Re: [gpsd-users] Steps to re-compile GPSD from source

[Gary E. Miller]

Yo Devanand!

On Thu, 27 Jun 2019 09:12:01 +0530
Devanand Biradar <address@hidden> wrote:

> Continuing further, I want to know under gpsd source folder, in which
> file the raw gps data is processed.
> [RAW packets coming from GPS device].

Depends on which GPS you have.  u-blox are in driver_ubx.c, NMEA 0183
is in driver nmea0183.c, etc.

> 
> DEV
> 
> On Tue, Jun 25, 2019 at 12:57 AM Gary E. Miller <address@hidden>
> wrote:
> 
> > Yo Chris!
> >
> > On Mon, 24 Jun 2019 00:59:28 -0700
> > Chris Kuethe <address@hidden> wrote:
> >  
> > > If you do 'sudo scons install' gpsd should be installed  
> >
> > Except the "sudo" is a bad habit, and a very bad for your security.
> >
> > "sudo" should always be disabled.  I've seen it the cause of too
> > much grief.
> >
> > "su -" is far better security wise.
> >
> > RGDS
> > GARY
> > ---------------------------------------------------------------------------
> > Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR
> > 97703 address@hidden  Tel:+1 541 382 8588
> >
> >             Veritas liberabit vos. -- Quid est veritas?
> >     "If you can’t measure it, you can’t improve it." - Lord Kelvin
> >  




RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
        address@hidden  Tel:+1 541 382 8588

            Veritas liberabit vos. -- Quid est veritas?
    "If you can’t measure it, you can’t improve it." - Lord Kelvin

pgpnmyo0fDLRp.pgp
Description: OpenPGP digital signature