Re: Gnokii on Sharp Zaurus with Nokia 6150

[Pawel Kot]

On Sun, 29 Dec 2002, Gernot Hillier wrote:

> On Sunday 29 December 2002 14:29, Pawel Kot wrote:
> > > I'm trying to get gnokii to work on my Sharp Zaurus running OpenZaurus
> > > 3.0. I've read README-6110 and gnokii-ir-howto, but didn't get it to
> > > work.
> >
> > Well, it is quite hard to say what's wrong not having access to the
> > hardware. gnokii-ir-howto is written basing on real experience but with
> > the pc, not Zaurus.
>
> If nothing other helps and you like, I can try to give you a ssh login to the
> Zaurus for some time. But that would need me to reconfigure my firewall and I
> don't wanna do this if it's not absolutely necessary. So please let's try it
> via mail instead firstly...

Oh, I didn't even propose it, just trying to say that it is hard to debug
such things not knowing what happened.

> > > But "gnokii --monitor" always tries to connect for a long time and
> > > doesn't produce any output.
> >
> > Try gnokii --identify. It does a better connection test. If possible,
>
> Same result. Sometimes I get "Telephone interface init failed! Quitting"
> now...

Okay, a silly question: do you enable infrared reception in the phone?

> > enable debug for the tests.
>
> It's necessary to recompile for this, right? I've no idea how to do this
> currently (cross-compiling...) but I can try to do it if you don't have
> another idea...

Well, I think it would help in debugging. Anyway, I'll dig out my 6130 and
will try to connect it to my laptop over infrared connection. Once it's
done I'll send here my config.

> > Maybe that's serial port incorrect setting. Any debug output from all
> > three setups would be usefull to resolve the issue.
>
> Is there a way to get any helpful output for you without recompiling?

No, sorry. I'm starting to think that we should make DEBUG not the
compilation option but a config one. Yeah, now I'm almost convinced to the
idea.

> > > I'm able to unload ircomm-tty and ircomm and sa1100_ir, but this doesn't
> > > help either. I stopped the GUI but this doesn't help, too....
> >
> > You need to unload irda as well.
>
> Naturally, just forgot this in my list. Have unloaded this, too, but doesn't
> help.
>
> BTW: I see
>
> COLLIE serial driver version 1.3
> ttyS0 on SA1100 UART3 (irq 17)
> ttyS1 on SA1100 UART1 (irq 15)touch adj= 17941,25486,-1441792,-3473408
>
> in dmesg output. Does this help you? Are these unnormal irq values a problem?

No, this looks OK.

pkot
-- 
mailto:address@hidden :: mailto:address@hidden
http://kt.linuxnews.pl/ :: Kernel Traffic po polsku