Hi,
I just tried to build ilmbase on OSX. Make fails immediately with the
following message. Below is the config.log
Making all in Half
if g++ -DHAVE_CONFIG_H -I. -I. -I../config -I../config -pipe -g -O2
-D_THREAD_SAFE -Wno-long-double -MT eLut.o -MD -MP -MF
".deps/eLut.Tpo" -c -o eLut.o eLut.cpp; \
then mv -f ".deps/eLut.Tpo" ".deps/eLut.Po"; else rm -f
".deps/eLut.Tpo"; exit 1; fi
cc1plus: error: unrecognized command line option "-Wno-long-double"
make[1]: *** [eLut.o] Error 1
make: *** [all-recursive] Error 1
--------------------------------------
config.log
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by IlmBase configure 1.0.2, which was
generated by GNU Autoconf 2.59. Invocation command line was
$ ./configure
## --------- ##
## Platform. ##
## --------- ##
hostname = bleeps.local
uname -m = i386
uname -r = 10.4.0
uname -s = Darwin
uname -v = Darwin Kernel Version 10.4.0: Fri Apr 23 18:28:53 PDT 2010;
root:xnu-1504.7.4~1/RELEASE_I386
/usr/bin/uname -p = i386
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
hostinfo = Mach kernel version:
Darwin Kernel Version 10.4.0: Fri Apr 23 18:28:53 PDT 2010;
root:xnu-1504.7.4~1/RELEASE_I386
Kernel configured for up to 4 processors.
2 processors are physically available.
4 processors are logically available.
Processor type: i486 (Intel 80486)
Processors active: 0 1 2 3
Primary memory available: 4.00 gigabytes
Default processor set: 132 tasks, 612 threads, 4 processors
Load average: 1.25, Mach factor: 2.74
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /opt/local/bin
PATH: /opt/local/sbin
PATH: /usr/bin
PATH: /bin
PATH: /usr/sbin
PATH: /sbin
PATH: /usr/local/bin
PATH: /usr/X11/bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:1554: checking build system type
configure:1572: result: i686-apple-darwin10.4.0
configure:1580: checking host system type
configure:1594: result: i686-apple-darwin10.4.0
configure:1619: checking for a BSD-compatible install
configure:1674: result: /usr/bin/install -c
configure:1685: checking whether build environment is sane
configure:1728: result: yes
configure:1793: checking for gawk
configure:1822: result: no
configure:1793: checking for mawk
configure:1822: result: no
configure:1793: checking for nawk
configure:1822: result: no
configure:1793: checking for awk
configure:1809: found /usr/bin/awk
configure:1819: result: awk
configure:1829: checking whether make sets $(MAKE)
configure:1849: result: yes
configure:2016: checking whether to enable maintainer-specific
portions of Makefiles
configure:2025: result: no
configure:2100: checking for g++
configure:2116: found /usr/bin/g++
configure:2126: result: g++
configure:2142: checking for C++ compiler version
configure:2145: g++ --version</dev/null>&5
i686-apple-darwin10-g++-4.2.1 (GCC) 4.2.1 (Apple Inc. build 5659)
Copyright (C) 2007 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:2148: $? = 0
configure:2150: g++ -v</dev/null>&5
Using built-in specs.
Target: i686-apple-darwin10
Configured with: /var/tmp/gcc/gcc-5659~1/src/configure
--disable-checking --enable-werror --prefix=/usr --mandir=/share/man
--enable-languages=c,objc,c++,obj-c++
--program-transform-name=/^[cg][^.-]*$/s/$/-4.2/
--with-slibdir=/usr/lib --build=i686-apple-darwin10
--program-prefix=i686-apple-darwin10- --host=x86_64-apple-darwin10
--target=i686-apple-darwin10 --with-gxx-include-dir=/include/c++/4.2.1
Thread model: posix
gcc version 4.2.1 (Apple Inc. build 5659)
configure:2153: $? = 0
configure:2155: g++ -V</dev/null>&5
g++-4.2: argument to `-V' is missing
configure:2158: $? = 1
configure:2181: checking for C++ compiler default output file name
configure:2184: g++ conftest.cc>&5
configure:2187: $? = 0
configure:2233: result: a.out
configure:2238: checking whether the C++ compiler works
configure:2244: ./a.out
configure:2247: $? = 0
configure:2264: result: yes
configure:2271: checking whether we are cross compiling
configure:2273: result: no
configure:2276: checking for suffix of executables
configure:2278: g++ -o conftest conftest.cc>&5
configure:2281: $? = 0
configure:2306: result:
configure:2312: checking for suffix of object files
configure:2333: g++ -c conftest.cc>&5
configure:2336: $? = 0
configure:2358: result: o
configure:2362: checking whether we are using the GNU C++ compiler
