[Ltib] MCF5475 Toolchain

[Andreas Roth]

Hello there,

I guess I am going to ask the wrong question, but at this point I am pretty much out of options.

I intend to compile a Build for a MCF5475 with the latest Linux Kernel. Unfortunately this targets config file does not even contain a single Toolchain per default. I tried to modify the config file in order to use the toolchains linked at the "Cobra 5475" Target, but these did not work either. I get the attached error message as I run LTIB (used Kernel so far is the MCF547X Default 2.6.24).

So in order to solve my problem please tell me either where to get a working toolchain for this target, or how to modify the existing toolchain, or at least give my a hint into the right direction, so I can do further research on my own.

Best regards,

Andreas Roth

 

+ cp -f ./.config /home/tartaros/ltib/config/platform/mcf547x_8x/linux-2.6.x.config.dev
+ '[' -n '' ']'
+ '[' '%{kernel_series}' = 2.4 ']'
+ make ARCH=m68k 'HOSTCC=ccache /usr/bin/gcc -B/usr/bin//' uImage
make: m68k-linux-gnu-gcc: Command not found
scripts/kconfig/conf -s arch/m68k/Kconfig
make: m68k-linux-gnu-gcc: Command not found
make: *** No rule to make target `uImage'.  Stop.
error: Bad exit status from /home/tartaros/ltib/tmp/rpm-tmp.49210 (%build)


RPM build errors:
    Bad exit status from /home/tartaros/ltib/tmp/rpm-tmp.49210 (%build)
Build time for kernel-2.6.24-m547x_8x: 26 seconds

Failed building kernel-2.6.24-m547x_8x


f_buildrpms() returned an error, exiting
traceback:
 main:567


Started: Mon Apr 18 16:44:42 2011
Ended:   Mon Apr 18 16:45:35 2011
Elapsed: 53 seconds

VERSION          : 10.1.1
CVS_VERSION      : $Revision: 1.75 $ (Savannah)
PLATFORM         : mcf547x_8x
GNUTARCH         : m68k
TOOLCHAIN        : mtwk-lnx-cfv4e-gcc-3.4.0-glibc-2.3.2-v4e-0.28-8.i686.rpm
TOOLCHAIN_CFLAGS : -mcfv4e

These packages failed to build:
kernel-2.6.24-m547x_8x

Build Failed

Exiting on error or interrupt
address@hidden:~/ltib>