[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO
From: |
Charles Muggen |
Subject: |
Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO |
Date: |
Fri, 9 Feb 2018 02:42:51 +0100 |
Not sure if they were ever installed on this SBC.
How do I ensure all gpsd parts are ripped out of systemd config?
> Sent: Thursday, February 08, 2018 at 8:31 PM
> From: "Gary E. Miller" <address@hidden>
> To: "Charles Muggen" <address@hidden>
> Cc: "gpsd users" <address@hidden>
> Subject: Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO
>
> Yo Charles!
>
> On Fri, 9 Feb 2018 02:15:27 +0100
> "Charles Muggen" <address@hidden> wrote:
>
> > I rebooted and tried the start up sequence.
> > It's busted again. I think.
>
> Yes, you are prolly still using systemd, and that causes this symtpom.
> Be sure you ripped all gpsd parts out of systemd config.
>
> > Also, it's displaying two PPS offset bars on gpsmon...
> > The PPS bars are doubled up.
> > Is that a problem?
>
> Sorry, I never use gpsmon. I use cgps and xgps.
>
> > I went back to ntpq -p and ntpshmmon.
> > It seems to be synch'ed up.
>
> Good, if you seem SHM(1) doing PPS you just have your boot problem.
>
> > It takes a minute...
>
> Yeah. GPS used to take 12 or more minutes to start, be glaad you live
> in a modern world.
>
> > Sorry, no cut and paste here.
> > I have a really dumb terminal.
>
> We live in a modern world, you can fix that. Redirect to file works too.
>
> # ntpshmmon > tmp.log
>
> wait 10 seconds, ^C, grab the file.
>
> > I'll have to set up a SSH to be able to do some screen captures.
>
> Don't you own a cell phone? Get with the new millennium.
>
> > I was hesitant to hook it to the local network.
>
> Yes, be careful, be sure you have good passwords, remove the ntpd
> pool, etc.
>
> > Give me a minute and I'll be able to grab some screen captures.
>
> Well, if SHM(1) is working, why bother? You said it was synched up,
> that is pretty much done?
>
> RGDS
> GARY
> ---------------------------------------------------------------------------
> Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
> address@hidden Tel:+1 541 382 8588
>
> Veritas liberabit vos. -- Quid est veritas?
> "If you can’t measure it, you can’t improve it." - Lord Kelvin
>
- Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO, (continued)
- Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO, Gary E. Miller, 2018/02/09
- Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO, Charles Muggen, 2018/02/09
- Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO, Charles Muggen, 2018/02/08
- Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO, Gary E. Miller, 2018/02/08
- Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO, Charles Muggen, 2018/02/08
- Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO, Gary E. Miller, 2018/02/08
- Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO,
Charles Muggen <=
- Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO, Gary E. Miller, 2018/02/08
- Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO, Charles Curley, 2018/02/08
- Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO, Charles Muggen, 2018/02/08
- Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO, Gary E. Miller, 2018/02/08