Re: [monit] Linking monit to lm-sensors

[Martin Pala]

Currently there is no native support for reading sensors, but it could 
be added in the future (via IPMI or something similar).


Currently you can use the hint described in monit FAQ (question no. 13 - 
example for monitoring Solaris Volume Manager devices by Pavel Urban):

http://www.tildeslash.com/monit/doc/faq.php



We also plan to add native support for external scripts in the future:

http://www.tildeslash.com/monit/doc/next.php#33


Martin



Patrick Zaloum wrote:
> Hello,
> I was wondering if anyone has had any experience linking monit to 
> lm-sensors readouts to monitor for excessively high temperatures, low 
> fan speeds, etc. or if anyone would have an idea how to go about it. 
> Essentially, running 'sensors' provides a readout of your current state 
> as shown below, how could it be watched by monit?
>
>     # sensors
>     w83627dhg-isa-0290
>     Adapter: ISA adapter
>     Vcore:     +1.27 V  (min =  +1.15 V, max =  +1.50 V)
>     +12V:     +11.46 V  (min = +11.40 V, max = +12.62 V)
>     +3.3V:     +3.22 V  (min =  +3.14 V, max =  +3.47 V)
>     +5V:       +5.25 V  (min =  +4.66 V, max =  +5.35 V)
>     CPU Fan:   1811 RPM  (min =  600 RPM, div = 32)
>     MB Temp:     +32°C  (high =   +50°C, hyst =   +45°C)
>     CPU Temp:  +31.0°C  (high = +60.0°C, hyst = +50.0°C)
>     coretemp-isa-0000
>     Adapter: ISA adapter
>     Core 0:      +26°C  (high =   +85°C)
>     coretemp-isa-0001
>     Adapter: ISA adapter
>     Core 1:      +29°C  (high =   +85°C)
>
>  
>  
>
>
> ------------------------------------------------------------------------
>
> --
> To unsubscribe:
> http://lists.nongnu.org/mailman/listinfo/monit-general