[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Openexr-devel] IlmBase 1.0.2 make fail on OSX
|
From: |
Wesley Smith |
|
Subject: |
Re: [Openexr-devel] IlmBase 1.0.2 make fail on OSX |
|
Date: |
Fri, 13 Aug 2010 19:37:52 +0200 |
If you comment out CXXFLAGS="$CXXFLAGS -Wno-long-double" it compiles
and passes all tests with make check. I didn't make check OpenEXR,
but it too requires this change to configure.ac. Not sure why this
was in there, but perhaps it needs to be dependent on a particular
compiler version??
wes
On Fri, Aug 13, 2010 at 7:20 PM, Piotr Stanczyk <address@hidden> wrote:
> gotcha ... I thought we had this one done too, good to catch these. If you
> take that option out does it build and pass the tests?
>
> Thanks
>
> Piotr
>
>
> On 08/13/2010 04:59 AM, Wesley Smith wrote:
>>
>> Hi,
>> I just tried to build ilmbase on OSX. Make fails immediately with the
>> following message. Below is the config.log
>>
>>
>> Making all in Half
>> if g++ -DHAVE_CONFIG_H -I. -I. -I../config -I../config -pipe -g -O2
>> -D_THREAD_SAFE -Wno-long-double -MT eLut.o -MD -MP -MF
>> ".deps/eLut.Tpo" -c -o eLut.o eLut.cpp; \
>> then mv -f ".deps/eLut.Tpo" ".deps/eLut.Po"; else rm -f
>> ".deps/eLut.Tpo"; exit 1; fi
>> cc1plus: error: unrecognized command line option "-Wno-long-double"
>> make[1]: *** [eLut.o] Error 1
>> make: *** [all-recursive] Error 1
>>
>>
>>
>> --------------------------------------
>> config.log
>>
>>
>> This file contains any messages produced by compilers while
>> running configure, to aid debugging if configure makes a mistake.
>>
>> It was created by IlmBase configure 1.0.2, which was
>> generated by GNU Autoconf 2.59. Invocation command line was
>>
>> $ ./configure
>>
>> ## --------- ##
>> ## Platform. ##
>> ## --------- ##
>>
>> hostname = bleeps.local
>> uname -m = i386
>> uname -r = 10.4.0
>> uname -s = Darwin
>> uname -v = Darwin Kernel Version 10.4.0: Fri Apr 23 18:28:53 PDT 2010;
>> root:xnu-1504.7.4~1/RELEASE_I386
>>
>> /usr/bin/uname -p = i386
>> /bin/uname -X = unknown
>>
>> /bin/arch = unknown
>> /usr/bin/arch -k = unknown
>> /usr/convex/getsysinfo = unknown
>> hostinfo = Mach kernel version:
>> Darwin Kernel Version 10.4.0: Fri Apr 23 18:28:53 PDT 2010;
>> root:xnu-1504.7.4~1/RELEASE_I386
>> Kernel configured for up to 4 processors.
>> 2 processors are physically available.
>> 4 processors are logically available.
>> Processor type: i486 (Intel 80486)
>> Processors active: 0 1 2 3
>> Primary memory available: 4.00 gigabytes
>> Default processor set: 132 tasks, 612 threads, 4 processors
>> Load average: 1.25, Mach factor: 2.74
>> /bin/machine = unknown
>> /usr/bin/oslevel = unknown
>> /bin/universe = unknown
>>
>> PATH: /opt/local/bin
>> PATH: /opt/local/sbin
>> PATH: /usr/bin
>> PATH: /bin
>> PATH: /usr/sbin
>> PATH: /sbin
>> PATH: /usr/local/bin
>> PATH: /usr/X11/bin
>>
>>
>> ## ----------- ##
>> ## Core tests. ##
>> ## ----------- ##
>>
>> configure:1554: checking build system type
>> configure:1572: result: i686-apple-darwin10.4.0
>> configure:1580: checking host system type
>> configure:1594: result: i686-apple-darwin10.4.0
>> configure:1619: checking for a BSD-compatible install
>> configure:1674: result: /usr/bin/install -c
>> configure:1685: checking whether build environment is sane
>> configure:1728: result: yes
>> configure:1793: checking for gawk
>> configure:1822: result: no
>> configure:1793: checking for mawk
>> configure:1822: result: no
>> configure:1793: checking for nawk
>> configure:1822: result: no
>> configure:1793: checking for awk
>> configure:1809: found /usr/bin/awk
>> configure:1819: result: awk
>> configure:1829: checking whether make sets $(MAKE)
>> configure:1849: result: yes
>> configure:2016: checking whether to enable maintainer-specific
>> portions of Makefiles
>> configure:2025: result: no
>> configure:2100: checking for g++
>> configure:2116: found /usr/bin/g++
>> configure:2126: result: g++
>> configure:2142: checking for C++ compiler version
>> configure:2145: g++ --version</dev/null>&5
>> i686-apple-darwin10-g++-4.2.1 (GCC) 4.2.1 (Apple Inc. build 5659)
>> Copyright (C) 2007 Free Software Foundation, Inc.
>> This is free software; see the source for copying conditions. There is NO
>> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
>> PURPOSE.
>>
>> configure:2148: $? = 0
>> configure:2150: g++ -v</dev/null>&5
>> Using built-in specs.
