Re: [Paparazzi-devel] Error (dev/paparazzi/xbee)

[Pedro Andrade]

Hi Felix,

I'm using Xbee API mode and the baud rate is correct.

I not using PKG-U I use two modems Xbee Pro how this " https://store.ppzuav.com/osc/product_info.php?products_id=76&osCsid=mrfm2ob5sm01uan9cmlqqevqp2 "

How add the serial number to the rules?

Thank you very much.

> Date: Tue, 7 Jun 2011 21:07:53 +0200
> From: address@hidden
> To: address@hidden
> Subject: Re: [Paparazzi-devel] Error (dev/paparazzi/xbee)
>
> Hi Pedro,
>
> the modem is only mapped to /dev/paparazzi/xbee if it is a MaxStream
> PKG-U, or you expicitly added your modem (with serial number) to the
> udev rules.
> So you can either add your serial to the rules, or just change the
> line to use /dev/ttyUSB0 instead.
> Also are you really using the xbee API mode? If not you should use the
> USB serial session (and adjust the baud rate if you have a different
> one set).
>
> Cheers, Felix
>
> On Tue, Jun 7, 2011 at 6:23 PM, Pedro Andrade <address@hidden> wrote:
> > Hey Chris,
> > I did set up USB when I did copy "10-paparazzi.rules" for
> > "/etc/udev/rules.d/", right?
> > This are the last lines of dmesg's output.
> > [  176.145360] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by
> > device (Stat=0x51 Err=0x04)
> > [  176.145431] ata2.00: configured for UDMA/100
> > [  176.145858] ata2: EH complete
> > [  247.087787] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,commit=0
> > [  272.180066] lo: Disabled Privacy Extensions
> > [ 1173.664188] usb 6-1: new full speed USB device using uhci_hcd and address
> > 2
> > [ 1173.979016] usbcore: registered new interface driver usbserial
> > [ 1173.979064] USB Serial support registered for generic
> > [ 1173.979354] usbcore: registered new interface driver usbserial_generic
> > [ 1173.979357] usbserial: USB Serial Driver core
> > [ 1174.012231] USB Serial support registered for FTDI USB Serial Device
> > [ 1174.012686] ftdi_sio 6-1:1.0: FTDI USB Serial Device converter detected
> > [ 1174.012758] usb 6-1: Detected FT232RL
> > [ 1174.012761] usb 6-1: Number of endpoints 2
> > [ 1174.012763] usb 6-1: Endpoint 1 MaxPacketSize 64
> > [ 1174.012766] usb 6-1: Endpoint 2 MaxPacketSize 64
> > [ 1174.012768] usb 6-1: Setting MaxPacketSize 64
> > [ 1174.014160] usb 6-1: FTDI USB Serial Device converter now attached to
> > ttyUSB0
> > [ 1174.014180] usbcore: registered new interface driver ftdi_sio
> > [ 1174.014182] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
> >
> > Cheers.
> >> Date: Tue, 7 Jun 2011 14:41:24 +1000
> >> From: address@hidden
> >> To: address@hidden
> >> Subject: Re: [Paparazzi-devel] Error (dev/paparazzi/xbee)
> >>
> >> Hi Pedro,
> >>
> >> did you set up USB access?
> >>
> >>
> >> http://paparazzi.enac.fr/wiki/Installation#Setting_access_rights_for_USB_download
> >>
> >> unplug tour modem from the USB port on your computer, plug it in again
> >> and type "dmesg". What are the last 10 lines of dmesg's output?
> >>
> >> Chris Gough
> >>
> >> On Tue, Jun 7, 2011 at 2:20 PM, Pedro Andrade <address@hidden>
> >> wrote:
> >> > Hy world,
> >> > I'm with the problem at to run session "Flight address@hidden"
> >> > sequinte
> >> > the error occurs.
> >> >  " Failure("Error opening modem serial device : fd < 0
> >> > (/dev/paparazzi/xbee)") "
> >> > Is attached hereto the print screen of the error.
> >> > Cheers.
> >> > _______________________________________________
> >> > Paparazzi-devel mailing list
> >> > address@hidden
> >> > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >> >
> >> >
> >>
> >>
> >>
> >> --
> >> .
> >>
> >> _______________________________________________
> >> Paparazzi-devel mailing list
> >> address@hidden
> >> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >
> > _______________________________________________
> > Paparazzi-devel mailing list
> > address@hidden
> > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >
> >
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel