[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Ltib] Ubuntu 12.04 compatibility (was Re: Build problem in Ubuntu 12.04
|
From: |
Stuart Hughes |
|
Subject: |
[Ltib] Ubuntu 12.04 compatibility (was Re: Build problem in Ubuntu 12.04 LTS) |
|
Date: |
Sun, 01 Jul 2012 19:36:25 +0100 |
|
User-agent: |
Mozilla/5.0 (X11; Linux i686; rv:13.0) Gecko/20120615 Thunderbird/13.0.1 |
Hi everyone,
I managed to get some time to test LTIB on Ubuntu 12.04 (Xubuntu, 32
bit). There were no significant changes needed, although I checked in
some minor changes to clear some warning messages (the force-debian one).
So if you want to try on Ubuntu 12.04 and you check-out the latest from
CVS and follow these step, you should be successful.
---+ Steps to install LTIB on Ubuntu 12.04
Install dependencies (yours may vary):
sudo apt-get install g++ zlib1g-dev rpm libncurses5-dev patch
sudo visudo
Add a line to enable sudo for your username. For example mine is seh
and this is what I added at the end of the file:
seh ALL = NOPASSWD: /usr/bin/rpm, /opt/ltib/usr/bin/rpm
Run ltib after CVS checkout:
./ltib
Regards, Stuart
On 25/05/12 08:45, Stuart Hughes wrote:
> Hi Henry,
>
> Unfortunately I don't have Ubuntu 12.04 or the time to install it. If
> anyone has a machine setup that I could log into and take a look, that
> would help (I would need sudo access for though).
>
> Sorry about that, but work pressures call me to other things.
>
> Regards, Stuart
>
> On 25/05/12 08:24, Li Yuan-Lung wrote:
>> Dear Stuart Hughes,
>> Did you try the ltib build with the Ubuntu 12.04?
>> Do you have any other suggestions?
>>
>> Henry
>>
>> 2012/5/14 Li Yuan-Lung <address@hidden
>> <mailto:address@hidden>>
>>
>> Dear Stuart Hughes,
>> I have try your debug message and the log as attachment.
>>
>> Thank you very much!
>>
>> Henry
>>
>> 2012/5/11 Stuart Hughes <address@hidden <mailto:address@hidden>>
>>
>> Hi Henry,
>>
>> There's not much point downloading this directly as there will
>> be many more downloads needed later on.
>>
>> I have not got this Ubuntu, so I have to guess a little. Can
>> you put this change in to see if LTIB is actually trying to
>> get the file. If it is, add some more debugs to try to figure
>> out what's going on. The odd thing is it appears that the
>> get_file function is not doing anything (or not being called):
>>
>> Index: bin/Ltibutils.pm
>> ===================================================================
>> RCS file: /sources/ltib/ltib/bin/Ltibutils.pm,v
>> retrieving revision 1.38
>> diff -u -r1.38 Ltibutils.pm
>> --- bin/Ltibutils.pm 7 Aug 2011 15:05:53 -0000 1.38
>> +++ bin/Ltibutils.pm 11 May 2012 10:01:36 -0000
>> @@ -254,6 +254,7 @@
>> sub get_file
>> {
>> my ($url, $cf, $force_md5) = @_;
>> +warn "get_file: @_";
>> warn("no url passed"), return unless $url;
>> warn("lpp: $cf->{lpp} is not a directory"), return unless
>> -d $cf->{lpp};
>> my ($path, $refmd5);
>>
>> Regards, Stuart
>>
>>
>> On 10/05/12 09:00, Li Yuan-Lung wrote:
>>> Dear Stuart,
>>> Attachment is the new log without "-v" option and the diff
>>> result.
>>> May I get the package manually as a workaround?
>>>
>>> The connection seems no problem to the server. I don't know
>>> why the ltib can not get it. Please kindly give me the direct
>>> path and tell me local placement folder(is it "/tmp/rpm_xxx/"
>>> or "/tmp/rpm_xxx/RPMS" ?), I want to try it by using wget
>>> command.
>>>
>>> Henry
>>>
>>>
>>> 2012/5/10 Stuart Hughes <address@hidden <mailto:address@hidden>>
>>>
>>> Hi Henry,
>>>
>>> This is a different error:
>>>
>>>
>>> Build path taken because: no prebuilt rpm,
>>> Can't get: rpm-4.0.4.tar.gz at ./ltib line 834.
>>> Died at ./ltib line 2539.
>>> traceback:
>>> main::check_rpm_setup:2539
>>>
>>> main::host_checks:1520
>>> main:561
>>>
>>> which indicates that ltib was not able to download the
>>> source file. Is your network connection okay? ltib will
>>> try to connect to http://bitshrine.org/.... to get files
>>> on demand.
>>>
>>> Can you re-run without the -v option and cut and paste
>>> any relevant lines. Also if you've made changes show what
>>> they are (a cvs diff -u).
