Re: [Linphone-users] Linphone call breaks after 30-40 seconds

[Lorrin]

Why would there be no packages received from the peer, the audio is heard correctly the whole time?

What should I capture with Wireshark? Apply any filter?

On 29.10.2014 00:36, Jesper Staun Hansen wrote:

The connection is dropped if no packets are being received from the peer.
Which it kinda sounds like here.
A wireshark could confirm that

Den 28/10/2014 19:57 skrev "Lorrin" <address@hidden>:

Hi,

thanks for answering. Not sure how to collect them, what do you suggest? Should I just use " --logfile" option for this?

Thanks!

On 28.10.2014 17:11, BIENKOWSKI Guillaume wrote:

Would you have (redacted) debug logs ?

Guillaume BIENKOWSKI

http://www.belledonne-communications.com/

sip:address@hidden

On Tue, Oct 28, 2014 at 3:59 PM, Lorrin <address@hidden> wrote:

Hi all,

I have an issue I can't seem to solve. I have a direct connection from my device with Linphone to an ATA (analog telephone adapter), so there is no registrar or proxy, etc, just a direct IP calling.
And this seems to work, but only for about 30-40 seconds, after which the connection is dropped for no apparent reason. I tried setting the nat_address to my device in the .linphonerc, but it didn't help.

Any ideas why this is happening? I guess some timeout happens for the control channel or something...

Regards!

_______________________________________________
Linphone-users mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/linphone-users

_______________________________________________
Linphone-users mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/linphone-users

_______________________________________________
Linphone-users mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/linphone-users

_______________________________________________
Linphone-users mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/linphone-users