gnokii-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: gnokii smsd not giving me a clue as to why it is not sending and rec


From: helpFractal
Subject: Re: gnokii smsd not giving me a clue as to why it is not sending and receiving sms'
Date: Sat, 5 Jan 2013 09:15:11 -0800 (PST)

Hi, 

Thanks for your help so far, I got a little further ...

imac:~ fractal$ echo "This is a test message" | sudo gnokii --sendsms
447721234567 --report --smsc +447958879890

GNOKII Version 0.6.31

...etc...

Sending
Message sent: 0x65 / 0x000a
41 54 2b 43 4d 47 46 3d 30 0d                   | AT+CMGF=0       
write: [AT+CMGF=0<cr>]
read : [AT+CMGF=0<cr><cr><lf>OK<cr><lf>]
Message received: 0x65 / 0x0010
02 41 54 2b 43 4d 47 46 3d 30 0d 0d 0a 4f 4b 0d |  AT+CMGF=0   OK 
Received message type 65
PDU mode set
Sending initial sequence
Message sent: 0x66 / 0x000b
41 54 2b 43 4d 47 53 3d 33 34 0d                | AT+CMGS=34      
write: [AT+CMGS=34<cr>]
read : [AT+CMGS=34<cr><cr><lf>> ]
Message received: 0x66 / 0x000f
01 41 54 2b 43 4d 47 53 3d 33 34 0d 0d 0a 3e    |  AT+CMGS=34   > 
Received message type 66
Got response: No error.
Sending frame:
079144978578890931000C814477123254760000AA1654747A0E4ACF416110BD3CA783DAE5F93C7C2E03
Message sent: 0x21 / 0x0055
30 37 39 31 34 34 39 37 38 35 37 38 38 39 30 39 | 0791449785788909
33 31 30 30 30 43 38 31 34 34 37 37 31 32 33 32 | 31000C8144771232
35 34 37 36 30 30 30 30 41 41 31 36 35 34 37 34 | 54760000AA165474
37 41 30 45 34 41 43 46 34 31 36 31 31 30 42 44 | 7A0E4ACF416110BD
33 43 41 37 38 33 44 41 45 35 46 39 33 43 37 43 | 3CA783DAE5F93C7C
32 45 30 33 1a                                  | 2E03            
write:
[079144978578890931000C814477123254760000AA1654747A0E4ACF416110BD3CA783DAE5F93C7C2E03^Z]
SMS Send failed (Command timed out.)
Serial device: closing device

Now it is timing out when the message is being sent. I also have the same
problem in the terminal 'screen /dev/cu.usbmodem431' when it comes to the
text of the message, I am using text mode, and at the '>' prompt I type my
message then CTRL+Z and nothing happens, which is perhaps the same issue as
shown above.

Question: Why would my usb modem not respond to CTRL+Z?
-- 
View this message in context: 
http://old.nabble.com/gnokii-smsd-not-giving-me-a-clue-as-to-why-it-is-not-sending-and-receiving-sms%27-tp34856997p34862838.html
Sent from the gnokii-users mailing list archive at Nabble.com.




reply via email to

[Prev in Thread] Current Thread [Next in Thread]