[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Using gpsd for logging
From: |
Andreas B |
Subject: |
Re: Using gpsd for logging |
Date: |
Fri, 22 May 2020 09:34:36 +0200 |
Hi Gary,
Great, thanks for the tip.
Andreas
On Wed, May 20, 2020 at 4:46 PM Gary E. Miller <address@hidden> wrote:
>
> Yo Andreas!
>
> On Wed, 20 May 2020 11:14:19 +0200
> Andreas B <address@hidden> wrote:
>
> > I'm using a ublox 8 gps connected to (what will be) a _headless_
> > Raspberry Pi (i.e. no screen).
>
> The most common configuration.
>
>
> > I want to be able to power up my raspi
> > and be sure that it is _always_ logging the output of gpsd. Any
> > recommendations, tips or tricks?
>
> That depends on your distribution.
>
> > I was thinking about something simple as:
> > gpspipe -r > log.nmea
>
> For Gentoo, just add that to the bottom of /etc/local.d/ntpd.start
> Earlier in the same file is where you start gpsd.
>
> RGDS
> GARY
> ---------------------------------------------------------------------------
> Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
> address@hidden Tel:+1 541 382 8588
>
> Veritas liberabit vos. -- Quid est veritas?
> "If you can't measure it, you can't improve it." - Lord Kelvin