Re: [lwip-users] tcp_connect doesn't start the callback function

[Marianovich, Andre]

Ok, now I took a design from xilinx with all the necessary interrupt 
stuff, etc. and I think it should work now, but it doesn't. It's all the 
same like before. The tcp_connect function doesn't seem to call the 
callback function, and the transfer_data function will be called several 
times but than it's sticking (I added a simple print command to check, 
to where it runs).


Marianovich, Andre schrieb:
> I already suspect that but till now nobody could help me so far in the 
> official support forums from xilinx.
>
> However, thanks for your help. Maybe someone's here with some xilinx 
> experiences too.
>
>
>
> Kieran Mansley schrieb:
> > On Fri, 2010-03-19 at 14:16 +0100, Marianovich, Andre wrote:
> > > Well, I made some test with wireshark and there was not a single bit 
> > > sent from the board.
> > >
> > > Apart from that the Xilinx documents says that raw api needs
> > > interrupts and maybe I have to trace something more in that way. 
> > > However, if
> > > there are some more hints tell me please.
> >
> > It sounds like you need some help from Xilinx, or someone who
> > understands that setup, to get it properly integrated into your hardware
> > project.  I don't have any experience of that, so can't help, but there
> > may be others on the list who have used the same hardware and Xilinx
> > port of lwIP who may be able to offer advice.
> >
> > Kieran
> >
> >
> >
> > _______________________________________________
> > lwip-users mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/lwip-users
>
>
> _______________________________________________
> lwip-users mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/lwip-users