Re: radius syntax?

[Noel]

On 10/10/2012 1:16 PM, Len Conrad wrote:
> the doc says:
>
> check process radiusd with pidfile /var/run/radiusd.pid
>        start program = "/etc/init.d/freeradius start"
>        stop program = "/etc/init.d/freeradius stop"
>        if failed host 127.0.0.1 port 1812 type udp protocol radius 
>            secret testing123 
>        then alert
>
> my config is (monit 5.5, fbsd 8.2), xxx.4.63.16 is the local host:
>
> check process rad1.xxx.net-RADIUS with pidfile /var/run/radiusd.pid   
>   start program = "/usr/local/etc/rc.d/radiusd start"
>   stop  program = "/usr/local/etc/rc.d/radiusd stop"
>   if failed host xx.4.62.16 port 1812 type udp protocol radius
>      secret testing123
>   then alert      
>
> this always fails, from the monit.log:
>
> [CDT Oct 10 13:11:49] error    : 'rad1.xxx.net-RADACCT' failed protocol test 
> [RADIUS] at INET[xx.4.62.16:1812testing123] via UDP -- RADIUS: error sending 
> query -- No route to host
>
> Len

Is the network intended to be different?  Third octet  62 vs 63?




  -- Noel Jones