ACPI

[Andrew Holt]

Hi,

Is it possible to use monit to periodically check the status, as reported by 
acpi e.g:

acpi -V
Battery 0: Full, 100%, rate information unavailable
Battery 0: design capacity 5200 mAh, last full capacity 5200 mAh = 100%
Adapter 0: on-line
Thermal 0: ok, 50.0 degrees C
Thermal 0: trip point 0 switches to mode critical at temperature 90.0 degrees C
Cooling 0: Processor 0 of 7 

So send an alert if power off-line and battery <=50% or Temperature > 80 deg C

Thanks.

Andrew