Re: Fwd: radius syntax?

[Len Conrad]

>  Which should work.  I wrote the RADIUS test, and use it daily with
>FreeRADIUS.
>
>> this always fails, from the monit.log:
>> 
>> [CDT Oct 10 13:11:49] error    : 'rad1.xxx.net-RADACCT' failed protocol test 
>> [RADIUS] at INET[xx.4.62.16:1812testing123] via UDP -- RADIUS: error sending 
>> query -- No route to host
>
>  The "no route to host" is an error produced by the operating system.
>It means that there is no route to that IP address.
>
>  The problem is your network is broken.  There's nothing wrong with the
>RADIUS test.
>
>  Adds are that you can't "ping" that IP address, either.

the monit that is failing the radius test is running on the same machine as 
FreeRadius.

doesn't the concatenated IP:portsecret error give some hint?

"failed protocol test [RADIUS] at INET[xx.4.62.16:1812testing123] via UDP"

Len