Re: [Freeipmi-devel] [sr #108197] Supermicro MB support for 1574

[Garry Anderson]

I could not find your file, but I downloaded the
freeipmi-1.2.4.beta0.tar.gz buit it, and get the same results as last
time... Thanks for adding this in.

I will used the --ignore-unrecognized-events flag, which I have always
used, but thought I would bring it up.

Thanks,
Garry

On Wed, Dec 5, 2012 at 3:01 PM, Albert Chu <address@hidden> wrote:
> On Wed, 2012-12-05 at 14:58 -0700, Garry Anderson wrote:
>> Albert,
>> I munged the make files to build the code and it seems better, but not
>> sure about the PS. We have two of them and they are in a nominal
>> state. Here is the output:
>>
>> ./ipmi-sensors --interpret-oem-data -b
>> ID   | Name            | Type              | Reading    | Units | Event
>> 4    | CPU1 Temp       | OEM Reserved      | N/A        | N/A   | 'Low'
>> 71   | CPU2 Temp       | OEM Reserved      | N/A        | N/A   | 'Low'
>> 138  | System Temp     | Temperature       | 18.00      | C     | 'OK'
>> 205  | Peripheral Temp | Temperature       | 26.00      | C     | 'OK'
>> 272  | PCH Temp        | Temperature       | 43.00      | C     | 'OK'
>> 339  | FAN1            | Fan               | 12450.00   | RPM   | 'OK'
>> 406  | FAN2            | Fan               | 13500.00   | RPM   | 'OK'
>> 473  | FAN3            | Fan               | 13350.00   | RPM   | 'OK'
>> 540  | FAN4            | Fan               | 13050.00   | RPM   | 'OK'
>> 607  | FAN5            | Fan               | N/A        | RPM   | N/A
>> 674  | FAN6            | Fan               | N/A        | RPM   | N/A
>> 741  | FANA            | Fan               | N/A        | RPM   | N/A
>> 808  | FANB            | Fan               | N/A        | RPM   | N/A
>> 875  | VTT             | Voltage           | 1.04       | V     | 'OK'
>> 942  | CPU1 Vcore      | Voltage           | 0.93       | V     | 'OK'
>> 1009 | CPU2 Vcore      | Voltage           | 0.90       | V     | 'OK'
>> 1076 | VDIMM AB        | Voltage           | 1.47       | V     | 'OK'
>> 1143 | VDIMM CD        | Voltage           | 1.49       | V     | 'OK'
>> 1210 | VDIMM EF        | Voltage           | 1.49       | V     | 'OK'
>> 1277 | VDIMM GH        | Voltage           | 1.49       | V     | 'OK'
>> 1344 | +1.1 V          | Voltage           | 1.09       | V     | 'OK'
>> 1411 | +1.5 V          | Voltage           | 1.47       | V     | 'OK'
>> 1478 | 3.3V            | Voltage           | 3.26       | V     | 'OK'
>> 1545 | +3.3VSB         | Voltage           | 3.36       | V     | 'OK'
>> 1612 | 5V              | Voltage           | 4.99       | V     | 'OK'
>> 1679 | +5VSB           | Voltage           | 5.06       | V     | 'OK'
>> 1746 | 12V             | Voltage           | 12.19      | V     | 'OK'
>> 1813 | VBAT            | Voltage           | 3.17       | V     | 'OK'
>> 1880 | Chassis Intru   | Physical Security | N/A        | N/A   |
>> 'General Chassis Intrusion'
>> 1947 | PS Status       | Power Supply      | N/A        | N/A   |
>> 'Presence detected' 'Unrecognized Event = 0100h' 'Unrecognized Event =
>> 0200h' 'Unrecognized Event = 0400h' 'Unrecognized Event = 0800h'
>> 'Unrecognized Event = 1000h' 'Unrecognized Event = 2000h'
>> 'Unrecognized Event = 4000h'
>
> This is a bug you can find in a few motherboards.  Effectively the
> motherboard is returning illegal data.  The
> --ignore-unrecognized-events option can help clear that up for you.
>
> Al
>
>>
>> sudo ./ipmi-sensors --interpret-oem-data -b -v -r 1947
>> Record ID: 1947
>> ID String: PS Status
>> Sensor Type: Power Supply (8h)
>> Sensor Number: 85
>> IPMB Slave Address: 10h
>> Sensor Owner ID: 20h
>> Sensor Owner LUN: 0h
>> Channel Number: 0h
>> Entity ID: power supply (10)
>> Entity Instance: 1
>> Entity Instance Type: Physical Entity
>> Event/Reading Type Code: 6Fh
>> Sensor Event: 'Presence detected'
>> Sensor Event: 'Unrecognized Event = 0100h'
>> Sensor Event: 'Unrecognized Event = 0200h'
>> Sensor Event: 'Unrecognized Event = 0400h'
>> Sensor Event: 'Unrecognized Event = 0800h'
>> Sensor Event: 'Unrecognized Event = 1000h'
>> Sensor Event: 'Unrecognized Event = 2000h'
>> Sensor Event: 'Unrecognized Event = 4000h'
>>
>> Thanks for looking into this.
>>
>> --Garry
>>
>> On Wed, Dec 5, 2012 at 11:40 AM, anonymous <address@hidden> wrote:
>> > Follow-up Comment #2, sr #108197 (project freeipmi):
>> >
>> > I pulled the source down, but get the following error:
>> >
>> > ./autogen.sh
>> > + aclocal -I config
>> > + autoheader
>> > + libtoolize --force --automake --copy
>> > + automake --gnu --include-deps --copy --add-missing
>> > doc/Makefile.am:16: `doc_DATA' is used but `docdir' is undefined
>> > Makefile.am:85: `doc_DATA' is used but `docdir' is undefined
>> >
>> > and ./configure does not exist.
>> >
>> > I was running 1.2.3 which I forgot to mention.
>> >
>> > Thanks for your quick response
>> > --Garry
>> >
>> >
>> >     _______________________________________________________
>> >
>> > Reply to this item at:
>> >
>> >   <http://savannah.gnu.org/support/?108197>
>> >
>> > _______________________________________________
>> >   Message sent via/by Savannah
>> >   http://savannah.gnu.org/
>> >
>>
>>
>>
> --
> Albert Chu
> address@hidden
> Computer Scientist
> High Performance Systems Division
> Lawrence Livermore National Laboratory
>
>



-- 
Garry Anderson | Operations Engineer | address@hidden | 303.997.7488x117
Gnip