Re: [gpsd-users] NTP1 keeps going away.

[stinga]

On 09/11/17 20:48, Gary E. Miller wrote:
> Yo stinga!
>
> On Thu, 9 Nov 2017 20:40:28 +0000
> stinga <address@hidden> wrote:
>
> > All good ideas, but nope. gps is running off 3.3 votlts and I have
> > tested the GPIO pin.
>   
> Hmm, so you are on a RasPi.  What header pin are you on?  What does
> your /boot/config.txt look like?  Here is mine:

A Pi b1, I now have another sd for my pi 3 so will try that.
>      ~ # cat /boot/config.txt
>      # Disable Bluetooth so serial-tty speed is no longer tied to CPU speed
>      dtoverlay=pi3-miniuart-bt
address@hidden:~# cat /boot/cmdline.txt
dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=c7a191f8-02 
rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
>      # Uptraonics on gpio 18
>      dtoverlay=pps-gpio,gpiopin=18
dtoverlay=pps-gpio,gpiopin=24

>      kernel=zImage-4.9.34.img
Can't remember where to find this.
>      # don't need the gpu mem
>      gpu_mem=16
>      no_hz=off
>
> Do you have pps-gpio compiled into your kernel?  Or is it a kernel module
> you know is loaded?
address@hidden:~# lsmod|grep pps
pps_gpio                3025  0
pps_core                8788  1 pps_gpio

I have tried another pin

--
'ooroo

Stinga...(:)-)
---------------------------------------------------
Email: address@hidden         o
You need only two tools.        o /////
A hammer and duct tape. If it    /@   `\  /) ~
doesn't move and it should use  >  (O)  X<  ~  Fish!!
the hammer. If it moves and      `\___/'  \) ~
shouldn't, use the tape.           \\\
---------------------------------------------------