>> Target: i686-apple-darwin10
>> Configured with: /var/tmp/gcc/gcc-5659~1/src/configure
>> --disable-checking --enable-werror --prefix=/usr --mandir=/share/man
>> --enable-languages=c,objc,c++,obj-c++
>> --program-transform-name=/^[cg][^.-]*$/s/$/-4.2/
>> --with-slibdir=/usr/lib --build=i686-apple-darwin10
>> --program-prefix=i686-apple-darwin10- --host=x86_64-apple-darwin10
>> --target=i686-apple-darwin10 --with-gxx-include-dir=/include/c++/4.2.1
>> Thread model: posix
>> gcc version 4.2.1 (Apple Inc. build 5659)
>> configure:2153: $? = 0
>> configure:2155: g++ -V</dev/null>&5
>> g++-4.2: argument to `-V' is missing
>> configure:2158: $? = 1
>> configure:2181: checking for C++ compiler default output file name
>> configure:2184: g++ conftest.cc>&5
>> configure:2187: $? = 0
>> configure:2233: result: a.out
>> configure:2238: checking whether the C++ compiler works
>> configure:2244: ./a.out
>> configure:2247: $? = 0
>> configure:2264: result: yes
>> configure:2271: checking whether we are cross compiling
>> configure:2273: result: no
>> configure:2276: checking for suffix of executables
>> configure:2278: g++ -o conftest conftest.cc>&5
>> configure:2281: $? = 0
>> configure:2306: result:
>> configure:2312: checking for suffix of object files
>> configure:2333: g++ -c conftest.cc>&5
>> configure:2336: $? = 0
>> configure:2358: result: o
>> configure:2362: checking whether we are using the GNU C++ compiler
>> configure:2386: g++ -c conftest.cc>&5
>> configure:2392: $? = 0
>> configure:2396: test -z
>> || test ! -s conftest.err
>> configure:2399: $? = 0
>> configure:2402: test -s conftest.o
>> configure:2405: $? = 0
>> configure:2418: result: yes
>> configure:2424: checking whether g++ accepts -g
>> configure:2445: g++ -c -g conftest.cc>&5
>> configure:2451: $? = 0
>> configure:2455: test -z
>> || test ! -s conftest.err
>> configure:2458: $? = 0
>> configure:2461: test -s conftest.o
>> configure:2464: $? = 0
>> configure:2475: result: yes
>> configure:2517: g++ -c -g -O2 conftest.cc>&5
>> configure:2523: $? = 0
>> configure:2527: test -z
>> || test ! -s conftest.err
>> configure:2530: $? = 0
>> configure:2533: test -s conftest.o
>> configure:2536: $? = 0
>> configure:2562: g++ -c -g -O2 conftest.cc>&5
>> conftest.cc: In function 'int main()':
>> conftest.cc:15: error: 'exit' was not declared in this scope
>> configure:2568: $? = 1
>> configure: failed program was:
>> | /* confdefs.h. */
>> |
>> | #define PACKAGE_NAME "IlmBase"
>> | #define PACKAGE_TARNAME "ilmbase"
>> | #define PACKAGE_VERSION "1.0.2"
>> | #define PACKAGE_STRING "IlmBase 1.0.2"
>> | #define PACKAGE_BUGREPORT ""
>> | #define PACKAGE "ilmbase"
>> | #define VERSION "1.0.2"
>> | /* end confdefs.h. */
>> |
>> | int
>> | main ()
>> | {
>> | exit (42);
>> | ;
>> | return 0;
>> | }
>> configure:2517: g++ -c -g -O2 conftest.cc>&5
>> conftest.cc:11: error: 'void std::exit(int)' should have been declared
>> inside 'std'
>> In file included from conftest.cc:12:
>> /usr/include/stdlib.h:159: error: declaration of 'void std::exit(int)'
>> throws different exceptions
>> conftest.cc:11: error: from previous declaration 'void std::exit(int)
>> throw ()'
>> configure:2523: $? = 1
>> configure: failed program was:
>> | /* confdefs.h. */
>> |
>> | #define PACKAGE_NAME "IlmBase"
>> | #define PACKAGE_TARNAME "ilmbase"
>> | #define PACKAGE_VERSION "1.0.2"
>> | #define PACKAGE_STRING "IlmBase 1.0.2"
>> | #define PACKAGE_BUGREPORT ""
>> | #define PACKAGE "ilmbase"
>> | #define VERSION "1.0.2"
>> | /* end confdefs.h. */
>> | extern "C" void std::exit (int) throw (); using std::exit;
>> | #include<stdlib.h>
>> | int
>> | main ()
>> | {
>> | exit (42);
>> | ;
>> | return 0;
>> | }
>> configure:2517: g++ -c -g -O2 conftest.cc>&5
>> conftest.cc:11: error: 'void std::exit(int)' should have been declared
>> inside 'std'
>> configure:2523: $? = 1
>> configure: failed program was:
>> | /* confdefs.h. */
>> |
>> | #define PACKAGE_NAME "IlmBase"
>> | #define PACKAGE_TARNAME "ilmbase"
>> | #define PACKAGE_VERSION "1.0.2"
>> | #define PACKAGE_STRING "IlmBase 1.0.2"
>> | #define PACKAGE_BUGREPORT ""
>> | #define PACKAGE "ilmbase"
>> | #define VERSION "1.0.2"
>> | /* end confdefs.h. */
>> | extern "C" void std::exit (int); using std::exit;
>> | #include<stdlib.h>
>> | int
>> | main ()
>> | {
>> | exit (42);
>> | ;
>> | return 0;
>> | }
>> configure:2517: g++ -c -g -O2 conftest.cc>&5
>> In file included from conftest.cc:12:
>> /usr/include/stdlib.h:159: error: declaration of 'void exit(int)'
>> throws different exceptions
>> conftest.cc:11: error: from previous declaration 'void exit(int) throw ()'
>> configure:2523: $? = 1
>> configure: failed program was:
>> | /* confdefs.h. */
>> |
>> | #define PACKAGE_NAME "IlmBase"
>> | #define PACKAGE_TARNAME "ilmbase"
>> | #define PACKAGE_VERSION "1.0.2"
>> | #define PACKAGE_STRING "IlmBase 1.0.2"
>> | #define PACKAGE_BUGREPORT ""
>> | #define PACKAGE "ilmbase"
>> | #define VERSION "1.0.2"
>> | /* end confdefs.h. */
>> | extern "C" void exit (int) throw ();
>> | #include<stdlib.h>
>> | int
>> | main ()
>> | {
>> | exit (42);
>> | ;
>> | return 0;
>> | }
>> configure:2517: g++ -c -g -O2 conftest.cc>&5
>> configure:2523: $? = 0
>> configure:2527: test -z
>> || test ! -s conftest.err
>> configure:2530: $? = 0
>> configure:2533: test -s conftest.o
>> configure:2536: $? = 0
>> configure:2562: g++ -c -g -O2 conftest.cc>&5
>> configure:2568: $? = 0
>> configure:2572: test -z
>> || test ! -s conftest.err
>> configure:2575: $? = 0
>> configure:2578: test -s conftest.o
>> configure:2581: $? = 0
>> configure:2615: checking for style of include used by make
>> configure:2643: result: GNU
>> configure:2671: checking dependency style of g++
>> configure:2761: result: gcc3
>> configure:2791: checking for a BSD-compatible install
>> configure:2846: result: /usr/bin/install -c
>> configure:2903: checking for gcc
>> configure:2919: found /usr/bin/gcc
>> configure:2929: result: gcc
>> configure:3173: checking for C compiler version
>> configure:3176: gcc --version</dev/null>&5
>> i686-apple-darwin10-gcc-4.2.1 (GCC) 4.2.1 (Apple Inc. build 5659)
>> Copyright (C) 2007 Free Software Foundation, Inc.
>> This is free software; see the source for copying conditions. There is NO
>> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
>> PURPOSE.
>>
>> configure:3179: $? = 0
>> configure:3181: gcc -v</dev/null>&5
>> Using built-in specs.
