RE: [lwip-users] SLIP form windows

[Ivarsson Magnus]

I have not tested SLIP and Y2K myself, but an idea is that you might need to 
hardwire DCD (data carrier detect) to DTE (data terminal ready) and DCE (data 
set ready). 

While you are at it why not wire RTS and CTS together aswell (if you are not 
using hw handshaking of course)


BR, Magnus

> -----Original Message-----
> From: Jani Monoses [mailto:address@hidden
> Sent: den 28 maj 2003 11:17
> To: address@hidden
> Subject: [lwip-users] SLIP form windows
> 
> 
> Hi
> 
> Could somebody here using lwIP/SLIP and a windows host tell me what it
> takes to get them talking to eachother?
> 
> I tried both W2K and XP by doing:
> make new connection - direct cable - select SLIP-unix - set IP address
> in TCP/IP settings etc.
> But when telling it to connect it says dialing... and stays there
> Why I don't know, I selected COM1 no modem and SLIP does not need any
> negotiation so I have no idea what's happening..
> 
> Do addresses/routes need to be set from netsh or some other command
> line?
> 
> thanks
> Jani
> 
> PS: I saw this has been discussed in January too but I couldn't get
> anywhere even after reading that thread.
> 
> 
> _______________________________________________
> lwip-users mailing list
> address@hidden
> http://mail.nongnu.org/mailman/listinfo/lwip-users
>