configure:2386: g++ -c conftest.cc>&5
configure:2392: $? = 0
configure:2396: test -z
|| test ! -s conftest.err
configure:2399: $? = 0
configure:2402: test -s conftest.o
configure:2405: $? = 0
configure:2418: result: yes
configure:2424: checking whether g++ accepts -g
configure:2445: g++ -c -g conftest.cc>&5
configure:2451: $? = 0
configure:2455: test -z
|| test ! -s conftest.err
configure:2458: $? = 0
configure:2461: test -s conftest.o
configure:2464: $? = 0
configure:2475: result: yes
configure:2517: g++ -c -g -O2 conftest.cc>&5
configure:2523: $? = 0
configure:2527: test -z
|| test ! -s conftest.err
configure:2530: $? = 0
configure:2533: test -s conftest.o
configure:2536: $? = 0
configure:2562: g++ -c -g -O2 conftest.cc>&5
conftest.cc: In function 'int main()':
conftest.cc:15: error: 'exit' was not declared in this scope
configure:2568: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME "IlmBase"
| #define PACKAGE_TARNAME "ilmbase"
| #define PACKAGE_VERSION "1.0.2"
| #define PACKAGE_STRING "IlmBase 1.0.2"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "ilmbase"
| #define VERSION "1.0.2"
| /* end confdefs.h. */
|
| int
| main ()
| {
| exit (42);
| ;
| return 0;
| }
configure:2517: g++ -c -g -O2 conftest.cc>&5
conftest.cc:11: error: 'void std::exit(int)' should have been declared
inside 'std'
In file included from conftest.cc:12:
/usr/include/stdlib.h:159: error: declaration of 'void std::exit(int)'
throws different exceptions
conftest.cc:11: error: from previous declaration 'void std::exit(int) throw ()'
configure:2523: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME "IlmBase"
| #define PACKAGE_TARNAME "ilmbase"
| #define PACKAGE_VERSION "1.0.2"
| #define PACKAGE_STRING "IlmBase 1.0.2"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "ilmbase"
| #define VERSION "1.0.2"
| /* end confdefs.h. */
| extern "C" void std::exit (int) throw (); using std::exit;
| #include<stdlib.h>
| int
| main ()
| {
| exit (42);
| ;
| return 0;
| }
configure:2517: g++ -c -g -O2 conftest.cc>&5
conftest.cc:11: error: 'void std::exit(int)' should have been declared
inside 'std'
configure:2523: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME "IlmBase"
| #define PACKAGE_TARNAME "ilmbase"
| #define PACKAGE_VERSION "1.0.2"
| #define PACKAGE_STRING "IlmBase 1.0.2"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "ilmbase"
| #define VERSION "1.0.2"
| /* end confdefs.h. */
| extern "C" void std::exit (int); using std::exit;
| #include<stdlib.h>
| int
| main ()
| {
| exit (42);
| ;
| return 0;
| }
configure:2517: g++ -c -g -O2 conftest.cc>&5
In file included from conftest.cc:12:
/usr/include/stdlib.h:159: error: declaration of 'void exit(int)'
throws different exceptions
conftest.cc:11: error: from previous declaration 'void exit(int) throw ()'
configure:2523: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME "IlmBase"
| #define PACKAGE_TARNAME "ilmbase"
| #define PACKAGE_VERSION "1.0.2"
| #define PACKAGE_STRING "IlmBase 1.0.2"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "ilmbase"
| #define VERSION "1.0.2"
| /* end confdefs.h. */
| extern "C" void exit (int) throw ();
| #include<stdlib.h>
| int
| main ()
| {
| exit (42);
| ;
| return 0;
| }
configure:2517: g++ -c -g -O2 conftest.cc>&5
configure:2523: $? = 0
configure:2527: test -z
|| test ! -s conftest.err
configure:2530: $? = 0
configure:2533: test -s conftest.o
configure:2536: $? = 0
configure:2562: g++ -c -g -O2 conftest.cc>&5
configure:2568: $? = 0
configure:2572: test -z
|| test ! -s conftest.err
configure:2575: $? = 0
configure:2578: test -s conftest.o
configure:2581: $? = 0
configure:2615: checking for style of include used by make
configure:2643: result: GNU
configure:2671: checking dependency style of g++
configure:2761: result: gcc3
configure:2791: checking for a BSD-compatible install
configure:2846: result: /usr/bin/install -c
configure:2903: checking for gcc
configure:2919: found /usr/bin/gcc
configure:2929: result: gcc
configure:3173: checking for C compiler version
configure:3176: gcc --version</dev/null>&5
i686-apple-darwin10-gcc-4.2.1 (GCC) 4.2.1 (Apple Inc. build 5659)
Copyright (C) 2007 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3179: $? = 0
configure:3181: gcc -v</dev/null>&5
Using built-in specs.