>> Target: i686-apple-darwin10
>> Configured with: /var/tmp/gcc/gcc-5659~1/src/configure
>> --disable-checking --enable-werror --prefix=/usr --mandir=/share/man
>> --enable-languages=c,objc,c++,obj-c++
>> --program-transform-name=/^[cg][^.-]*$/s/$/-4.2/
>> --with-slibdir=/usr/lib --build=i686-apple-darwin10
>> --program-prefix=i686-apple-darwin10- --host=x86_64-apple-darwin10
>> --target=i686-apple-darwin10 --with-gxx-include-dir=/include/c++/4.2.1
>> Thread model: posix
>> gcc version 4.2.1 (Apple Inc. build 5659)
>> configure:3184: $? = 0
>> configure:3186: gcc -V</dev/null>&5
>> gcc-4.2: argument to `-V' is missing
>> configure:3189: $? = 1
>> configure:3192: checking whether we are using the GNU C compiler
>> configure:3216: gcc -c conftest.c>&5
>> configure:3222: $? = 0
>> configure:3226: test -z
>> || test ! -s conftest.err
>> configure:3229: $? = 0
>> configure:3232: test -s conftest.o
>> configure:3235: $? = 0
>> configure:3248: result: yes
>> configure:3254: checking whether gcc accepts -g
>> configure:3275: gcc -c -g conftest.c>&5
>> configure:3281: $? = 0
>> configure:3285: test -z
>> || test ! -s conftest.err
>> configure:3288: $? = 0
>> configure:3291: test -s conftest.o
>> configure:3294: $? = 0
>> configure:3305: result: yes
>> configure:3322: checking for gcc option to accept ANSI C
>> configure:3392: gcc -c -g -O2 conftest.c>&5
>> configure:3398: $? = 0
>> configure:3402: test -z
>> || test ! -s conftest.err
>> configure:3405: $? = 0
>> configure:3408: test -s conftest.o
>> configure:3411: $? = 0
>> configure:3429: result: none needed
>> configure:3447: gcc -c -g -O2 conftest.c>&5
>> conftest.c:2: error: expected '=', ',', ';', 'asm' or '__attribute__'
>> before 'me'
>> configure:3453: $? = 1
>> configure: failed program was:
>> | #ifndef __cplusplus
>> | choke me
>> | #endif
>> configure:3588: checking dependency style of gcc
>> configure:3678: result: gcc3
>> configure:3695: checking whether ln -s works
>> configure:3699: result: yes
>> configure:3778: checking for a sed that does not truncate output
>> configure:3834: result: /usr/bin/sed
>> configure:3837: checking for egrep
>> configure:3847: result: grep -E
>> configure:3863: checking for ld used by gcc
>> configure:3930: result: /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld
>> configure:3939: checking if the linker
>> (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) is GNU ld
>> configure:3954: result: no
>> configure:3959: checking for
>> /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld option to reload object
>> files
>> configure:3966: result: -r
>> configure:3984: checking for BSD-compatible nm
>> configure:4033: result: /usr/bin/nm
>> configure:4037: checking how to recognise dependent libraries
>> configure:4213: result: pass_all
>> configure:4450: checking how to run the C preprocessor
>> configure:4485: gcc -E conftest.c
>> configure:4491: $? = 0
>> configure:4523: gcc -E conftest.c
>> conftest.c:14:28: error: ac_nonexistent.h: No such file or directory
>> configure:4529: $? = 1
>> configure: failed program was:
>> | /* confdefs.h. */
>> |
>> | #define PACKAGE_NAME "IlmBase"
>> | #define PACKAGE_TARNAME "ilmbase"
>> | #define PACKAGE_VERSION "1.0.2"
>> | #define PACKAGE_STRING "IlmBase 1.0.2"
>> | #define PACKAGE_BUGREPORT ""
>> | #define PACKAGE "ilmbase"
>> | #define VERSION "1.0.2"
>> | #ifdef __cplusplus
>> | extern "C" void exit (int);
>> | #endif
>> | /* end confdefs.h. */
>> | #include<ac_nonexistent.h>
>> configure:4568: result: gcc -E
>> configure:4592: gcc -E conftest.c
>> configure:4598: $? = 0
>> configure:4630: gcc -E conftest.c
>> conftest.c:14:28: error: ac_nonexistent.h: No such file or directory
>> configure:4636: $? = 1
>> configure: failed program was:
>> | /* confdefs.h. */
>> |
>> | #define PACKAGE_NAME "IlmBase"
>> | #define PACKAGE_TARNAME "ilmbase"
>> | #define PACKAGE_VERSION "1.0.2"
>> | #define PACKAGE_STRING "IlmBase 1.0.2"
>> | #define PACKAGE_BUGREPORT ""
>> | #define PACKAGE "ilmbase"
>> | #define VERSION "1.0.2"
>> | #ifdef __cplusplus
>> | extern "C" void exit (int);
>> | #endif
>> | /* end confdefs.h. */
>> | #include<ac_nonexistent.h>
>> configure:4680: checking for ANSI C header files
>> configure:4705: gcc -c -g -O2 conftest.c>&5
>> configure:4711: $? = 0
>> configure:4715: test -z
>> || test ! -s conftest.err
>> configure:4718: $? = 0
>> configure:4721: test -s conftest.o
>> configure:4724: $? = 0
>> configure:4813: gcc -o conftest -g -O2 conftest.c>&5
>> conftest.c: In function 'main':
>> conftest.c:31: warning: incompatible implicit declaration of built-in
>> function 'exit'
>> configure:4816: $? = 0
>> configure:4818: ./conftest
>> configure:4821: $? = 0
>> configure:4836: result: yes
>> configure:4860: checking for sys/types.h
>> configure:4876: gcc -c -g -O2 conftest.c>&5
>> configure:4882: $? = 0
>> configure:4886: test -z
>> || test ! -s conftest.err
>> configure:4889: $? = 0
>> configure:4892: test -s conftest.o
>> configure:4895: $? = 0
>> configure:4906: result: yes
>> configure:4860: checking for sys/stat.h
>> configure:4876: gcc -c -g -O2 conftest.c>&5
>> configure:4882: $? = 0
>> configure:4886: test -z
>> || test ! -s conftest.err
>> configure:4889: $? = 0
>> configure:4892: test -s conftest.o
>> configure:4895: $? = 0
>> configure:4906: result: yes
>> configure:4860: checking for stdlib.h
>> configure:4876: gcc -c -g -O2 conftest.c>&5
>> configure:4882: $? = 0
>> configure:4886: test -z
>> || test ! -s conftest.err
>> configure:4889: $? = 0
