Re: [Paparazzi-devel] Error (dev/paparazzi/xbee)

[Felix Ruess]

Hi Pedro,

the modem is only mapped to /dev/paparazzi/xbee if it is a MaxStream
PKG-U, or you expicitly added your modem (with serial number) to the
udev rules.
So you can either add your serial to the rules, or just change the
line to use /dev/ttyUSB0 instead.
Also are you really using the xbee API mode? If not you should use the
USB serial session (and adjust the baud rate if you have a different
one set).

Cheers, Felix

On Tue, Jun 7, 2011 at 6:23 PM, Pedro Andrade <address@hidden> wrote:
> Hey Chris,
> I did set up USB when I did copy "10-paparazzi.rules" for
> "/etc/udev/rules.d/", right?
> This are the last lines of dmesg's output.
> [  176.145360] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by
> device (Stat=0x51 Err=0x04)
> [  176.145431] ata2.00: configured for UDMA/100
> [  176.145858] ata2: EH complete
> [  247.087787] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,commit=0
> [  272.180066] lo: Disabled Privacy Extensions
> [ 1173.664188] usb 6-1: new full speed USB device using uhci_hcd and address
> 2
> [ 1173.979016] usbcore: registered new interface driver usbserial
> [ 1173.979064] USB Serial support registered for generic
> [ 1173.979354] usbcore: registered new interface driver usbserial_generic
> [ 1173.979357] usbserial: USB Serial Driver core
> [ 1174.012231] USB Serial support registered for FTDI USB Serial Device
> [ 1174.012686] ftdi_sio 6-1:1.0: FTDI USB Serial Device converter detected
> [ 1174.012758] usb 6-1: Detected FT232RL
> [ 1174.012761] usb 6-1: Number of endpoints 2
> [ 1174.012763] usb 6-1: Endpoint 1 MaxPacketSize 64
> [ 1174.012766] usb 6-1: Endpoint 2 MaxPacketSize 64
> [ 1174.012768] usb 6-1: Setting MaxPacketSize 64
> [ 1174.014160] usb 6-1: FTDI USB Serial Device converter now attached to
> ttyUSB0
> [ 1174.014180] usbcore: registered new interface driver ftdi_sio
> [ 1174.014182] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
>
> Cheers.
>> Date: Tue, 7 Jun 2011 14:41:24 +1000
>> From: address@hidden
>> To: address@hidden
>> Subject: Re: [Paparazzi-devel] Error (dev/paparazzi/xbee)
>>
>> Hi Pedro,
>>
>> did you set up USB access?
>>
>>
>> http://paparazzi.enac.fr/wiki/Installation#Setting_access_rights_for_USB_download
>>
>> unplug tour modem from the USB port on your computer, plug it in again
>> and type "dmesg". What are the last 10 lines of dmesg's output?
>>
>> Chris Gough
>>
>> On Tue, Jun 7, 2011 at 2:20 PM, Pedro Andrade <address@hidden>
>> wrote:
>> > Hy world,
>> > I'm with the problem at to run session "Flight address@hidden"
>> > sequinte
>> > the error occurs.
>> >  " Failure("Error opening modem serial device : fd < 0
>> > (/dev/paparazzi/xbee)") "
>> > Is attached hereto the print screen of the error.
>> > Cheers.
>> > _______________________________________________
>> > Paparazzi-devel mailing list
>> > address@hidden
>> > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> >
>> >
>>
>>
>>
>> --
>> .
>>
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>