Target: i686-apple-darwin10
Configured with: /var/tmp/gcc/gcc-5659~1/src/configure
--disable-checking --enable-werror --prefix=/usr --mandir=/share/man
--enable-languages=c,objc,c++,obj-c++
--program-transform-name=/^[cg][^.-]*$/s/$/-4.2/
--with-slibdir=/usr/lib --build=i686-apple-darwin10
--program-prefix=i686-apple-darwin10- --host=x86_64-apple-darwin10
--target=i686-apple-darwin10 --with-gxx-include-dir=/include/c++/4.2.1
Thread model: posix
gcc version 4.2.1 (Apple Inc. build 5659)
configure:3184: $? = 0
configure:3186: gcc -V</dev/null>&5
gcc-4.2: argument to `-V' is missing
configure:3189: $? = 1
configure:3192: checking whether we are using the GNU C compiler
configure:3216: gcc -c conftest.c>&5
configure:3222: $? = 0
configure:3226: test -z
|| test ! -s conftest.err
configure:3229: $? = 0
configure:3232: test -s conftest.o
configure:3235: $? = 0
configure:3248: result: yes
configure:3254: checking whether gcc accepts -g
configure:3275: gcc -c -g conftest.c>&5
configure:3281: $? = 0
configure:3285: test -z
|| test ! -s conftest.err
configure:3288: $? = 0
configure:3291: test -s conftest.o
configure:3294: $? = 0
configure:3305: result: yes
configure:3322: checking for gcc option to accept ANSI C
configure:3392: gcc -c -g -O2 conftest.c>&5
configure:3398: $? = 0
configure:3402: test -z
|| test ! -s conftest.err
configure:3405: $? = 0
configure:3408: test -s conftest.o
configure:3411: $? = 0
configure:3429: result: none needed
configure:3447: gcc -c -g -O2 conftest.c>&5
conftest.c:2: error: expected '=', ',', ';', 'asm' or '__attribute__'
before 'me'
configure:3453: $? = 1
configure: failed program was:
| #ifndef __cplusplus
| choke me
| #endif
configure:3588: checking dependency style of gcc
configure:3678: result: gcc3
configure:3695: checking whether ln -s works
configure:3699: result: yes
configure:3778: checking for a sed that does not truncate output
configure:3834: result: /usr/bin/sed
configure:3837: checking for egrep
configure:3847: result: grep -E
configure:3863: checking for ld used by gcc
configure:3930: result: /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld
configure:3939: checking if the linker
(/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) is GNU ld
configure:3954: result: no
configure:3959: checking for
/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld option to reload object
files
configure:3966: result: -r
configure:3984: checking for BSD-compatible nm
configure:4033: result: /usr/bin/nm
configure:4037: checking how to recognise dependent libraries
configure:4213: result: pass_all
configure:4450: checking how to run the C preprocessor
configure:4485: gcc -E conftest.c
configure:4491: $? = 0
configure:4523: gcc -E conftest.c
conftest.c:14:28: error: ac_nonexistent.h: No such file or directory
configure:4529: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME "IlmBase"
| #define PACKAGE_TARNAME "ilmbase"
| #define PACKAGE_VERSION "1.0.2"
| #define PACKAGE_STRING "IlmBase 1.0.2"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "ilmbase"
| #define VERSION "1.0.2"
| #ifdef __cplusplus
| extern "C" void exit (int);
| #endif
| /* end confdefs.h. */
| #include<ac_nonexistent.h>
configure:4568: result: gcc -E
configure:4592: gcc -E conftest.c
configure:4598: $? = 0
configure:4630: gcc -E conftest.c
conftest.c:14:28: error: ac_nonexistent.h: No such file or directory
configure:4636: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME "IlmBase"
| #define PACKAGE_TARNAME "ilmbase"
| #define PACKAGE_VERSION "1.0.2"
| #define PACKAGE_STRING "IlmBase 1.0.2"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "ilmbase"
| #define VERSION "1.0.2"
| #ifdef __cplusplus
| extern "C" void exit (int);
| #endif
| /* end confdefs.h. */
| #include<ac_nonexistent.h>
configure:4680: checking for ANSI C header files
configure:4705: gcc -c -g -O2 conftest.c>&5
configure:4711: $? = 0
configure:4715: test -z
|| test ! -s conftest.err
configure:4718: $? = 0
configure:4721: test -s conftest.o
configure:4724: $? = 0
configure:4813: gcc -o conftest -g -O2 conftest.c>&5
conftest.c: In function 'main':
conftest.c:31: warning: incompatible implicit declaration of built-in
function 'exit'
configure:4816: $? = 0
configure:4818: ./conftest
configure:4821: $? = 0
configure:4836: result: yes
configure:4860: checking for sys/types.h
configure:4876: gcc -c -g -O2 conftest.c>&5
configure:4882: $? = 0
configure:4886: test -z
|| test ! -s conftest.err
configure:4889: $? = 0
configure:4892: test -s conftest.o
configure:4895: $? = 0
configure:4906: result: yes
configure:4860: checking for sys/stat.h
configure:4876: gcc -c -g -O2 conftest.c>&5
configure:4882: $? = 0
configure:4886: test -z
|| test ! -s conftest.err
configure:4889: $? = 0
configure:4892: test -s conftest.o