>> configure:4892: test -s conftest.o
>> configure:4895: $? = 0
>> configure:4906: result: yes
>> configure:4860: checking for string.h
>> configure:4876: gcc -c -g -O2 conftest.c>&5
>> configure:4882: $? = 0
>> configure:4886: test -z
>> || test ! -s conftest.err
>> configure:4889: $? = 0
>> configure:4892: test -s conftest.o
>> configure:4895: $? = 0
>> configure:4906: result: yes
>> configure:4860: checking for memory.h
>> configure:4876: gcc -c -g -O2 conftest.c>&5
>> configure:4882: $? = 0
>> configure:4886: test -z
>> || test ! -s conftest.err
>> configure:4889: $? = 0
>> configure:4892: test -s conftest.o
>> configure:4895: $? = 0
>> configure:4906: result: yes
>> configure:4860: checking for strings.h
>> configure:4876: gcc -c -g -O2 conftest.c>&5
>> configure:4882: $? = 0
>> configure:4886: test -z
>> || test ! -s conftest.err
>> configure:4889: $? = 0
>> configure:4892: test -s conftest.o
>> configure:4895: $? = 0
>> configure:4906: result: yes
>> configure:4860: checking for inttypes.h
>> configure:4876: gcc -c -g -O2 conftest.c>&5
>> configure:4882: $? = 0
>> configure:4886: test -z
>> || test ! -s conftest.err
>> configure:4889: $? = 0
>> configure:4892: test -s conftest.o
>> configure:4895: $? = 0
>> configure:4906: result: yes
>> configure:4860: checking for stdint.h
>> configure:4876: gcc -c -g -O2 conftest.c>&5
>> configure:4882: $? = 0
>> configure:4886: test -z
>> || test ! -s conftest.err
>> configure:4889: $? = 0
>> configure:4892: test -s conftest.o
>> configure:4895: $? = 0
>> configure:4906: result: yes
>> configure:4860: checking for unistd.h
>> configure:4876: gcc -c -g -O2 conftest.c>&5
>> configure:4882: $? = 0
>> configure:4886: test -z
>> || test ! -s conftest.err
>> configure:4889: $? = 0
>> configure:4892: test -s conftest.o
>> configure:4895: $? = 0
>> configure:4906: result: yes
>> configure:4932: checking dlfcn.h usability
>> configure:4944: gcc -c -g -O2 conftest.c>&5
>> configure:4950: $? = 0
>> configure:4954: test -z
>> || test ! -s conftest.err
>> configure:4957: $? = 0
>> configure:4960: test -s conftest.o
>> configure:4963: $? = 0
>> configure:4973: result: yes
>> configure:4977: checking dlfcn.h presence
>> configure:4987: gcc -E conftest.c
>> configure:4993: $? = 0
>> configure:5013: result: yes
>> configure:5048: checking for dlfcn.h
>> configure:5055: result: yes
>> configure:5078: checking how to run the C++ preprocessor
>> configure:5109: g++ -E conftest.cc
>> configure:5115: $? = 0
>> configure:5147: g++ -E conftest.cc
>> conftest.cc:25:28: error: ac_nonexistent.h: No such file or directory
>> configure:5153: $? = 1
>> configure: failed program was:
>> | /* confdefs.h. */
>> |
>> | #define PACKAGE_NAME "IlmBase"
>> | #define PACKAGE_TARNAME "ilmbase"
>> | #define PACKAGE_VERSION "1.0.2"
>> | #define PACKAGE_STRING "IlmBase 1.0.2"
>> | #define PACKAGE_BUGREPORT ""
>> | #define PACKAGE "ilmbase"
>> | #define VERSION "1.0.2"
>> | #ifdef __cplusplus
>> | extern "C" void exit (int);
>> | #endif
>> | #define STDC_HEADERS 1
>> | #define HAVE_SYS_TYPES_H 1
>> | #define HAVE_SYS_STAT_H 1
>> | #define HAVE_STDLIB_H 1
>> | #define HAVE_STRING_H 1
>> | #define HAVE_MEMORY_H 1
>> | #define HAVE_STRINGS_H 1
>> | #define HAVE_INTTYPES_H 1
>> | #define HAVE_STDINT_H 1
>> | #define HAVE_UNISTD_H 1
>> | #define HAVE_DLFCN_H 1
>> | /* end confdefs.h. */
>> | #include<ac_nonexistent.h>
>> configure:5192: result: g++ -E
>> configure:5216: g++ -E conftest.cc
>> configure:5222: $? = 0
>> configure:5254: g++ -E conftest.cc
>> conftest.cc:25:28: error: ac_nonexistent.h: No such file or directory
>> configure:5260: $? = 1
>> configure: failed program was:
>> | /* confdefs.h. */
>> |
>> | #define PACKAGE_NAME "IlmBase"
>> | #define PACKAGE_TARNAME "ilmbase"
>> | #define PACKAGE_VERSION "1.0.2"
>> | #define PACKAGE_STRING "IlmBase 1.0.2"
>> | #define PACKAGE_BUGREPORT ""
>> | #define PACKAGE "ilmbase"
>> | #define VERSION "1.0.2"
>> | #ifdef __cplusplus
>> | extern "C" void exit (int);
>> | #endif
>> | #define STDC_HEADERS 1
>> | #define HAVE_SYS_TYPES_H 1
>> | #define HAVE_SYS_STAT_H 1
>> | #define HAVE_STDLIB_H 1
>> | #define HAVE_STRING_H 1
>> | #define HAVE_MEMORY_H 1
>> | #define HAVE_STRINGS_H 1
>> | #define HAVE_INTTYPES_H 1
>> | #define HAVE_STDINT_H 1
>> | #define HAVE_UNISTD_H 1
>> | #define HAVE_DLFCN_H 1
>> | /* end confdefs.h. */
>> | #include<ac_nonexistent.h>
>> configure:5357: checking for g77
>> configure:5386: result: no
>> configure:5357: checking for f77
>> configure:5386: result: no
>> configure:5357: checking for xlf
>> configure:5386: result: no
>> configure:5357: checking for frt
>> configure:5386: result: no
>> configure:5357: checking for pgf77
>> configure:5386: result: no
>> configure:5357: checking for fort77
>> configure:5386: result: no
>> configure:5357: checking for fl32
>> configure:5386: result: no
>> configure:5357: checking for af77
>> configure:5386: result: no
>> configure:5357: checking for f90
>> configure:5386: result: no
>> configure:5357: checking for xlf90
>> configure:5386: result: no
>> configure:5357: checking for pgf90
>> configure:5386: result: no
>> configure:5357: checking for epcf90
>> configure:5386: result: no
>> configure:5357: checking for f95
>> configure:5386: result: no
>> configure:5357: checking for fort
>> configure:5386: result: no
>> configure:5357: checking for xlf95
>> configure:5386: result: no
>> configure:5357: checking for ifc
>> configure:5386: result: no
>> configure:5357: checking for efc
>> configure:5386: result: no
