|
From: | Albert Chu |
Subject: | Re: [Freeipmi-devel] internal IPMI error on successful ipmi_cmd_dcmi_set_asset_tag |
Date: | Mon, 27 Jul 2015 08:19:37 -0700 |
DCMI Set Asset Tag Response --------------------------- FIID Template: tmpl_cmd_dcmi_set_asset_tag_rs { 8, "cmd", REQUIRED, LENGTH-FIXED, MAKES-PACKET-SUFFICIENT } { 8, "comp_code", REQUIRED, LENGTH-FIXED, MAKES-PACKET-SUFFICIENT } { 8, "group_extension_identification", REQUIRED, LENGTH-FIXED } { 8, "total_asset_tag_length_written", REQUIRED, LENGTH-FIXED }
It just so happens that the write actually succeeds as a side effect.
I could write a patch to workaround this by specifically checking for this condition and not outputting the error message??
Could you tell me the Supermicro motherboard you're using so I can document it?
Al
The asset tag is actually changed successfully. But ipmi-config still exits with status 2.Is this a bug in FreeIPMI or the SuperMicro BMC I'm using?../C
$ ipmi-config -vv --driver-type=LAN_2_0 --hostname=192.0.2.42 --username=foo --password=bar --category=dcmi --commit --key-pair=DCMI_Conf:Asset_Tag=ABCD --debug
...
192.0.2.42: =====================================================
192.0.2.42: IPMI 2.0 Group Extension - Set Asset Tag Response
192.0.2.42: =====================================================
192.0.2.42: RMCP Header:
192.0.2.42: ------------
192.0.2.42: [ 6h] = version[ 8b]
192.0.2.42: [ 0h] = reserved[ 8b]
192.0.2.42: [ FFh] = sequence_number[ 8b]
192.0.2.42: [ 7h] = message_class.class[ 5b]
192.0.2.42: [ 0h] = message_class.reserved[ 2b]
192.0.2.42: [ 0h] = message_class.ack[ 1b]
192.0.2.42: IPMI RMCPPLUS Session Header:
192.0.2.42: -----------------------------
192.0.2.42: [ 6h] = authentication_type[ 4b]
192.0.2.42: [ 0h] = reserved1[ 4b]
192.0.2.42: [ 0h] = payload_type[ 6b]
192.0.2.42: [ 1h] = payload_type.authenticated[ 1b]
192.0.2.42: [ 1h] = payload_type.encrypted[ 1b]
192.0.2.42: [ DBCC3969h] = session_id[32b]
192.0.2.42: [ 2h] = session_sequence_number[32b]
192.0.2.42: [ 20h] = ipmi_payload_len[16b]
192.0.2.42: IPMI RMCPPLUS Payload:
192.0.2.42: ----------------------
192.0.2.42: [ BYTE ARRAY ... ] = confidentiality_header[16B]
192.0.2.42: [ 81h FBh 54h DFh E1h BFh 56h 47h ]
192.0.2.42: [ 87h 88h EAh 7Bh A1h 54h 37h 5Bh ]
192.0.2.42: [ BYTE ARRAY ... ] = payload_data[ 9B]
192.0.2.42: [ 81h B4h CBh 20h 7Ch 08h 00h DCh ]
192.0.2.42: [ 80h ]
192.0.2.42: [ 6060504030201h] = confidentiality_trailer[56b]
192.0.2.42: IPMI Message Header:
192.0.2.42: --------------------
192.0.2.42: [ 81h] = rq_addr[ 8b]
192.0.2.42: [ 0h] = rq_lun[ 2b]
192.0.2.42: [ 2Dh] = net_fn[ 6b]
192.0.2.42: [ CBh] = checksum1[ 8b]
192.0.2.42: [ 20h] = rs_addr[ 8b]
192.0.2.42: [ 0h] = rs_lun[ 2b]
192.0.2.42: [ 1Fh] = rq_seq[ 6b]
192.0.2.42: IPMI Command Data:
192.0.2.42: ------------------
192.0.2.42: [ 8h] = cmd[ 8b]
192.0.2.42: [ 0h] = comp_code[ 8b]
192.0.2.42: [ DCh] = group_extension_identification[ 8b]
192.0.2.42: IPMI Trailer:
192.0.2.42: -------------
192.0.2.42: [ 80h] = checksum2[ 8b]
192.0.2.42: IPMI RMCPPLUS Session Trailer:
192.0.2.42: ------------------------------
192.0.2.42: [ FFFFh] = integrity_pad[16b]
192.0.2.42: [ 2h] = pad_length[ 8b]
192.0.2.42: [ 7h] = next_header[ 8b]
192.0.2.42: [ BYTE ARRAY ... ] = authentication_code[12B]
192.0.2.42: [ 46h 09h 9Eh F3h 96h BDh 0Ah 22h ]
192.0.2.42: [ 9Eh E2h 21h 3Dh ]
ipmi_cmd_dcmi_set_asset_tag: internal IPMI error
...
_______________________________________________
Freeipmi-devel mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/freeipmi-devel
[Prev in Thread] | Current Thread | [Next in Thread] |