configure:4895: $? = 0
configure:4906: result: yes
configure:4860: checking for stdlib.h
configure:4876: gcc -c -g -O2 conftest.c>&5
configure:4882: $? = 0
configure:4886: test -z
|| test ! -s conftest.err
configure:4889: $? = 0
configure:4892: test -s conftest.o
configure:4895: $? = 0
configure:4906: result: yes
configure:4860: checking for string.h
configure:4876: gcc -c -g -O2 conftest.c>&5
configure:4882: $? = 0
configure:4886: test -z
|| test ! -s conftest.err
configure:4889: $? = 0
configure:4892: test -s conftest.o
configure:4895: $? = 0
configure:4906: result: yes
configure:4860: checking for memory.h
configure:4876: gcc -c -g -O2 conftest.c>&5
configure:4882: $? = 0
configure:4886: test -z
|| test ! -s conftest.err
configure:4889: $? = 0
configure:4892: test -s conftest.o
configure:4895: $? = 0
configure:4906: result: yes
configure:4860: checking for strings.h
configure:4876: gcc -c -g -O2 conftest.c>&5
configure:4882: $? = 0
configure:4886: test -z
|| test ! -s conftest.err
configure:4889: $? = 0
configure:4892: test -s conftest.o
configure:4895: $? = 0
configure:4906: result: yes
configure:4860: checking for inttypes.h
configure:4876: gcc -c -g -O2 conftest.c>&5
configure:4882: $? = 0
configure:4886: test -z
|| test ! -s conftest.err
configure:4889: $? = 0
configure:4892: test -s conftest.o
configure:4895: $? = 0
configure:4906: result: yes
configure:4860: checking for stdint.h
configure:4876: gcc -c -g -O2 conftest.c>&5
configure:4882: $? = 0
configure:4886: test -z
|| test ! -s conftest.err
configure:4889: $? = 0
configure:4892: test -s conftest.o
configure:4895: $? = 0
configure:4906: result: yes
configure:4860: checking for unistd.h
configure:4876: gcc -c -g -O2 conftest.c>&5
configure:4882: $? = 0
configure:4886: test -z
|| test ! -s conftest.err
configure:4889: $? = 0
configure:4892: test -s conftest.o
configure:4895: $? = 0
configure:4906: result: yes
configure:4932: checking dlfcn.h usability
configure:4944: gcc -c -g -O2 conftest.c>&5
configure:4950: $? = 0
configure:4954: test -z
|| test ! -s conftest.err
configure:4957: $? = 0
configure:4960: test -s conftest.o
configure:4963: $? = 0
configure:4973: result: yes
configure:4977: checking dlfcn.h presence
configure:4987: gcc -E conftest.c
configure:4993: $? = 0
configure:5013: result: yes
configure:5048: checking for dlfcn.h
configure:5055: result: yes
configure:5078: checking how to run the C++ preprocessor
configure:5109: g++ -E conftest.cc
configure:5115: $? = 0
configure:5147: g++ -E conftest.cc
conftest.cc:25:28: error: ac_nonexistent.h: No such file or directory
configure:5153: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME "IlmBase"
| #define PACKAGE_TARNAME "ilmbase"
| #define PACKAGE_VERSION "1.0.2"
| #define PACKAGE_STRING "IlmBase 1.0.2"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "ilmbase"
| #define VERSION "1.0.2"
| #ifdef __cplusplus
| extern "C" void exit (int);
| #endif
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| /* end confdefs.h. */
| #include<ac_nonexistent.h>
configure:5192: result: g++ -E
configure:5216: g++ -E conftest.cc
configure:5222: $? = 0
configure:5254: g++ -E conftest.cc
conftest.cc:25:28: error: ac_nonexistent.h: No such file or directory
configure:5260: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME "IlmBase"
| #define PACKAGE_TARNAME "ilmbase"
| #define PACKAGE_VERSION "1.0.2"
| #define PACKAGE_STRING "IlmBase 1.0.2"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "ilmbase"
| #define VERSION "1.0.2"
| #ifdef __cplusplus
| extern "C" void exit (int);
| #endif
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| /* end confdefs.h. */
| #include<ac_nonexistent.h>
configure:5357: checking for g77
configure:5386: result: no
configure:5357: checking for f77
configure:5386: result: no
configure:5357: checking for xlf
configure:5386: result: no
configure:5357: checking for frt
configure:5386: result: no
configure:5357: checking for pgf77
configure:5386: result: no
configure:5357: checking for fort77
configure:5386: result: no
configure:5357: checking for fl32
configure:5386: result: no
configure:5357: checking for af77
configure:5386: result: no
configure:5357: checking for f90
configure:5386: result: no
configure:5357: checking for xlf90
configure:5386: result: no
configure:5357: checking for pgf90
configure:5386: result: no
configure:5357: checking for epcf90
configure:5386: result: no
configure:5357: checking for f95
configure:5386: result: no
configure:5357: checking for fort
configure:5386: result: no
configure:5357: checking for xlf95
configure:5386: result: no
configure:5357: checking for ifc
configure:5386: result: no
configure:5357: checking for efc
configure:5386: result: no
configure:5357: checking for pgf95
configure:5386: result: no