>> configure:5357: checking for pgf95
>> configure:5386: result: no
>> configure:5357: checking for lf95
>> configure:5386: result: no
>> configure:5357: checking for gfortran
>> configure:5386: result: no
>> configure:5398: checking for Fortran 77 compiler version
>> configure:5401: --version</dev/null>&5
>> ./configure: line 5402: --version: command not found
>> configure:5404: $? = 127
>> configure:5406: -v</dev/null>&5
>> ./configure: line 5407: -v: command not found
>> configure:5409: $? = 127
>> configure:5411: -V</dev/null>&5
>> ./configure: line 5412: -V: command not found
>> configure:5414: $? = 127
>> configure:5422: checking whether we are using the GNU Fortran 77 compiler
>> configure:5436: -c conftest.F>&5
>> ./configure: line 5437: -c: command not found
>> configure:5442: $? = 127
>> configure: failed program was:
>> | program main
>> | #ifndef __GNUC__
>> | choke me
>> | #endif
>> |
>> | end
>> configure:5468: result: no
>> configure:5474: checking whether accepts -g
>> configure:5486: -c -g conftest.f>&5
>> ./configure: line 5487: -c: command not found
>> configure:5492: $? = 127
>> configure: failed program was:
>> | program main
>> |
>> | end
>> configure:5517: result: no
>> configure:5547: checking the maximum length of command line arguments
>> configure:5656: result: 196608
>> configure:5667: checking command to parse /usr/bin/nm output from gcc
>> object
>> configure:5772: gcc -c -g -O2 conftest.c>&5
>> configure:5775: $? = 0
>> configure:5779: /usr/bin/nm conftest.o \| sed -n -e 's/^.*[
>> ]\([BCDEGRST][BCDEGRST]*\)[ ][
>> ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2
>> \2/p' \> conftest.nm
>> configure:5782: $? = 0
>> cannot find nm_test_var in conftest.nm
>> configure:5772: gcc -c -g -O2 conftest.c>&5
>> configure:5775: $? = 0
>> configure:5779: /usr/bin/nm conftest.o \| sed -n -e 's/^.*[
>> ]\([BCDEGRST][BCDEGRST]*\)[ ][
>> ]*_\([_A-Za-z][_A-Za-z0-9]*\)$/\1
>> _\2 \2/p' \> conftest.nm
>> configure:5782: $? = 0
>> configure:5834: gcc -o conftest -g -O2 conftest.c conftstm.o>&5
>> configure:5837: $? = 0
>> configure:5875: result: ok
>> configure:5879: checking for objdir
>> configure:5894: result: .libs
>> configure:5984: checking for ar
>> configure:6000: found /usr/bin/ar
>> configure:6011: result: ar
>> configure:6064: checking for ranlib
>> configure:6080: found /usr/bin/ranlib
>> configure:6091: result: ranlib
>> configure:6144: checking for strip
>> configure:6160: found /usr/bin/strip
>> configure:6171: result: strip
>> configure:6443: checking if gcc supports -fno-rtti -fno-exceptions
>> configure:6461: gcc -c -g -O2 -fno-rtti -fno-exceptions conftest.c>&5
>> cc1: warning: command line option "-fno-rtti" is valid for C++/ObjC++
>> but not for C
>> configure:6465: $? = 0
>> configure:6478: result: no
>> configure:6493: checking for gcc option to produce PIC
>> configure:6703: result: -fno-common
>> configure:6711: checking if gcc PIC flag -fno-common works
>> configure:6729: gcc -c -g -O2 -fno-common -DPIC conftest.c>&5
>> configure:6733: $? = 0
>> configure:6746: result: yes
>> configure:6774: checking if gcc static flag -static works
>> configure:6802: result: no
>> configure:6812: checking if gcc supports -c -o file.o
>> configure:6833: gcc -c -g -O2 -o out/conftest2.o conftest.c>&5
>> configure:6837: $? = 0
>> configure:6859: result: yes
>> configure:6885: checking whether the gcc linker
>> (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared
>> libraries
>> configure:7843: result: yes
>> configure:7910: checking dynamic linker characteristics
>> configure:8519: result: darwin10.4.0 dyld
>> configure:8528: checking how to hardcode library paths into programs
>> configure:8553: result: immediate
>> configure:8567: checking whether stripping libraries is possible
>> configure:8580: result: yes
>> configure:9406: checking if libtool supports shared libraries
>> configure:9408: result: yes
>> configure:9411: checking whether to build shared libraries
>> configure:9432: result: yes
>> configure:9435: checking whether to build static libraries
>> configure:9439: result: yes
>> configure:9531: creating libtool
>> configure:10122: checking for ld used by g++
>> configure:10189: result: /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld
>> configure:10198: checking if the linker
>> (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) is GNU ld
>> configure:10213: result: no
>> configure:10264: checking whether the g++ linker
>> (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared
>> libraries
>> configure:11202: result: yes
>> configure:11220: g++ -c -g -O2 conftest.cpp>&5
>> configure:11223: $? = 0
>> configure:11342: checking for g++ option to produce PIC
>> configure:11616: result: -fno-common
>> configure:11624: checking if g++ PIC flag -fno-common works
>> configure:11642: g++ -c -g -O2 -fno-common -DPIC conftest.cpp>&5
>> configure:11646: $? = 0
>> configure:11659: result: yes
>> configure:11687: checking if g++ static flag -static works
>> configure:11715: result: no
>> configure:11725: checking if g++ supports -c -o file.o
>> configure:11746: g++ -c -g -O2 -o out/conftest2.o conftest.cpp>&5
>> configure:11750: $? = 0
>> configure:11772: result: yes
>> configure:11798: checking whether the g++ linker
>> (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared
>> libraries
>> configure:11823: result: yes
>> configure:11890: checking dynamic linker characteristics
>> configure:12499: result: darwin10.4.0 dyld
