Re: [monit] Question about multi-host testing

[Pablo Iranzo Gómez]

        List, here is the output from monit running in interactive mode with
-vv:

From log start:
-----------------------------------------------------------------------
Remote Host Name      = ro5000-siNmG20876YFyCu20879
 Monitoring mode      = active
 ICMP                 = if failed Echo Request count 1 with timeout 10
seconds 1 times within 1 cycle(s) then alert else if passed 1 times
within 1 cycle(s) then alert
 Alert mail to        = address@hidden
   Alert on           = All events
   Alert reminder     = 1 cycles

Remote Host Name      = pos10.5000-siNmG20876YFyCu20879
 Monitoring mode      = active
 Depends on Service   = ro5000-siNmG20876YFyCu20879
 ICMP                 = if failed Echo Request count 1 with timeout 10
seconds 1 times within 1 cycle(s) then alert else if passed 1 times
within 1 cycle(s) then alert
 Alert mail to        = address@hidden
   Alert on           = All events
   Alert reminder     = 1 cycles


From Log checking:
-----------------------------------------------------------------------
'ro5000-siNmG20876YFyCu20879' icmp ping failed
'ro5000-siNmG20876YFyCu20879' failed ICMP test [Echo Request]
ICMP failed notification is sent to address@hidden
'ro5000-siNmG20876YFyCu20879' icmp ping failed, skipping any port
connection tests
'pos10.5000-siNmG20876YFyCu20879' icmp ping failed
'pos10.5000-siNmG20876YFyCu20879' failed ICMP test [Echo Request]
ICMP failed notification is sent to address@hidden
'pos10.5000-siNmG20876YFyCu20879' icmp ping failed, skipping any port
connection tests


Config files:
-----------------------------------------------------------------------
check host ro5000-siNmG20876YFyCu20879 with address 10.39.16.1
        if failed ICMP type ECHO count 1 timeout 10 seconds then alert
        alert address@hidden with reminder on 1 cycle

check host pos10.5000-siNmG20876YFyCu20879 with address 10.39.16.10
        if failed ICMP type ECHO count 1 timeout 10 seconds then alert
        alert address@hidden with reminder on 1 cycle
        depends on ro5000-siNmG20876YFyCu20879



        Any hint?

        Thanks in advance,
        Pablo


El lun, 29-10-2007 a las 21:51 +0100, Pablo Iranzo Gómez escribió:
>       Martin,
> 
> On Mon, 29 Oct 2007, Martin Pala wrote:
> > Can you run monit in verbose mode (-v option) and send the log? You'll
> > see in it what happened in more detail.
> 
>       Sure, will do it tomorrow early in the morning :)
> 
> > >   If I just put "if failed icmp then alert" monit complains about
> > > configuration (I'm using monit-4.9-1), so either I'm doing something
> > > wrong or it's a problem with this verson.
> >
> > I'm sorry - this was typo (i wrote the example just from memory so, the
> > "type echo" was missing).
> 
>       Don't worry, I was just trying just in case I did something wrong
> :)
> 
>       Thanks again
>       Pablo
> 
> 
> --
> To unsubscribe:
> http://lists.nongnu.org/mailman/listinfo/monit-general
-- 

Pablo Iranzo Gómez (address@hidden)
RHCE/Global Profesional Services Consultant Spain
Phone: +34 645 01 01 49 (CET/CEST)
GnuPG KeyID: 0xFAD3CF0D

--
Inscrita en el Reg. Mercantil de Madrid – C.I.F. B-82 65 79 41
Directores: Michael Cunningham, Charlie Peters y David Owens
Dirección Registrada: Red Hat S.L., C/ Velazquez 63, Madrid 28001, España
Dirección contacto: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, Planta 3ºD, 28016 
Madrid, Spain

signature.asc
Description: Esta parte del mensaje está firmada digitalmente