configure:5357: checking for lf95
configure:5386: result: no
configure:5357: checking for gfortran
configure:5386: result: no
configure:5398: checking for Fortran 77 compiler version
configure:5401: --version</dev/null>&5
./configure: line 5402: --version: command not found
configure:5404: $? = 127
configure:5406: -v</dev/null>&5
./configure: line 5407: -v: command not found
configure:5409: $? = 127
configure:5411: -V</dev/null>&5
./configure: line 5412: -V: command not found
configure:5414: $? = 127
configure:5422: checking whether we are using the GNU Fortran 77 compiler
configure:5436: -c conftest.F>&5
./configure: line 5437: -c: command not found
configure:5442: $? = 127
configure: failed program was:
| program main
| #ifndef __GNUC__
| choke me
| #endif
|
| end
configure:5468: result: no
configure:5474: checking whether accepts -g
configure:5486: -c -g conftest.f>&5
./configure: line 5487: -c: command not found
configure:5492: $? = 127
configure: failed program was:
| program main
|
| end
configure:5517: result: no
configure:5547: checking the maximum length of command line arguments
configure:5656: result: 196608
configure:5667: checking command to parse /usr/bin/nm output from gcc object
configure:5772: gcc -c -g -O2 conftest.c>&5
configure:5775: $? = 0
configure:5779: /usr/bin/nm conftest.o \| sed -n -e 's/^.*[
]\([BCDEGRST][BCDEGRST]*\)[ ][
]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2
\2/p' \> conftest.nm
configure:5782: $? = 0
cannot find nm_test_var in conftest.nm
configure:5772: gcc -c -g -O2 conftest.c>&5
configure:5775: $? = 0
configure:5779: /usr/bin/nm conftest.o \| sed -n -e 's/^.*[
]\([BCDEGRST][BCDEGRST]*\)[ ][
]*_\([_A-Za-z][_A-Za-z0-9]*\)$/\1
_\2 \2/p' \> conftest.nm
configure:5782: $? = 0
configure:5834: gcc -o conftest -g -O2 conftest.c conftstm.o>&5
configure:5837: $? = 0
configure:5875: result: ok
configure:5879: checking for objdir
configure:5894: result: .libs
configure:5984: checking for ar
configure:6000: found /usr/bin/ar
configure:6011: result: ar
configure:6064: checking for ranlib
configure:6080: found /usr/bin/ranlib
configure:6091: result: ranlib
configure:6144: checking for strip
configure:6160: found /usr/bin/strip
configure:6171: result: strip
configure:6443: checking if gcc supports -fno-rtti -fno-exceptions
configure:6461: gcc -c -g -O2 -fno-rtti -fno-exceptions conftest.c>&5
cc1: warning: command line option "-fno-rtti" is valid for C++/ObjC++
but not for C
configure:6465: $? = 0
configure:6478: result: no
configure:6493: checking for gcc option to produce PIC
configure:6703: result: -fno-common
configure:6711: checking if gcc PIC flag -fno-common works
configure:6729: gcc -c -g -O2 -fno-common -DPIC conftest.c>&5
configure:6733: $? = 0
configure:6746: result: yes
configure:6774: checking if gcc static flag -static works
configure:6802: result: no
configure:6812: checking if gcc supports -c -o file.o
configure:6833: gcc -c -g -O2 -o out/conftest2.o conftest.c>&5
configure:6837: $? = 0
configure:6859: result: yes
configure:6885: checking whether the gcc linker
(/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared
libraries
configure:7843: result: yes
configure:7910: checking dynamic linker characteristics
configure:8519: result: darwin10.4.0 dyld
configure:8528: checking how to hardcode library paths into programs
configure:8553: result: immediate
configure:8567: checking whether stripping libraries is possible
configure:8580: result: yes
configure:9406: checking if libtool supports shared libraries
configure:9408: result: yes
configure:9411: checking whether to build shared libraries
configure:9432: result: yes
configure:9435: checking whether to build static libraries
configure:9439: result: yes
configure:9531: creating libtool
configure:10122: checking for ld used by g++
configure:10189: result: /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld
configure:10198: checking if the linker
(/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) is GNU ld
configure:10213: result: no
configure:10264: checking whether the g++ linker
(/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared
libraries
configure:11202: result: yes
configure:11220: g++ -c -g -O2 conftest.cpp>&5
configure:11223: $? = 0
configure:11342: checking for g++ option to produce PIC
configure:11616: result: -fno-common
configure:11624: checking if g++ PIC flag -fno-common works
configure:11642: g++ -c -g -O2 -fno-common -DPIC conftest.cpp>&5
configure:11646: $? = 0
configure:11659: result: yes
configure:11687: checking if g++ static flag -static works
configure:11715: result: no
configure:11725: checking if g++ supports -c -o file.o
configure:11746: g++ -c -g -O2 -o out/conftest2.o conftest.cpp>&5
configure:11750: $? = 0
configure:11772: result: yes
