Re: [lwip-users] lwIP on a Microcontroller with two MACs

[tsotb]

Hello,

was 1.) also a question?
I would not start a new design  with a controller which is not recommended
for new designs.
Take a look at the NXP iMX1060 which is faster and quite new. You can get
examples with lwIP in there SDK from here:
https://mcuxpresso.nxp.com/en/select

Best Regards



-----Ursprüngliche Nachricht-----
Von: lwip-users <address@hidden> Im Auftrag von
sanjayks
Gesendet: Donnerstag, 2. Mai 2019 11:23
An: address@hidden
Betreff: [lwip-users] lwIP on a Microcontroller with two MACs

Hi All,
   I am new to lwIP. I have a requirement in front of me. Please guide me
where to look for.

Requirement:
1. I need a card with two ethernet ports. ( Two PHY, two MACs and two IP
addresses). The hardware designer suggested Atmel SAM9X25 which has two
PHYs.
2. I do not see a port of lwIP for SAM9X25.
3. Where do I start from? Can I start with a lwIP port for any SAM series of
Atmel and add my own ethernet driver which can handle two MACs ?
4. Are there any specific things that need to be handled when I try to use
lwIP on a microcontroller with two PHYs.

Please suggest what to look for and where to look for. Shall do the
necessary hardwork myself :).

Regards,
Sanjay



--
Sent from: http://lwip.100.n7.nabble.com/lwip-users-f3.html

_______________________________________________
lwip-users mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/lwip-users