>>>
>>> Regards, Stuart
>>>
>>>
>>>
>>> On 05/07/2012 02:48 AM, Li Yuan-Lung wrote:
>>>
>>> Dear Stuart,
>>> Here is the result,
>>>
>>> ~/prjs/ltib$ rpm --force-debian
>>> ~/prjs/ltib$ echo $?
>>> 0
>>>
>>>
>>> I have change the line in ./ltib but still got a
>>> stuck as attachment. Please kindly check. Thank you
>>> very much!
>>>
>>>
>>> Henry
>>>
>>> 2012/5/6 Stuart Hughes <address@hidden
>>> <mailto:address@hidden> <mailto:address@hidden
>>> <mailto:address@hidden>>>
>>>
>>>
>>> Hi Li,
>>>
>>> This is a new distro, so I guess something yet
>>> again changed.
>>>
>>> Can you send me the output at the command line of
>>> the following
>>> commands:
>>>
>>> rpm --force-debian
>>> echo $?
>>>
>>> I want to see:
>>> 1. If it has this option
>>> 2. If it returns an error, if not.
>>>
>>> There's check at line 2518 that's supposed to
>>> handle whether or
>>> not that
>>> flag is used. Some versions of distros need it.
>>>
>>> Regards, Stuart
>>>
>>> On 04/05/12 10:10, Li Yuan-Lung wrote:
>>> > Dear Ltib members,
>>> > Our company is considered to use the Ubuntu
>>> 12.04 LTS for the
>>> long term
>>> > support requirement.
>>> > After I setup the environment. The ltib seems to
>>> have an old
>>> problem,
>>> > which always build fail at "rpm-fs" package.
>>> > I am still finding the solution, please kindly
>>> have some
>>> suggestion for
>>> > me, thank you very much!
>>> >
>>> > Below is the content of host_config.log:
>>> >
>>> > rpmdb: --force-debian: unknown option
>>> >
>>> > Processing platform: host support
>>> > ===================================
>>> >
>>> > Processing: rpm-fs
>>> > ====================
>>> > Build path taken because: no prebuilt rpm,
>>> > Can't get: rpm-4.0.4.tar.gz at ./ltib line 834.
>>> > Died at ./ltib line 2538.
>>> > traceback:
>>> > main::check_rpm_setup:2538
>>> > main::host_checks:1520
>>> > main:561
>>> >
>>> >
>>> > Started: Fri May 4 17:04:13 2012
>>> > Ended: Fri May 4 17:04:17 2012
>>> > Elapsed: 4 seconds
>>> >
>>> > Use of uninitialized value in concatenation
>>> (.) or string at
>>> ./ltib
>>> > line 2858.
>>> > Use of uninitialized value in concatenation
>>> (.) or string at
>>> ./ltib
>>> > line 2858.
>>> > VERSION : 11.4.1
>>> > CVS_VERSION : $Revision: 1.86 $ (Savannah)
>>> > PLATFORM : host
>>> > GNUTARCH : i686
>>> > TOOLCHAIN :
>>> > TOOLCHAIN_CFLAGS :
>>> >
>>> > These packages failed to build:
>>> > rpm-fs
>>> >
>>> > Build Failed
>>> >
>>> >
>>>
>>>
>>>
>>>
>>>
>>>
>>> --
>>> Best Regards,
>>>
>>> Henry Li
>>> SW Engineer of Climax Co.
>>> TEL: +886-2-2794-0001 ext.231
>>> <tel:%2B886-2-2794-0001%20ext.231>
>>> <tel:%2B886-2-2794-0001%20ext.231>
>>> FAX: +886-2-2792-6618 <tel:%2B886-2-2792-6618>
>>> <tel:%2B886-2-2792-6618>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> --
>>> Best Regards,
>>>
>>> Henry Li
>>> SW Engineer of Climax Co.
>>> TEL: +886-2-2794-0001 ext.231 <tel:%2B886-2-2794-0001%20ext.231>
>>> FAX: +886-2-2792-6618 <tel:%2B886-2-2792-6618>
>>
>>
>>
>>
>> --
>> Best Regards,
>>
>> Henry Li
>> SW Engineer of Climax Co.
>> TEL: +886-2-2794-0001 ext.231 <tel:%2B886-2-2794-0001%20ext.231>
>> FAX: +886-2-2792-6618 <tel:%2B886-2-2792-6618>
>>
>>
>>
>>
>> --
>> Best Regards,
>>
>> Henry Li
>> SW Engineer of Climax Co.
>> TEL: +886-2-2794-0001 ext.231
>> FAX: +886-2-2792-6618
>
>
>
> _______________________________________________
> LTIB home page: http://ltib.org
>
> Ltib mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/ltib
>
- [Ltib] Ubuntu 12.04 compatibility (was Re: Build problem in Ubuntu 12.04 LTS),
Stuart Hughes <=
Re: [Ltib] Ubuntu 12.04 compatibility (was Re: Build problem in Ubuntu 12.04 LTS), Li Yuan-Lung, 2012/07/04