configure:11798: checking whether the g++ linker
(/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared
libraries
configure:11823: result: yes
configure:11890: checking dynamic linker characteristics
configure:12499: result: darwin10.4.0 dyld
configure:12508: checking how to hardcode library paths into programs
configure:12533: result: immediate
configure:18737: checking whether make sets $(MAKE)
configure:18757: result: yes
configure:18977: checking for the pthreads library -lpthreads
configure:19015: gcc -o conftest -g -O2 conftest.c -lpthreads>&5
ld: library not found for -lpthreads
collect2: ld returned 1 exit status
configure:19021: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME "IlmBase"
| #define PACKAGE_TARNAME "ilmbase"
| #define PACKAGE_VERSION "1.0.2"
| #define PACKAGE_STRING "IlmBase 1.0.2"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "ilmbase"
| #define VERSION "1.0.2"
| #ifdef __cplusplus
| extern "C" void exit (int);
| #endif
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| /* end confdefs.h. */
| #include<pthread.h>
| int
| main ()
| {
| pthread_t th; pthread_join(th, 0);
| pthread_attr_init(0); pthread_cleanup_push(0, 0);
| pthread_create(0,0,0,0); pthread_cleanup_pop(0);
| ;
| return 0;
| }
configure:19048: result: no
configure:18923: checking whether pthreads work without any flags
configure:19015: gcc -o conftest -g -O2 conftest.c>&5
configure:19021: $? = 0
configure:19025: test -z
|| test ! -s conftest.err
configure:19028: $? = 0
configure:19031: test -s conftest
configure:19034: $? = 0
configure:19048: result: yes
configure:19067: checking for joinable pthread attribute
configure:19087: gcc -o conftest -g -O2 conftest.c>&5
configure:19093: $? = 0
configure:19097: test -z
|| test ! -s conftest.err
configure:19100: $? = 0
configure:19103: test -s conftest
configure:19106: $? = 0
configure:19117: result: PTHREAD_CREATE_JOINABLE
configure:19127: checking if more special flags are required for pthreads
configure:19134: result: -D_THREAD_SAFE
configure:19146: checking for cc_r
configure:19173: result: gcc
configure:19223: checking semaphore.h usability
configure:19235: gcc -c -g -O2 -D_THREAD_SAFE conftest.c>&5
configure:19241: $? = 0
configure:19245: test -z
|| test ! -s conftest.err
configure:19248: $? = 0
configure:19251: test -s conftest.o
configure:19254: $? = 0
configure:19264: result: yes
configure:19268: checking semaphore.h presence
configure:19278: gcc -E conftest.c
configure:19284: $? = 0
configure:19304: result: yes
configure:19339: checking for semaphore.h
configure:19346: result: yes
configure:19355: checking for library containing sem_init
configure:19385: gcc -o conftest -g -O2 -D_THREAD_SAFE conftest.c>&5
configure:19391: $? = 0
configure:19395: test -z
|| test ! -s conftest.err
configure:19398: $? = 0
configure:19401: test -s conftest
configure:19404: $? = 0
configure:19474: result: none required
configure:19479: checking whether to use POSIX unnamed semaphores
configure:19516: gcc -o conftest -g -O2 -D_THREAD_SAFE conftest.c>&5
configure:19519: $? = 0
configure:19521: ./conftest
configure:19524: $? = 1
configure: program exited with status 1
configure: failed program was:
|
| /* confdefs.h. */
|
| #define PACKAGE_NAME "IlmBase"
| #define PACKAGE_TARNAME "ilmbase"
| #define PACKAGE_VERSION "1.0.2"
| #define PACKAGE_STRING "IlmBase 1.0.2"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "ilmbase"
| #define VERSION "1.0.2"
| #ifdef __cplusplus
| extern "C" void exit (int);
| #endif
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define HAVE_PTHREAD 1
| #define HAVE_SEMAPHORE_H 1
| /* end confdefs.h. */
| #include<semaphore.h>
| int
| main ()
| {
|
| sem_t mysem;
| if (sem_init (&mysem, 1, 1) == 0)
| {
| if (sem_wait (&mysem) == 0)
| {
| sem_post (&mysem);
| sem_destroy (&mysem);
| return 0;
| }
| }
| return 1;
|
| ;
| return 0;
| }
|
configure:19537: result: no (pshared not usable)
configure:19580: multithread true, LIBS = , CC = gcc, CXXFLAGS = -g
-O2 -D_THREAD_SAFE
configure:19584: checking for ANSI C header files
configure:19740: result: yes
configure:19765: checking limits.h usability
configure:19777: gcc -c -g -O2 -D_THREAD_SAFE conftest.c>&5
configure:19783: $? = 0
configure:19787: test -z
|| test ! -s conftest.err
configure:19790: $? = 0
configure:19793: test -s conftest.o
configure:19796: $? = 0
configure:19806: result: yes
configure:19810: checking limits.h presence
configure:19820: gcc -E conftest.c
configure:19826: $? = 0
configure:19846: result: yes
configure:19881: checking for limits.h
configure:19888: result: yes
configure:19756: checking for unistd.h
configure:19761: result: yes
configure:19902: checking for an ANSI C-conforming const
configure:19969: gcc -c -g -O2 -D_THREAD_SAFE conftest.c>&5
