[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO
From: |
Charles Muggen |
Subject: |
Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO |
Date: |
Fri, 9 Feb 2018 02:15:27 +0100 |
Rats!
I rebooted and tried the start up sequence.
It's busted again. I think.
Also, it's displaying two PPS offset bars on gpsmon...
The PPS bars are doubled up.
Is that a problem?
I went back to ntpq -p and ntpshmmon.
It seems to be synch'ed up.
It takes a minute...
Sorry, no cut and paste here.
I have a really dumb terminal.
I'll have to set up a SSH to be able to do some screen captures.
I was hesitant to hook it to the local network.
Give me a minute and I'll be able to grab some screen captures.
> Sent: Thursday, February 08, 2018 at 8:01 PM
> From: "Gary E. Miller" <address@hidden>
> To: "gpsd users" <address@hidden>
> Subject: Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO
>
> Yo Charles!
>
> On Fri, 9 Feb 2018 01:37:43 +0100
> "Charles Muggen" <address@hidden> wrote:
>
> > How do you capture output from ntpshmmon on a terminal screen?
>
> Screen shot? Cut and paste?
>
> Or redirect to a file:
> ntpshmmon > tmp.log
>
> Let it run 10 seconds, then ^C, grab tmp.log
>
> > Remember, I'm only running Raspbian Stretch LITE.
>
> And I'm running on RasPi with Gentoo, basically the same thing.
>
> > Also, is it safe to connect my local network cable to maybe ssh to
> > that Raspi and run it as a remote terminal?
>
> Sure, just be sure there are passwords on your login accounts.
>
> > Or will NTP start to hunt
> > for Ethernet based time servers?
>
> Looks in your ntpd config file and remove the pool options.
>
>
> RGDS
> GARY
> ---------------------------------------------------------------------------
> Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
> address@hidden Tel:+1 541 382 8588
>
> Veritas liberabit vos. -- Quid est veritas?
> "If you can’t measure it, you can’t improve it." - Lord Kelvin
>
- Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO, (continued)
- Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO, Charles Curley, 2018/02/09
- Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO, Charles Muggen, 2018/02/09
- Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO, Gary E. Miller, 2018/02/09
- Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO, Charles Muggen, 2018/02/09
- Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO, Charles Muggen, 2018/02/09
- Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO, Gary E. Miller, 2018/02/09
- Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO, Gary E. Miller, 2018/02/09
- Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO, Charles Muggen, 2018/02/09
- Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO, Charles Muggen, 2018/02/08
- Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO, Gary E. Miller, 2018/02/08
- Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO,
Charles Muggen <=
- Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO, Gary E. Miller, 2018/02/08
- Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO, Charles Muggen, 2018/02/08
- Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO, Gary E. Miller, 2018/02/08
- Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO, Charles Curley, 2018/02/08
- Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO, Charles Muggen, 2018/02/08
- Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO, Gary E. Miller, 2018/02/08