Re[2]: Add supermicro PowerSupply to freeipmi please

[Андрей Грехов]

Hi.
Понедельник,  4 сентября 2023, 22:27 +07:00 от "Al Chu" <chu11@llnl.gov>:
> Hi,
> 
> I believe this is already implemented via
> 
> ipmi-oem supermicro get-pmbus-power-supply-status 1|2|3
> 
> If you can confirm, I can document that it works on X9DRD too.
I confirm.
But it depends more on the type of case.
Works for me on cs-825TQ.
Which are connected by i1c connector "power 5 pin" and protocol PMBus
(or old FRU)

This should work from X8 to X11 "power 5 pin".
I have X7DBE-X, but it works very unstable.

A bunch of x9dr7 and sc-826TQ works only for FRU addresses.
ipmitool -H $host -U $user -P $pass raw 0x06 0x52 0x05 0x$address 0x01 0x$d3
$address = 70|72|74

PWS-720-R
$d3 :
0xA     Temp, C
0xB     Fan1, RPM=$izm*114,5
0xС     Fan2, RPM *114,5
----------
There is no desire to add support for reading modern power supplies over the 
PMBus (rev 1.0,1.1,1.2) ?

> Al
> 
> On 9/4/23 05:23, Андрей Грехов wrote:
> > This working X9drd. PMBus rev.1.1-1.4
> >
> > ipmitool -H $host -U $user -P $pass raw 0x06 0x52 0x07 0x78 0x01 0x88
> InputVoltage
> > 0x78 first PowerSupply
> > 0x7a second PowerSupply
> > raw 0x06 0x52 0x07 0x78 0x01 0x90 Fan1
> > raw 0x06 0x52 0x07 0x78 0x01 0x91 Fan2
> >
> > The's my old articl.
> >
> > Андрей Грехов
> 
> -- 
> Al Chu
> Livermore Computing
> Lawrence Livermore National Laboratory
> 


Андрей Грехов