (since there are too many Chris's :) )
>>>>
>>>> On Tue, Feb 21, 2012 at 6:32 PM, Chris Gough
>>>> <
address@hidden> wrote:
>>>>> Chris,
>>>>>
>>>>> does it work if you start them the other way round (flightgear first,
>>>>> then launchsitl), waiting FG to actually be up and running before
>>>>> starting the other thing?
>>>>>
>>>>> Chris Gough
>>>>>
>>>>> On Wed, Feb 22, 2012 at 12:25 PM, Chris Wozny <
address@hidden> wrote:
>>>>>> Stephen,
>>>>>>
>>>>>> What are you using for commands to do this all on OSX? I've got
>>>>>> Paparazzi up and running in OSX and am simulating my flight via this
>>>>>> command:
>>>>>>
>>>>>> .../sw/simulator/launchsitl -a Mini_Vertigo_2012 -fg 127.0.0.1 -boot
>>>>>> -norc -jsbsim
>>>>>>
>>>>>> And then running the OSX version of FlightGear with the following flags:
>>>>>>
>>>>>> --fdm=null --native-gui=socket,in,30,,5501,udp
>>>>>>
>>>>>> And the aircraft still won't utilize the feed from the simulation. The
>>>>>> aircraft just sits there.
>>>>>>
>>>>>> Thanks,
>>>>>> Chris
>>>>>>
>>>>>> On Tue, Feb 21, 2012 at 2:32 PM, Stephen Dwyer <
address@hidden> wrote:
>>>>>>> Hello,
>>>>>>>
>>>>>>> I have had the same problem as you, FG just doesn't work nicely in a
>>>>>>> VM (I am using virtualbox on snow leopard on a MBP), and as such,
>>>>>>> always ran FG in OS X with pprx+jsbsim running on the ubuntu VM. For
>>>>>>> me the only trick was to set up the network settings for virtualbox
>>>>>>> correctly, you might need to experiment in VMWare (no experience
>>>>>>> there). I also tend to run fg at very low graphics settings, as I care
>>>>>>> more for speed than nice rendering.
>>>>>>>
>>>>>>> Now however, I just run all of pprx, jsbsim and fg on OS X directly.
>>>>>>> This ends up being more convenient and faster (for me) than using a
>>>>>>> VM. The only hiccup is the occasional debugging required that is OS X
>>>>>>> specific, but there are some experts on the mailing list, etc. who are
>>>>>>> extremely helpful in this regard.
>>>>>>>
>>>>>>> Hope that helps.
>>>>>>>
>>>>>>> Thanks,
>>>>>>> -Stephen Dwyer
>>>>>>>
>>>>>>> On Tue, Feb 21, 2012 at 1:47 AM, Chris Gough
>>>>>>> <
address@hidden> wrote:
>>>>>>>> Clarification: I found Flightgear unusable in the VM, so moved it to the host (debian) and was underwhelmed by the improvement at first. Host is Asus laptop with NVIDA graphics, but I was using the free graphics drivers that were distributed/installed with debian, and they were only margially better than the VirtualBox VM. After installing the appropriate NVIDA drivers for the hardware and building a new kernel, it ran much better.
>>>>>>>>
>>>>>>>> It's not the case that I got it working well in the VM, I never really tried.
>>>>>>>>
>>>>>>>> Chris Gough
>>>>>>>>
>>>>>>>> On 21/02/2012, at 5:00 PM, Chris Wozny <
address@hidden> wrote:
>>>>>>>>
>>>>>>>>> Chris,
>>>>>>>>>
>>>>>>>>> There are an excessive amount of artifacts in FlightGear when I run it
>>>>>>>>> in inside the Ubuntu VM on my MacBook Pro. I'll look at getting the
>>>>>>>>> proprietary Nvidia drivers for the graphics card and see if that helps
>>>>>>>>> out at all.
>>>>>>>>>
>>>>>>>>> - Chris
>>>>>>>>>
>>>>>>>>> On Mon, Feb 20, 2012 at 8:55 PM, Chris Gough
>>>>>>>>> <
address@hidden> wrote:
>>>>>>>>>>> 1. Has anyone ever run Paparazzi/JSBSIM on Linux inside of a Virtual Machine
>>>>>>>>>>> and then forwarded data via the -fg flag to their host OS' IP address which
>>>>>>>>>>> is running FlightGear? My VM doesn't have hardware accelerated graphics so
>>>>>>>>>>> FlightGear runs like trash in it.
>>>>>>>>>>
>>>>>>>>>> Yep. I did that a while ago for similar reasons, and don't remember
>>>>>>>>>> having any problems - once I installed the appropriate (proprietary
>>>>>>>>>> NVIDA) drivers on my host that is. Isn't it working for you? What's
>>>>>>>>>> the problem?
>>>>>>>>>>
>>>>>>>>>> Chris Gough
>
> _______________________________________________
> Paparazzi-devel mailing list
>
address@hidden
>
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel