Re: [Freeipmi-devel] [sr #108197] Supermicro MB support for 1574

[Garry Anderson]

Albert,
I munged the make files to build the code and it seems better, but not
sure about the PS. We have two of them and they are in a nominal
state. Here is the output:

./ipmi-sensors --interpret-oem-data -b
ID   | Name            | Type              | Reading    | Units | Event
4    | CPU1 Temp       | OEM Reserved      | N/A        | N/A   | 'Low'
71   | CPU2 Temp       | OEM Reserved      | N/A        | N/A   | 'Low'
138  | System Temp     | Temperature       | 18.00      | C     | 'OK'
205  | Peripheral Temp | Temperature       | 26.00      | C     | 'OK'
272  | PCH Temp        | Temperature       | 43.00      | C     | 'OK'
339  | FAN1            | Fan               | 12450.00   | RPM   | 'OK'
406  | FAN2            | Fan               | 13500.00   | RPM   | 'OK'
473  | FAN3            | Fan               | 13350.00   | RPM   | 'OK'
540  | FAN4            | Fan               | 13050.00   | RPM   | 'OK'
607  | FAN5            | Fan               | N/A        | RPM   | N/A
674  | FAN6            | Fan               | N/A        | RPM   | N/A
741  | FANA            | Fan               | N/A        | RPM   | N/A
808  | FANB            | Fan               | N/A        | RPM   | N/A
875  | VTT             | Voltage           | 1.04       | V     | 'OK'
942  | CPU1 Vcore      | Voltage           | 0.93       | V     | 'OK'
1009 | CPU2 Vcore      | Voltage           | 0.90       | V     | 'OK'
1076 | VDIMM AB        | Voltage           | 1.47       | V     | 'OK'
1143 | VDIMM CD        | Voltage           | 1.49       | V     | 'OK'
1210 | VDIMM EF        | Voltage           | 1.49       | V     | 'OK'
1277 | VDIMM GH        | Voltage           | 1.49       | V     | 'OK'
1344 | +1.1 V          | Voltage           | 1.09       | V     | 'OK'
1411 | +1.5 V          | Voltage           | 1.47       | V     | 'OK'
1478 | 3.3V            | Voltage           | 3.26       | V     | 'OK'
1545 | +3.3VSB         | Voltage           | 3.36       | V     | 'OK'
1612 | 5V              | Voltage           | 4.99       | V     | 'OK'
1679 | +5VSB           | Voltage           | 5.06       | V     | 'OK'
1746 | 12V             | Voltage           | 12.19      | V     | 'OK'
1813 | VBAT            | Voltage           | 3.17       | V     | 'OK'
1880 | Chassis Intru   | Physical Security | N/A        | N/A   |
'General Chassis Intrusion'
1947 | PS Status       | Power Supply      | N/A        | N/A   |
'Presence detected' 'Unrecognized Event = 0100h' 'Unrecognized Event =
0200h' 'Unrecognized Event = 0400h' 'Unrecognized Event = 0800h'
'Unrecognized Event = 1000h' 'Unrecognized Event = 2000h'
'Unrecognized Event = 4000h'


sudo ./ipmi-sensors --interpret-oem-data -b -v -r 1947
Record ID: 1947
ID String: PS Status
Sensor Type: Power Supply (8h)
Sensor Number: 85
IPMB Slave Address: 10h
Sensor Owner ID: 20h
Sensor Owner LUN: 0h
Channel Number: 0h
Entity ID: power supply (10)
Entity Instance: 1
Entity Instance Type: Physical Entity
Event/Reading Type Code: 6Fh
Sensor Event: 'Presence detected'
Sensor Event: 'Unrecognized Event = 0100h'
Sensor Event: 'Unrecognized Event = 0200h'
Sensor Event: 'Unrecognized Event = 0400h'
Sensor Event: 'Unrecognized Event = 0800h'
Sensor Event: 'Unrecognized Event = 1000h'
Sensor Event: 'Unrecognized Event = 2000h'
Sensor Event: 'Unrecognized Event = 4000h'

Thanks for looking into this.

--Garry

On Wed, Dec 5, 2012 at 11:40 AM, anonymous <address@hidden> wrote:
> Follow-up Comment #2, sr #108197 (project freeipmi):
>
> I pulled the source down, but get the following error:
>
> ./autogen.sh
> + aclocal -I config
> + autoheader
> + libtoolize --force --automake --copy
> + automake --gnu --include-deps --copy --add-missing
> doc/Makefile.am:16: `doc_DATA' is used but `docdir' is undefined
> Makefile.am:85: `doc_DATA' is used but `docdir' is undefined
>
> and ./configure does not exist.
>
> I was running 1.2.3 which I forgot to mention.
>
> Thanks for your quick response
> --Garry
>
>
>     _______________________________________________________
>
> Reply to this item at:
>
>   <http://savannah.gnu.org/support/?108197>
>
> _______________________________________________
>   Message sent via/by Savannah
>   http://savannah.gnu.org/
>



-- 
Garry Anderson | Operations Engineer | address@hidden | 303.997.7488x117
Gnip