paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Hardware filtering quesiton


From: Daniel Morgan
Subject: Re: [Paparazzi-devel] Hardware filtering quesiton
Date: Fri, 6 Jun 2008 22:26:28 -0600

Do you think these would be effective on the tiny boards?




On Fri, Jun 6, 2008 at 5:18 PM, Michel GORRAZ <address@hidden> wrote:
Hi Daniel,

1206 and 0805 doesn't mean values but...sizes !
0805 = 80 x 50mil (20.3 x 1.27mm)
1206 = 120 x 60mil (3.05 x 1.52mm)

So the components you need are :
capacitors value = 1pf, tolerance = 10% (or less), max voltage = 100V (or more), size 0805
inductors (coils) value = 6.8nH, tolerance = 20% (or less), size 1206

Nice filter (ugly module soldering :) but probably useless with such a small GPS antenna ground plane...

@+
Michel


2008/6/6 Daniel Morgan <address@hidden>:
SO i have been looking at this website trying to figure out how to make a filter for the gps so it will reject outside frequencies but have been unable to figure out what a 1206 coil is specifically.. I think it is a inductor but i thought those were measured in Henry's.. Here is the website http://www.webx.dk/rc/video-wireless/filtergps.htm . The filter i am looking to make is the:

Homemade low-pass filter for GPS and block for 2.4GHz

using 1206 coils (20% tolerance) and cheap 0805 1pF (10%) 100V capacitors.


Maybe someone who knows what this guy is talking about can explain it better. I would really appreciate this.. Sorry for the dumb question

_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel



_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel



reply via email to

[Prev in Thread] Current Thread [Next in Thread]