configure:19975: $? = 0
configure:19979: test -z
|| test ! -s conftest.err
configure:19982: $? = 0
configure:19985: test -s conftest.o
configure:19988: $? = 0
configure:19999: result: yes
configure:20009: checking for inline
configure:20030: gcc -c -g -O2 -D_THREAD_SAFE conftest.c>&5
configure:20036: $? = 0
configure:20040: test -z
|| test ! -s conftest.err
configure:20043: $? = 0
configure:20046: test -s conftest.o
configure:20049: $? = 0
configure:20061: result: inline
configure:20080: checking for size_t
configure:20104: gcc -c -g -O2 -D_THREAD_SAFE conftest.c>&5
configure:20110: $? = 0
configure:20114: test -z
|| test ! -s conftest.err
configure:20117: $? = 0
configure:20120: test -s conftest.o
configure:20123: $? = 0
configure:20134: result: yes
configure:20151: checking for strerror
configure:20208: gcc -o conftest -g -O2 -D_THREAD_SAFE conftest.c>&5
configure:20214: $? = 0
configure:20218: test -z
|| test ! -s conftest.err
configure:20221: $? = 0
configure:20224: test -s conftest
configure:20227: $? = 0
configure:20239: result: yes
configure:20251: checking for complete iomanip support in C++ standard library
configure:20281: g++ -c -g -O2 -D_THREAD_SAFE conftest.cc>&5
configure:20287: $? = 0
configure:20291: test -z
|| test ! -s conftest.err
configure:20294: $? = 0
configure:20297: test -s conftest.o
configure:20300: $? = 0
configure:20312: result: yes
configure:20322: checking for gcc optimization flags
configure:20342: gcc -c -g -O2 -D_THREAD_SAFE -pipe conftest.c>&5
configure:20348: $? = 0
configure:20352: test -z
|| test ! -s conftest.err
configure:20355: $? = 0
configure:20358: test -s conftest.o
configure:20361: $? = 0
configure:20372: result: -pipe
configure:20575: creating ./config.status
## ---------------------- ##
## Running config.status. ##
## ---------------------- ##
This file was extended by IlmBase config.status 1.0.2, which was
generated by GNU Autoconf 2.59. Invocation command line was
CONFIG_FILES =
CONFIG_HEADERS =
CONFIG_LINKS =
CONFIG_COMMANDS =
$ ./config.status
on bleeps.local
config.status:736: creating Makefile
config.status:736: creating IlmBase.pc
config.status:736: creating config/Makefile
config.status:736: creating Half/Makefile
config.status:736: creating HalfTest/Makefile
config.status:736: creating Iex/Makefile
config.status:736: creating IexTest/Makefile
config.status:736: creating IlmThread/Makefile
config.status:736: creating Imath/Makefile
config.status:736: creating ImathTest/Makefile
config.status:736: creating vc/Makefile
config.status:840: creating config/IlmBaseConfig.h
config.status:1142: executing depfiles commands
configure:21917: result:
---------------------------------------------
Summary for IlmBase features:
OS X architectures default
OS X SDK default
OS X two-way universal build (deprecated) no
---------------------------------------------
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_build=i686-apple-darwin10.4.0
ac_cv_build_alias=i686-apple-darwin10.4.0
ac_cv_c_compiler_gnu=yes
ac_cv_c_const=yes
ac_cv_c_inline=inline
ac_cv_cxx_compiler_gnu=yes
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=
ac_cv_env_CFLAGS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_CXXCPP_set=
ac_cv_env_CXXCPP_value=
ac_cv_env_CXXFLAGS_set=
ac_cv_env_CXXFLAGS_value=
ac_cv_env_CXX_set=
ac_cv_env_CXX_value=
ac_cv_env_F77_set=
ac_cv_env_F77_value=
ac_cv_env_FFLAGS_set=
ac_cv_env_FFLAGS_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_exeext=
ac_cv_f77_compiler_gnu=no
ac_cv_func_strerror=yes
ac_cv_header_dlfcn_h=yes
ac_cv_header_inttypes_h=yes
ac_cv_header_limits_h=yes
ac_cv_header_memory_h=yes
ac_cv_header_semaphore_h=yes
ac_cv_header_stdc=yes
ac_cv_header_stdint_h=yes
ac_cv_header_stdlib_h=yes
ac_cv_header_string_h=yes
ac_cv_header_strings_h=yes
ac_cv_header_sys_stat_h=yes
ac_cv_header_sys_types_h=yes
ac_cv_header_unistd_h=yes
ac_cv_host=i686-apple-darwin10.4.0
ac_cv_host_alias=i686-apple-darwin10.4.0
ac_cv_objext=o
ac_cv_path_install='/usr/bin/install -c'
ac_cv_prog_AWK=awk
ac_cv_prog_CPP='gcc -E'
ac_cv_prog_CXXCPP='g++ -E'
ac_cv_prog_PTHREAD_CC=gcc
ac_cv_prog_ac_ct_AR=ar
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_ac_ct_CXX=g++
ac_cv_prog_ac_ct_RANLIB=ranlib
ac_cv_prog_ac_ct_STRIP=strip
ac_cv_prog_cc_g=yes
ac_cv_prog_cc_stdc=
ac_cv_prog_cxx_g=yes
ac_cv_prog_egrep='grep -E'
ac_cv_prog_f77_g=no
ac_cv_prog_make_make_set=yes
ac_cv_search_sem_init='none required'
ac_cv_type_size_t=yes
am_cv_CC_dependencies_compiler_type=gcc3
am_cv_CXX_dependencies_compiler_type=gcc3
lt_cv_deplibs_check_method=pass_all
lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
lt_cv_ld_reload_flag=-r
lt_cv_objdir=.libs
lt_cv_path_LD=/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld
lt_cv_path_LDCXX=/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld
