[Freeipmi-devel] internal IPMI error on successful ipmi_cmd_dcmi_set

The asset tag is actually changed successfully. But ipmi-config still exits with status 2.

Is this a bug in FreeIPMI or the SuperMicro BMC I'm using?

../C

$ ipmi-config -vv --driver-type=LAN_2_0 --hostname=192.0.2.42 --username=foo --password=bar --category=dcmi --commit --key-pair=DCMI_Conf:Asset_Tag=ABCD --debug
 ...
0.2.42: =====================================================
0.2.42: IPMI 2.0 Group Extension - Set Asset Tag Response
0.2.42: =====================================================
0.2.42: RMCP Header:
0.2.42: ------------
0.2.42: [               6h] = version[ 8b]
0.2.42: [               0h] = reserved[ 8b]
0.2.42: [              FFh] = sequence_number[ 8b]
0.2.42: [               7h] = message_class.class[ 5b]
0.2.42: [               0h] = message_class.reserved[ 2b]
0.2.42: [               0h] = message_class.ack[ 1b]
0.2.42: IPMI RMCPPLUS Session Header:
0.2.42: -----------------------------
0.2.42: [               6h] = authentication_type[ 4b]
0.2.42: [               0h] = reserved1[ 4b]
0.2.42: [               0h] = payload_type[ 6b]
0.2.42: [               1h] = payload_type.authenticated[ 1b]
0.2.42: [               1h] = payload_type.encrypted[ 1b]
0.2.42: [        DBCC3969h] = session_id[32b]
0.2.42: [               2h] = session_sequence_number[32b]
0.2.42: [              20h] = ipmi_payload_len[16b]
0.2.42: IPMI RMCPPLUS Payload:
0.2.42: ----------------------
0.2.42: [  BYTE ARRAY ... ] = confidentiality_header[16B]
0.2.42: [ 81h FBh 54h DFh E1h BFh 56h 47h ]
0.2.42: [ 87h 88h EAh 7Bh A1h 54h 37h 5Bh ]
0.2.42: [  BYTE ARRAY ... ] = payload_data[ 9B]
0.2.42: [ 81h B4h CBh 20h 7Ch 08h 00h DCh ]
0.2.42: [ 80h ]
0.2.42: [   6060504030201h] = confidentiality_trailer[56b]
0.2.42: IPMI Message Header:
0.2.42: --------------------
0.2.42: [              81h] = rq_addr[ 8b]
0.2.42: [               0h] = rq_lun[ 2b]
0.2.42: [              2Dh] = net_fn[ 6b]
0.2.42: [              CBh] = checksum1[ 8b]
0.2.42: [              20h] = rs_addr[ 8b]
0.2.42: [               0h] = rs_lun[ 2b]
0.2.42: [              1Fh] = rq_seq[ 6b]
0.2.42: IPMI Command Data:
0.2.42: ------------------
0.2.42: [               8h] = cmd[ 8b]
0.2.42: [               0h] = comp_code[ 8b]
0.2.42: [              DCh] = group_extension_identification[ 8b]
0.2.42: IPMI Trailer:
0.2.42: -------------
0.2.42: [              80h] = checksum2[ 8b]
0.2.42: IPMI RMCPPLUS Session Trailer:
0.2.42: ------------------------------
0.2.42: [            FFFFh] = integrity_pad[16b]
0.2.42: [               2h] = pad_length[ 8b]
0.2.42: [               7h] = next_header[ 8b]
0.2.42: [  BYTE ARRAY ... ] = authentication_code[12B]
0.2.42: [ 46h 09h 9Eh F3h 96h BDh 0Ah 22h ]
0.2.42: [ 9Eh E2h 21h 3Dh ]
ipmi_cmd_dcmi_set_asset_tag: internal IPMI error
 ...

From:	Curtis Doty
Subject:	[Freeipmi-devel] internal IPMI error on successful ipmi_cmd_dcmi_set_asset_tag
Date:	Sun, 26 Jul 2015 14:39:52 -0700

[Freeipmi-devel] internal IPMI error on successful ipmi_cmd_dcmi_set_ass