gnokii using irda for model 3200

[Vikas BN]

Hi All,

   I have a Nokia 3200 which unfortunately fell from quite a height and
   now its display isn't working. The phone is otherwise working.

   I don't have a cable to connect it to the PC. But my laptop has
   IR port, so i tried gnokii using the IR port. However I'm not sure if
   it's working fine. The relevant part of the config (~/.gnokiirc) is:

   port = /dev/ttyS1
   model = 6510
   connection = infrared

   I've checked in the BIOS and the IR port is set to COM2 and IRQ3.
   The laptop is a Dell D610, running Ubuntu Dapper.

   The output of gnokii --identify:

   Serial device: opening device /dev/ttyS1
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Identifying...
Message sent: 0x1b / 0x0005
00 01 00 00 41                                  |     A
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
IMEI         : (unknown)
Manufacturer : Nokia
Model        : (unknown)
Revision     : (unknown)
Serial device: closing device

    Am I missing anything here?

-vikas