Re: Grub2 install with / on lvm

[Andrei Borzenkov]

В Wed, 11 Feb 2015 11:56:38 -0800 (PST)
address@hidden пишет:

> Well, since I have been busy with other things, I have not done the 
> re-install yet, or made any changes to the system.
> 
> The image showing the output of the grub commands are at this location.
> 
> http://imagebin.ca/v/1rJrKBNHo1ZZ
> 

The value of $prefix is bogus. It points to ESP (EFI System Partition)
but with non-existing path. One of (hd0,gpt1)/EFI/ubuntu or direct LVM
reference would work.

Quick workaround is to create /boot/efi/boot/grub and copy grub.cfg
from /boot/efi/EFI/ubuntu in there.

Does it work?

> Jeff
> 
> 
> -----Original Message-----
> From: "Andrei Borzenkov" <address@hidden>
> Sent: Wednesday, February 11, 2015 11:10am
> To: address@hidden
> Cc: address@hidden
> Subject: Re: Grub2 install with / on lvm
> 
> В Wed, 11 Feb 2015 09:24:01 -0800 (PST)
> address@hidden пишет:
> 
> > Well if you are confused, then that leaves me completely clueless.  I have 
> > not changed anything on the system since I started this thread.  I just 
> > rebooted the system again and it goes straight to a grub prompt.  I can get 
> > it to boot by using the SuperGrub2 CD and choosing to add support for LVM 
> > only, then a bootable kernel shows up in the SuperGrub2 menu list.
> 
> OK, so please could you boot in grub prompt, do
> 
> set pager=1
> set
> ls -l
> 
> and upload somewhere pictures (unless you are going to write it down).
> 
> 
> 
> _______________________________________________
> Help-grub mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/help-grub