Hi,
With grub2,what are the things I should take care, if I have another hard disk (ide , primary) with windows.
My initial boot device is a sata one with linux.
This is my device map
(hd0) /dev/sda
(hd1) /dev/hda
My fdisk
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 3647 29294496 83 Linux
/dev/sda2 3648 4133 3903795 82 Linux swap / Solaris
/dev/sda3 4134 10322 49713142+ 83 Linux
/dev/sda4 10323 19457 73376887+ 5
Extended
/dev/sda5 10323 19457 73376856 83 Linux
Disk /dev/hda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 9729 78148161 7 HPFS/NTFS
/dev/hda2 9730 19458 78140416 7 HPFS/NTFS
This is my grub.cfg for windows
menuentry "GNU/Linux, linux 2.6.15-51-amd64-k8" {
linux (hd0,1)/boot/vmlinuz-2.6.15-51-amd64-k8 root=/dev/sda1 ro
initrd (hd0,1)/boot/initrd.img-2.6.15-51-amd64-k8
}
menuentry "GNU/Linux, linux 2.6.15-51-amd64-k8 (single-user mode)" {
linux (hd0,1)/boot/vmlinuz-2.6.15-51-amd64-k8 root=/dev/sda1 ro single
initrd (hd0,1)/boot/initrd.img-2.6.15-51-amd64-k8
}
menuentry "Windows" {
chainloader (hd1,1)+1
}
Is all this is sufficient or is there anything else I should add.
Viswesh