Re: restarting processes (was: "")

On 27 May 2016 at 08:28, Martin Pala <address@hidden> wrote:

You can create an rpm from the source code directly:

rpmbuild -tb monit-5.18.tar.gz

Monit can be downloaded here: https://mmonit.com/monit/dist/

Best regards,
Martin

On 27 May 2016, at 08:10, Volkan Celebi <address@hidden> wrote:

5.14
It is the latest monit in yum repository

On Fri, 27 May 2016, 08:03 Martin Pala, <address@hidden> wrote:
Which monit version it is?

In the past, monit cleared the environment variables and reset PATH when executing the start program in a sandbox. When the program depends on some env. variable or used for example relative paths internally, it then failed. Old monit versions also didn't log the program output.

I recommend to upgrade monit (latest release 5.18 is recommended).

Best regards,
Martin

On 26 May 2016, at 22:13, Volkan Celebi <address@hidden> wrote:

Thanks again,

It is really newbie questions but unfortunately I should ask again. I wrote this into config file

check process mumudvb11096 matching "mumudvb -d -c /root/42/11096"
start program = "/usr/bin/mumudvb -d -c /root/42/11096"

I didn't write any stop program parameter because I haven't got anyone. After that I checked via Webgui and It was working. I have killed the working pid of "mumudvb -d -c /root/42/11096" and tested it but I got "Execution failed error" I can start mumudvb from every location with this command = "mumudvb -d -c /root/42/11096" but now I didn't understand why it didn't work. Also monit procmatch gives no error for "/usr/bin/mumudvb -d -c /root/42/11096"

any help would be appreciated

Have a nice day

On 26 May 2016 at 15:37, Martin Pala <address@hidden> wrote:
Hello,

you can use the pattern based process check:

check process mumdvb11557 matching "mumudvb -d -c /root/42/11557"
start program = ... #set your start program here
stop program = ... #set your stop program here

You can use monit CLI interface to test patterns:

monit procmatch "mumudvb -d -c /root/42/11557"

Note: upgrade to monit 5.18 is recommended if you have a process similar to apache fork mode (where a master process spawns children and all match the same pattern).

Regards,
Martin

> On 26 May 2016, at 14:05, Volkan Celebi <address@hidden> wrote:
>
> Hello,
>
> Thanks your answer Martin. I decided intall Monit which mumudvb working Server, too. I think It would be far away easier to make a working config. I will ask further help. For example this process from system killed:
>
>> mumudvb -d -c /root/42/11557
> How can I realise this process working not anymore and it should be start again. Because of this, as far as I now there is no any possibility to give any process to custom pid. Every pids assigning from system automatically. Any small tips/config would be very nice.
>
> Thanks in advance
> Volkan Çelebi
>
>
>
> On 23 May 2016 at 14:30, Martin Pala <address@hidden> wrote:
> Hello,
>
> you can restart the process on remote machine only if you install monit on that remote machine too - it provides an HTTP GUI, which can be used to restart services. Each mumudvb instance will then have its own service entry in monit configuration file.
>
> Regards,
> Martin
>
>
>> On 23 May 2016, at 13:12, Volkan Celebi <address@hidden> wrote:
>>
>> Dear all,
>>
>> for a while I am looking a solution for this. I installed monit on my server and I can get alerts but I need monitor processes on different machines and I have to start them from monit installed machine. I need monitor these process but problem is if any "mumudvb" process fail I have to start it with custom configuration file. Every single mumudvb process works with different config files. Is there any way to realize it monit?
>>
>> Here is the quickview to processes:
>>
>> address@hidden ~]# ps aux | grep mumudvb
>> root 5034 4.8 0.6 103040 21116 ? SLl Apr29 175:13 mumudvb -d -c /root/42/12729
>> root 5691 6.1 0.6 37504 21108 ? SLl Apr29 221:56 mumudvb -d -c /root/42/12422
>> root 6160 3.1 0.6 37608 21080 ? SLl Apr29 114:26 mumudvb -d -c /root/42/12265
>> root 6796 7.6 0.6 103060 21136 ? SLl Apr29 275:19 mumudvb -d -c /root/42/10962
>> root 7209 7.2 0.6 37524 21128 ? SLl Apr29 263:44 mumudvb -d -c /root/42/11855
>> root 7774 6.6 0.6 37516 21120 ? SLl Apr29 241:36 mumudvb -d -c /root/42/11557
>> root 8154 8.4 0.6 37516 21120 ? SLl Apr29 304:43 mumudvb -d -c /root/42/11957
>> root 10964 5.6 0.6 37484 21088 ? SLl 11:50 31:36 mumudvb -d -c /root/19/12544.75
>> root 13578 6.9 0.7 40092 23680 ? SLl 10:10 45:38 mumudvb -d -c /root/13/12520
>> root 19671 0.0 0.0 112644 932 pts/12 R+ 21:11 0:00 grep --color=auto mumudvb
>> root 24324 3.2 0.6 103040 21116 ? SLl Apr29 116:15 mumudvb -d -c /root/42/12525
>> root 27398 7.7 0.6 37508 21112 ? SLl 10:25 50:11 mumudvb -d -c /root/19/12187.50
>> root 32246 3.3 0.6 103124 21200 ? SLl Apr29 110:28 mumudvb -d -c /root/42/11096 -v --card7
>>
>> --
>> Volkan Çelebi
>> IT System Spezialist
>> Heimstr. 10
>> 8953 Dietikon
>> Tel: +41 788 488 319
>> --
>> To unsubscribe:
>> https://lists.nongnu.org/mailman/listinfo/monit-general
>
>
> --
> To unsubscribe:
> https://lists.nongnu.org/mailman/listinfo/monit-general
>
>
>
> --
> Volkan Çelebi
> IT System Spezialist
> Heimstr. 10
> 8953 Dietikon
> Tel: +41 788 488 319
> --
> To unsubscribe:
> https://lists.nongnu.org/mailman/listinfo/monit-general

--
To unsubscribe:
https://lists.nongnu.org/mailman/listinfo/monit-general

--
Volkan Çelebi
IT System Spezialist
Heimstr. 10
8953 Dietikon
Tel: +41 788 488 319

--
To unsubscribe:
https://lists.nongnu.org/mailman/listinfo/monit-general

--
To unsubscribe:
https://lists.nongnu.org/mailman/listinfo/monit-general
--
To unsubscribe:
https://lists.nongnu.org/mailman/listinfo/monit-general

--
To unsubscribe:
https://lists.nongnu.org/mailman/listinfo/monit-general

Volkan Çelebi
IT System Spezialist
Heimstr. 10

8953 Dietikon

Tel: +41 788 488 319

From:	Volkan Celebi
Subject:	Re: restarting processes (was: "")
Date:	Fri, 27 May 2016 14:08:11 +0200