>> configure:12508: checking how to hardcode library paths into programs
>> configure:12533: result: immediate
>> configure:18737: checking whether make sets $(MAKE)
>> configure:18757: result: yes
>> configure:18977: checking for the pthreads library -lpthreads
>> configure:19015: gcc -o conftest -g -O2 conftest.c -lpthreads>&5
>> ld: library not found for -lpthreads
>> collect2: ld returned 1 exit status
>> configure:19021: $? = 1
>> configure: failed program was:
>> | /* confdefs.h. */
>> |
>> | #define PACKAGE_NAME "IlmBase"
>> | #define PACKAGE_TARNAME "ilmbase"
>> | #define PACKAGE_VERSION "1.0.2"
>> | #define PACKAGE_STRING "IlmBase 1.0.2"
>> | #define PACKAGE_BUGREPORT ""
>> | #define PACKAGE "ilmbase"
>> | #define VERSION "1.0.2"
>> | #ifdef __cplusplus
>> | extern "C" void exit (int);
>> | #endif
>> | #define STDC_HEADERS 1
>> | #define HAVE_SYS_TYPES_H 1
>> | #define HAVE_SYS_STAT_H 1
>> | #define HAVE_STDLIB_H 1
>> | #define HAVE_STRING_H 1
>> | #define HAVE_MEMORY_H 1
>> | #define HAVE_STRINGS_H 1
>> | #define HAVE_INTTYPES_H 1
>> | #define HAVE_STDINT_H 1
>> | #define HAVE_UNISTD_H 1
>> | #define HAVE_DLFCN_H 1
>> | /* end confdefs.h. */
>> | #include<pthread.h>
>> | int
>> | main ()
>> | {
>> | pthread_t th; pthread_join(th, 0);
>> | pthread_attr_init(0); pthread_cleanup_push(0, 0);
>> | pthread_create(0,0,0,0); pthread_cleanup_pop(0);
>> | ;
>> | return 0;
>> | }
>> configure:19048: result: no
>> configure:18923: checking whether pthreads work without any flags
>> configure:19015: gcc -o conftest -g -O2 conftest.c>&5
>> configure:19021: $? = 0
>> configure:19025: test -z
>> || test ! -s conftest.err
>> configure:19028: $? = 0
>> configure:19031: test -s conftest
>> configure:19034: $? = 0
>> configure:19048: result: yes
>> configure:19067: checking for joinable pthread attribute
>> configure:19087: gcc -o conftest -g -O2 conftest.c>&5
>> configure:19093: $? = 0
>> configure:19097: test -z
>> || test ! -s conftest.err
>> configure:19100: $? = 0
>> configure:19103: test -s conftest
>> configure:19106: $? = 0
>> configure:19117: result: PTHREAD_CREATE_JOINABLE
>> configure:19127: checking if more special flags are required for pthreads
>> configure:19134: result: -D_THREAD_SAFE
>> configure:19146: checking for cc_r
>> configure:19173: result: gcc
>> configure:19223: checking semaphore.h usability
>> configure:19235: gcc -c -g -O2 -D_THREAD_SAFE conftest.c>&5
>> configure:19241: $? = 0
>> configure:19245: test -z
>> || test ! -s conftest.err
>> configure:19248: $? = 0
>> configure:19251: test -s conftest.o
>> configure:19254: $? = 0
>> configure:19264: result: yes
>> configure:19268: checking semaphore.h presence
>> configure:19278: gcc -E conftest.c
>> configure:19284: $? = 0
>> configure:19304: result: yes
>> configure:19339: checking for semaphore.h
>> configure:19346: result: yes
>> configure:19355: checking for library containing sem_init
>> configure:19385: gcc -o conftest -g -O2 -D_THREAD_SAFE conftest.c>&5
>> configure:19391: $? = 0
>> configure:19395: test -z
>> || test ! -s conftest.err
>> configure:19398: $? = 0
>> configure:19401: test -s conftest
>> configure:19404: $? = 0
>> configure:19474: result: none required
>> configure:19479: checking whether to use POSIX unnamed semaphores
>> configure:19516: gcc -o conftest -g -O2 -D_THREAD_SAFE conftest.c>&5
>> configure:19519: $? = 0
>> configure:19521: ./conftest
>> configure:19524: $? = 1
>> configure: program exited with status 1
>> configure: failed program was:
>> |
>> | /* confdefs.h. */
>> |
>> | #define PACKAGE_NAME "IlmBase"
>> | #define PACKAGE_TARNAME "ilmbase"
>> | #define PACKAGE_VERSION "1.0.2"
>> | #define PACKAGE_STRING "IlmBase 1.0.2"
>> | #define PACKAGE_BUGREPORT ""
>> | #define PACKAGE "ilmbase"
>> | #define VERSION "1.0.2"
>> | #ifdef __cplusplus
>> | extern "C" void exit (int);
>> | #endif
>> | #define STDC_HEADERS 1
>> | #define HAVE_SYS_TYPES_H 1
>> | #define HAVE_SYS_STAT_H 1
>> | #define HAVE_STDLIB_H 1
>> | #define HAVE_STRING_H 1
>> | #define HAVE_MEMORY_H 1
>> | #define HAVE_STRINGS_H 1
>> | #define HAVE_INTTYPES_H 1
>> | #define HAVE_STDINT_H 1
>> | #define HAVE_UNISTD_H 1
>> | #define HAVE_DLFCN_H 1
>> | #define HAVE_PTHREAD 1
>> | #define HAVE_SEMAPHORE_H 1
>> | /* end confdefs.h. */
>> | #include<semaphore.h>
>> | int
>> | main ()
>> | {
>> |
>> | sem_t mysem;
>> | if (sem_init (&mysem, 1, 1) == 0)
>> | {
>> | if (sem_wait (&mysem) == 0)
>> | {
>> | sem_post (&mysem);
>> | sem_destroy (&mysem);
>> | return 0;
>> | }
>> | }
>> | return 1;
>> |
>> | ;
>> | return 0;
>> | }
>> |
>> configure:19537: result: no (pshared not usable)
>> configure:19580: multithread true, LIBS = , CC = gcc, CXXFLAGS = -g
>> -O2 -D_THREAD_SAFE
>> configure:19584: checking for ANSI C header files
>> configure:19740: result: yes
>> configure:19765: checking limits.h usability
>> configure:19777: gcc -c -g -O2 -D_THREAD_SAFE conftest.c>&5
>> configure:19783: $? = 0
>> configure:19787: test -z
>> || test ! -s conftest.err
>> configure:19790: $? = 0
>> configure:19793: test -s conftest.o
>> configure:19796: $? = 0
>> configure:19806: result: yes
>> configure:19810: checking limits.h presence
>> configure:19820: gcc -E conftest.c
>> configure:19826: $? = 0
>> configure:19846: result: yes
>> configure:19881: checking for limits.h
>> configure:19888: result: yes
>> configure:19756: checking for unistd.h
>> configure:19761: result: yes
>> configure:19902: checking for an ANSI C-conforming const
>> configure:19969: gcc -c -g -O2 -D_THREAD_SAFE conftest.c>&5
