Re: [Paparazzi-devel] Startup issue with Lisa/M

[Eduardo lavratti]

What the type of your frame ? rotorcraft or fixed wing ?
if is rotor, what kinf of esc you are using ?

---

Date: Tue, 3 Jan 2012 19:55:14 +0100
From: address@hidden
To: address@hidden
Subject: Re: [Paparazzi-devel] Startup issue with Lisa/M

Hi Eduardo,

thank you for your reply. I have the following define for the kill-switch:
      <define name="RADIO_KILL_SWITCH" value="RADIO_CAM"/>
The CAM switch is a two point switch on my radio.
If I activate it, the mode changes from "ATT" to "KILL". But the Motor even don't start when kill is deactivated.

Cheers

Christoph

On 03.01.2012 19:36, Eduardo lavratti wrote:

How many channels have your radio ?
Your KILL switch are ON.
With spektrum radio the KILL are the channel number 5.

Look ate radio config file and change the KILL channel if necessary.

> Date: Tue, 3 Jan 2012 19:14:20 +0100
> From: address@hidden
> To: address@hidden
> Subject: [Paparazzi-devel] Startup issue with Lisa/M
>
> Hi everyone and a happy new year!
>
> I'm currently trying to get a Lisa/m to run. Everything is fine so far,
> I managed to get it to run, also with my PPM-RC. But now I have a
> problem: I can't get the motors to run (not really the motors , I have
> none attached, I'm just watching the throttle gauge in the GCS and think
> it should show something different than 0%, once the motors run).
> I tried the usual startup-sequence, holding down the throttle and push
> yaw to max. The problem I see is that "kill_throttle" is "Kill" and once
> I set it to resurrect, it switches to kill again after approx 30 secs.
> Currently I don't have a GPS attached, so I have no fix. Could this be
> the problem? Looking at the code it seems unlikely.
> I guess this is a noobish question, but every help would be appreciated.
>
> Cheers
>
> Christoph
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
  

_______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel