paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] BOOZ WITH Newer I2C to PWM converter for standard


From: Eduardo lavratti
Subject: Re: [Paparazzi-devel] BOOZ WITH Newer I2C to PWM converter for standard ESC
Date: Fri, 9 Dec 2011 15:04:57 +0000


btw .. how much this converter in U$ ?


From: address@hidden
To: address@hidden
Date: Fri, 9 Dec 2011 15:03:15 +0000
Subject: Re: [Paparazzi-devel] BOOZ WITH Newer I2C to PWM converter for standard ESC

First of all ...
are your airframe configuration correct ?
its configured do mkk actuator ?



Date: Fri, 9 Dec 2011 12:16:54 +0100
From: address@hidden
To: address@hidden
Subject: [Paparazzi-devel] BOOZ WITH Newer I2C to PWM converter for standard ESC

Hi all,

I'm trying to run standard ESC with the Booz Board. To do it, I use the newer converter I2C to PWM from Abusemark.com http://abusemark.com/store/index.php?main_page=product_info&products_id=3

I have connected the GPS, and the YAI IMU working OK but the converter doesn't work. I don't know if I must put a special config frame for it, to reflash the converter, to use another address....

Does anybody use it with Booz? Any recomendation?

Regards,

Rafael Espino.

_______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

reply via email to

[Prev in Thread] Current Thread [Next in Thread]