>> configure:19975: $? = 0
>> configure:19979: test -z
>> || test ! -s conftest.err
>> configure:19982: $? = 0
>> configure:19985: test -s conftest.o
>> configure:19988: $? = 0
>> configure:19999: result: yes
>> configure:20009: checking for inline
>> configure:20030: gcc -c -g -O2 -D_THREAD_SAFE conftest.c>&5
>> configure:20036: $? = 0
>> configure:20040: test -z
>> || test ! -s conftest.err
>> configure:20043: $? = 0
>> configure:20046: test -s conftest.o
>> configure:20049: $? = 0
>> configure:20061: result: inline
>> configure:20080: checking for size_t
>> configure:20104: gcc -c -g -O2 -D_THREAD_SAFE conftest.c>&5
>> configure:20110: $? = 0
>> configure:20114: test -z
>> || test ! -s conftest.err
>> configure:20117: $? = 0
>> configure:20120: test -s conftest.o
>> configure:20123: $? = 0
>> configure:20134: result: yes
>> configure:20151: checking for strerror
>> configure:20208: gcc -o conftest -g -O2 -D_THREAD_SAFE conftest.c>&5
>> configure:20214: $? = 0
>> configure:20218: test -z
>> || test ! -s conftest.err
>> configure:20221: $? = 0
>> configure:20224: test -s conftest
>> configure:20227: $? = 0
>> configure:20239: result: yes
>> configure:20251: checking for complete iomanip support in C++ standard
>> library
>> configure:20281: g++ -c -g -O2 -D_THREAD_SAFE conftest.cc>&5
>> configure:20287: $? = 0
>> configure:20291: test -z
>> || test ! -s conftest.err
>> configure:20294: $? = 0
>> configure:20297: test -s conftest.o
>> configure:20300: $? = 0
>> configure:20312: result: yes
>> configure:20322: checking for gcc optimization flags
>> configure:20342: gcc -c -g -O2 -D_THREAD_SAFE -pipe conftest.c>&5
>> configure:20348: $? = 0
>> configure:20352: test -z
>> || test ! -s conftest.err
>> configure:20355: $? = 0
>> configure:20358: test -s conftest.o
>> configure:20361: $? = 0
>> configure:20372: result: -pipe
>> configure:20575: creating ./config.status
>>
>> ## ---------------------- ##
>> ## Running config.status. ##
>> ## ---------------------- ##
>>
>> This file was extended by IlmBase config.status 1.0.2, which was
>> generated by GNU Autoconf 2.59. Invocation command line was
>>
>> CONFIG_FILES =
>> CONFIG_HEADERS =
>> CONFIG_LINKS =
>> CONFIG_COMMANDS =
>> $ ./config.status
>>
>> on bleeps.local
>>
>> config.status:736: creating Makefile
>> config.status:736: creating IlmBase.pc
>> config.status:736: creating config/Makefile
>> config.status:736: creating Half/Makefile
>> config.status:736: creating HalfTest/Makefile
>> config.status:736: creating Iex/Makefile
>> config.status:736: creating IexTest/Makefile
>> config.status:736: creating IlmThread/Makefile
>> config.status:736: creating Imath/Makefile
>> config.status:736: creating ImathTest/Makefile
>> config.status:736: creating vc/Makefile
>> config.status:840: creating config/IlmBaseConfig.h
>> config.status:1142: executing depfiles commands
>> configure:21917: result:
>> ---------------------------------------------
>> Summary for IlmBase features:
>>
>> OS X architectures default
>> OS X SDK default
>> OS X two-way universal build (deprecated) no
>> ---------------------------------------------
>>
>>
>> ## ---------------- ##
>> ## Cache variables. ##
>> ## ---------------- ##
>>
>> ac_cv_build=i686-apple-darwin10.4.0
>> ac_cv_build_alias=i686-apple-darwin10.4.0
>> ac_cv_c_compiler_gnu=yes
>> ac_cv_c_const=yes
>> ac_cv_c_inline=inline
>> ac_cv_cxx_compiler_gnu=yes
>> ac_cv_env_CC_set=
>> ac_cv_env_CC_value=
>> ac_cv_env_CFLAGS_set=
>> ac_cv_env_CFLAGS_value=
>> ac_cv_env_CPPFLAGS_set=
>> ac_cv_env_CPPFLAGS_value=
>> ac_cv_env_CPP_set=
>> ac_cv_env_CPP_value=
>> ac_cv_env_CXXCPP_set=
>> ac_cv_env_CXXCPP_value=
>> ac_cv_env_CXXFLAGS_set=
>> ac_cv_env_CXXFLAGS_value=
>> ac_cv_env_CXX_set=
>> ac_cv_env_CXX_value=
>> ac_cv_env_F77_set=
>> ac_cv_env_F77_value=
>> ac_cv_env_FFLAGS_set=
>> ac_cv_env_FFLAGS_value=
>> ac_cv_env_LDFLAGS_set=
>> ac_cv_env_LDFLAGS_value=
>> ac_cv_env_build_alias_set=
>> ac_cv_env_build_alias_value=
>> ac_cv_env_host_alias_set=
>> ac_cv_env_host_alias_value=
>> ac_cv_env_target_alias_set=
>> ac_cv_env_target_alias_value=
>> ac_cv_exeext=
>> ac_cv_f77_compiler_gnu=no
>> ac_cv_func_strerror=yes
>> ac_cv_header_dlfcn_h=yes
>> ac_cv_header_inttypes_h=yes
>> ac_cv_header_limits_h=yes
>> ac_cv_header_memory_h=yes
>> ac_cv_header_semaphore_h=yes
>> ac_cv_header_stdc=yes
>> ac_cv_header_stdint_h=yes
>> ac_cv_header_stdlib_h=yes
>> ac_cv_header_string_h=yes
>> ac_cv_header_strings_h=yes
>> ac_cv_header_sys_stat_h=yes
>> ac_cv_header_sys_types_h=yes
>> ac_cv_header_unistd_h=yes
>> ac_cv_host=i686-apple-darwin10.4.0
>> ac_cv_host_alias=i686-apple-darwin10.4.0
>> ac_cv_objext=o
>> ac_cv_path_install='/usr/bin/install -c'
>> ac_cv_prog_AWK=awk
>> ac_cv_prog_CPP='gcc -E'
>> ac_cv_prog_CXXCPP='g++ -E'
>> ac_cv_prog_PTHREAD_CC=gcc
>> ac_cv_prog_ac_ct_AR=ar
>> ac_cv_prog_ac_ct_CC=gcc
>> ac_cv_prog_ac_ct_CXX=g++
>> ac_cv_prog_ac_ct_RANLIB=ranlib
>> ac_cv_prog_ac_ct_STRIP=strip
>> ac_cv_prog_cc_g=yes
>> ac_cv_prog_cc_stdc=
>> ac_cv_prog_cxx_g=yes
>> ac_cv_prog_egrep='grep -E'
>> ac_cv_prog_f77_g=no
>> ac_cv_prog_make_make_set=yes
>> ac_cv_search_sem_init='none required'
>> ac_cv_type_size_t=yes
>> am_cv_CC_dependencies_compiler_type=gcc3
>> am_cv_CXX_dependencies_compiler_type=gcc3
>> lt_cv_deplibs_check_method=pass_all
>> lt_cv_file_magic_cmd='$MAGIC_CMD'
>> lt_cv_file_magic_test_file=
>> lt_cv_ld_reload_flag=-r
>> lt_cv_objdir=.libs
>> lt_cv_path_LD=/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld
