[lwip-users] Re: More help with socket

[Oscar F]

The second part is not correct because always my task have the control and another task never enter.
can i use the select option? with TCP connection and another idea to listen about three socket and blocking while there isn´t data? 

Thanks again
Oscar

On Tue, Sep 8, 2009 at 7:59 PM, Oscar F <address@hidden> wrote:

I know more data about the application. The connection is TCP, and i have to open 6 socket, all of them unidirectional , 3 for request and 3 for response.

Logical links connection sequence

logical links connection process shall be initiated by the PC unit: it will connect sequentially (one after the other) all the logical links.

At power-on/reset, the EVK1100 application shall first create the sockets in order to be ready for accepting a connection in all of them.

my first question is the function accept is blocking the code, because i´ll do of this way

-createsockets( ) (the six socket)

-bind( ) the six socket

-listen ( ) the six socket

and then

do {

-accept ( ) for socket one

if the answer is OK

-accept () for the second one

if the answer is OK

...

-accept () for the six one

if the answer is OK then fin=true

}while (fin)

 

is that correct?

the next step is listen for 3 socket to request and this is my idea:

do{

if recv(socke1)

 {

  //process

}

if recv(socket2)

 {

  //process

}

if recv(socket3)

 {

  //process

}

}while (fin2)

is a good idea?

thanks for all

Oscar