lt_cv_path_NM=/usr/bin/nm
lt_cv_path_SED=/usr/bin/sed
lt_cv_prog_compiler_c_o=yes
lt_cv_prog_compiler_c_o_CXX=yes
lt_cv_prog_compiler_rtti_exceptions=no
lt_cv_prog_gnu_ld=no
lt_cv_prog_gnu_ldcxx=no
lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[
]\([BCDEGRST][BCDEGRST]*\)[ ][
]*_\([_A-Za-z][_A-Za-z0-9]*\)$/\1
_\2 \2/p'\'''
lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^
]*\) $/ {\"\1\", (lt_ptr) 0},/p'\'' -e '\''s/^[BCDEGRST] \([^ ]*\)
\([^ ]*\)$/ {"\2", (lt_ptr) \&\2},/p'\'''
lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^. .* \(.*\)$/extern
int \1;/p'\'''
lt_cv_sys_max_cmd_len=196608
lt_lt_cv_prog_compiler_c_o='"yes"'
lt_lt_cv_prog_compiler_c_o_CXX='"yes"'
lt_lt_cv_sys_global_symbol_pipe='"sed -n -e '\''s/^.*[
]\\([BCDEGRST][BCDEGRST]*\\)[ ][
]*_\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 _\\2 \\2/p'\''"'
lt_lt_cv_sys_global_symbol_to_c_name_address='"sed -n -e '\''s/^:
\\([^ ]*\\) \$/ {\\\"\\1\\\", (lt_ptr) 0},/p'\'' -e '\''s/^[BCDEGRST]
\\([^ ]*\\) \\([^ ]*\\)\$/ {\"\\2\", (lt_ptr) \\&\\2},/p'\''"'
lt_lt_cv_sys_global_symbol_to_cdecl='"sed -n -e '\''s/^. .*
\\(.*\\)\$/extern int \\1;/p'\''"'
## ----------------- ##
## Output variables. ##
## ----------------- ##
ACLOCAL='${SHELL} /Users/wesleysmith/Downloads/ilmbase-1.0.2/missing
--run aclocal-1.9'
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='${SHELL} /Users/wesleysmith/Downloads/ilmbase-1.0.2/missing --run tar'
AM_CFLAGS='-pipe'
AM_CXXFLAGS='-pipe'
AR='ar'
AUTOCONF='${SHELL} /Users/wesleysmith/Downloads/ilmbase-1.0.2/missing
--run autoconf'
AUTOHEADER='${SHELL}
/Users/wesleysmith/Downloads/ilmbase-1.0.2/missing --run autoheader'
AUTOMAKE='${SHELL} /Users/wesleysmith/Downloads/ilmbase-1.0.2/missing
--run automake-1.9'
AWK='awk'
CC='gcc'
CCDEPMODE='depmode=gcc3'
CFLAGS='-g -O2 -D_THREAD_SAFE '
CPP='gcc -E'
CPPFLAGS=''
CXX='g++'
CXXCPP='g++ -E'
CXXDEPMODE='depmode=gcc3'
CXXFLAGS='-g -O2 -D_THREAD_SAFE -Wno-long-double'
CYGPATH_W='echo'
DEFS='-DHAVE_CONFIG_H'
DEPDIR='.deps'
ECHO='/bin/echo'
ECHO_C='ECHO_N=''
ECHO_T=''
EGREP='grep -E'
EXEEXT=''
F77=''
FFLAGS=''
ILMBASE_VERSION='1.0.2'
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='${SHELL} $(install_sh) -c -s'
LDFLAGS=''
LIBOBJS=''
LIBS=' '
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
LIBTOOL_VERSION='6:0:0'
LN_S='ln -s'
LTLIBOBJS=''
MAINT='#'
MAINTAINER_MODE_FALSE=''
MAINTAINER_MODE_TRUE='#'
MAKEINFO='${SHELL} /Users/wesleysmith/Downloads/ilmbase-1.0.2/missing
--run makeinfo'
OBJEXT='o'
PACKAGE='ilmbase'
PACKAGE_BUGREPORT=''
PACKAGE_NAME='IlmBase'
PACKAGE_STRING='IlmBase 1.0.2'
PACKAGE_TARNAME='ilmbase'
PACKAGE_VERSION='1.0.2'
PATH_SEPARATOR=':'
PTHREAD_CC='gcc'
PTHREAD_CFLAGS='-D_THREAD_SAFE '
PTHREAD_LIBS=''
RANLIB='ranlib'
SED='/usr/bin/sed'
SET_MAKE=''
SHELL='/bin/sh'
STRIP='strip'
VERSION='1.0.2'
ac_ct_AR='ar'
ac_ct_CC='gcc'
ac_ct_CXX='g++'
ac_ct_F77=''
ac_ct_RANLIB='ranlib'
ac_ct_STRIP='strip'
acx_pthread_config=''
am__fastdepCC_FALSE='#'
am__fastdepCC_TRUE=''
am__fastdepCXX_FALSE='#'
am__fastdepCXX_TRUE=''
am__include='include'
am__leading_dot='.'
am__quote=''
am__tar='${AMTAR} chof - "$$tardir"'
am__untar='${AMTAR} xf -'
bindir='${exec_prefix}/bin'
build='i686-apple-darwin10.4.0'
build_alias=''
build_cpu='i686'
build_os='darwin10.4.0'
build_vendor='apple'
datadir='${prefix}/share'
exec_prefix='${prefix}'
host='i686-apple-darwin10.4.0'
host_alias=''
host_cpu='i686'
host_os='darwin10.4.0'
host_vendor='apple'
includedir='${prefix}/include'
infodir='${prefix}/info'
install_sh='/Users/wesleysmith/Downloads/ilmbase-1.0.2/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localstatedir='${prefix}/var'
mandir='${prefix}/man'
mkdir_p='$(install_sh) -d'
oldincludedir='/usr/include'
prefix='/usr/local'
program_transform_name='s,x,x,'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''
## ----------- ##
## confdefs.h. ##
## ----------- ##
#define HAVE_COMPLETE_IOMANIP 1
#define HAVE_DLFCN_H 1
#define HAVE_INTTYPES_H 1
#define HAVE_LIMITS_H 1
#define HAVE_MEMORY_H 1
#define HAVE_PTHREAD 1
#define HAVE_SEMAPHORE_H 1
#define HAVE_STDINT_H 1
#define HAVE_STDLIB_H 1
#define HAVE_STRERROR 1
#define HAVE_STRINGS_H 1
#define HAVE_STRING_H 1
#define HAVE_SYS_STAT_H 1
#define HAVE_SYS_TYPES_H 1
#define HAVE_UNISTD_H 1
#define HAVE_UNISTD_H 1
#define PACKAGE "ilmbase"
#define PACKAGE_BUGREPORT ""
#define PACKAGE_NAME "IlmBase"
#define PACKAGE_STRING "IlmBase 1.0.2"
#define PACKAGE_TARNAME "ilmbase"
#define PACKAGE_VERSION "1.0.2"
#define STDC_HEADERS 1
#define STDC_HEADERS 1
#define VERSION "1.0.2"
#endif
#ifdef __cplusplus
extern "C" void exit (int);
configure: exit 0
_______________________________________________
Openexr-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/openexr-devel