>> lt_cv_path_LDCXX=/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld
>> lt_cv_path_NM=/usr/bin/nm
>> lt_cv_path_SED=/usr/bin/sed
>> lt_cv_prog_compiler_c_o=yes
>> lt_cv_prog_compiler_c_o_CXX=yes
>> lt_cv_prog_compiler_rtti_exceptions=no
>> lt_cv_prog_gnu_ld=no
>> lt_cv_prog_gnu_ldcxx=no
>> lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[
>> ]\([BCDEGRST][BCDEGRST]*\)[ ][
>> ]*_\([_A-Za-z][_A-Za-z0-9]*\)$/\1
>> _\2 \2/p'\'''
>> lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^
>> ]*\) $/ {\"\1\", (lt_ptr) 0},/p'\'' -e '\''s/^[BCDEGRST] \([^ ]*\)
>> \([^ ]*\)$/ {"\2", (lt_ptr) \&\2},/p'\'''
>> lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^. .* \(.*\)$/extern
>> int \1;/p'\'''
>> lt_cv_sys_max_cmd_len=196608
>> lt_lt_cv_prog_compiler_c_o='"yes"'
>> lt_lt_cv_prog_compiler_c_o_CXX='"yes"'
>> lt_lt_cv_sys_global_symbol_pipe='"sed -n -e '\''s/^.*[
>> ]\\([BCDEGRST][BCDEGRST]*\\)[ ][
>> ]*_\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 _\\2 \\2/p'\''"'
>> lt_lt_cv_sys_global_symbol_to_c_name_address='"sed -n -e '\''s/^:
>> \\([^ ]*\\) \$/ {\\\"\\1\\\", (lt_ptr) 0},/p'\'' -e '\''s/^[BCDEGRST]
>> \\([^ ]*\\) \\([^ ]*\\)\$/ {\"\\2\", (lt_ptr) \\&\\2},/p'\''"'
>> lt_lt_cv_sys_global_symbol_to_cdecl='"sed -n -e '\''s/^. .*
>> \\(.*\\)\$/extern int \\1;/p'\''"'
>>
>> ## ----------------- ##
>> ## Output variables. ##
>> ## ----------------- ##
>>
>> ACLOCAL='${SHELL} /Users/wesleysmith/Downloads/ilmbase-1.0.2/missing
>> --run aclocal-1.9'
>> AMDEPBACKSLASH='\'
>> AMDEP_FALSE='#'
>> AMDEP_TRUE=''
>> AMTAR='${SHELL} /Users/wesleysmith/Downloads/ilmbase-1.0.2/missing --run
>> tar'
>> AM_CFLAGS='-pipe'
>> AM_CXXFLAGS='-pipe'
>> AR='ar'
>> AUTOCONF='${SHELL} /Users/wesleysmith/Downloads/ilmbase-1.0.2/missing
>> --run autoconf'
>> AUTOHEADER='${SHELL}
>> /Users/wesleysmith/Downloads/ilmbase-1.0.2/missing --run autoheader'
>> AUTOMAKE='${SHELL} /Users/wesleysmith/Downloads/ilmbase-1.0.2/missing
>> --run automake-1.9'
>> AWK='awk'
>> CC='gcc'
>> CCDEPMODE='depmode=gcc3'
>> CFLAGS='-g -O2 -D_THREAD_SAFE '
>> CPP='gcc -E'
>> CPPFLAGS=''
>> CXX='g++'
>> CXXCPP='g++ -E'
>> CXXDEPMODE='depmode=gcc3'
>> CXXFLAGS='-g -O2 -D_THREAD_SAFE -Wno-long-double'
>> CYGPATH_W='echo'
>> DEFS='-DHAVE_CONFIG_H'
>> DEPDIR='.deps'
>> ECHO='/bin/echo'
>> ECHO_C='ECHO_N=''
>> ECHO_T=''
>> EGREP='grep -E'
>> EXEEXT=''
>> F77=''
>> FFLAGS=''
>> ILMBASE_VERSION='1.0.2'
>> INSTALL_DATA='${INSTALL} -m 644'
>> INSTALL_PROGRAM='${INSTALL}'
>> INSTALL_SCRIPT='${INSTALL}'
>> INSTALL_STRIP_PROGRAM='${SHELL} $(install_sh) -c -s'
>> LDFLAGS=''
>> LIBOBJS=''
>> LIBS=' '
>> LIBTOOL='$(SHELL) $(top_builddir)/libtool'
>> LIBTOOL_VERSION='6:0:0'
>> LN_S='ln -s'
>> LTLIBOBJS=''
>> MAINT='#'
>> MAINTAINER_MODE_FALSE=''
>> MAINTAINER_MODE_TRUE='#'
>> MAKEINFO='${SHELL} /Users/wesleysmith/Downloads/ilmbase-1.0.2/missing
>> --run makeinfo'
>> OBJEXT='o'
>> PACKAGE='ilmbase'
>> PACKAGE_BUGREPORT=''
>> PACKAGE_NAME='IlmBase'
>> PACKAGE_STRING='IlmBase 1.0.2'
>> PACKAGE_TARNAME='ilmbase'
>> PACKAGE_VERSION='1.0.2'
>> PATH_SEPARATOR=':'
>> PTHREAD_CC='gcc'
>> PTHREAD_CFLAGS='-D_THREAD_SAFE '
>> PTHREAD_LIBS=''
>> RANLIB='ranlib'
>> SED='/usr/bin/sed'
>> SET_MAKE=''
>> SHELL='/bin/sh'
>> STRIP='strip'
>> VERSION='1.0.2'
>> ac_ct_AR='ar'
>> ac_ct_CC='gcc'
>> ac_ct_CXX='g++'
>> ac_ct_F77=''
>> ac_ct_RANLIB='ranlib'
>> ac_ct_STRIP='strip'
>> acx_pthread_config=''
>> am__fastdepCC_FALSE='#'
>> am__fastdepCC_TRUE=''
>> am__fastdepCXX_FALSE='#'
>> am__fastdepCXX_TRUE=''
>> am__include='include'
>> am__leading_dot='.'
>> am__quote=''
>> am__tar='${AMTAR} chof - "$$tardir"'
>> am__untar='${AMTAR} xf -'
>> bindir='${exec_prefix}/bin'
>> build='i686-apple-darwin10.4.0'
>> build_alias=''
>> build_cpu='i686'
>> build_os='darwin10.4.0'
>> build_vendor='apple'
>> datadir='${prefix}/share'
>> exec_prefix='${prefix}'
>> host='i686-apple-darwin10.4.0'
>> host_alias=''
>> host_cpu='i686'
>> host_os='darwin10.4.0'
>> host_vendor='apple'
>> includedir='${prefix}/include'
>> infodir='${prefix}/info'
>> install_sh='/Users/wesleysmith/Downloads/ilmbase-1.0.2/install-sh'
>> libdir='${exec_prefix}/lib'
>> libexecdir='${exec_prefix}/libexec'
>> localstatedir='${prefix}/var'
>> mandir='${prefix}/man'
>> mkdir_p='$(install_sh) -d'
>> oldincludedir='/usr/include'
>> prefix='/usr/local'
>> program_transform_name='s,x,x,'
>> sbindir='${exec_prefix}/sbin'
>> sharedstatedir='${prefix}/com'
>> sysconfdir='${prefix}/etc'
>> target_alias=''
>>
>> ## ----------- ##
>> ## confdefs.h. ##
>> ## ----------- ##
>>
>> #define HAVE_COMPLETE_IOMANIP 1
>> #define HAVE_DLFCN_H 1
>> #define HAVE_INTTYPES_H 1
>> #define HAVE_LIMITS_H 1
>> #define HAVE_MEMORY_H 1
>> #define HAVE_PTHREAD 1
>> #define HAVE_SEMAPHORE_H 1
>> #define HAVE_STDINT_H 1
>> #define HAVE_STDLIB_H 1
>> #define HAVE_STRERROR 1
>> #define HAVE_STRINGS_H 1
>> #define HAVE_STRING_H 1
>> #define HAVE_SYS_STAT_H 1
>> #define HAVE_SYS_TYPES_H 1
>> #define HAVE_UNISTD_H 1
>> #define HAVE_UNISTD_H 1
>> #define PACKAGE "ilmbase"
>> #define PACKAGE_BUGREPORT ""
>> #define PACKAGE_NAME "IlmBase"
>> #define PACKAGE_STRING "IlmBase 1.0.2"
>> #define PACKAGE_TARNAME "ilmbase"
>> #define PACKAGE_VERSION "1.0.2"
>> #define STDC_HEADERS 1
>> #define STDC_HEADERS 1
>> #define VERSION "1.0.2"
>> #endif
>> #ifdef __cplusplus
>> extern "C" void exit (int);
>>
>> configure: exit 0
>>
>> _______________________________________________
>> Openexr-devel mailing list
>> address@hidden
>> http://lists.nongnu.org/mailman/listinfo/openexr-devel
>
>