Re: [Freeipmi-devel] ipmi_ctx_find_inband: device already open

[Kenneth Stailey]

--- On Tue, 9/14/10, Albert Chu <address@hidden> wrote:

> I'm beginning to wonder if your motherboard simply has an
> interface that
> is supported by the IPMI kernel driver but not by
> FreeIPMI's default
> libraries.  Could you run ipmi-locate real quick to
> see?

Using unpatched ipmi-locate:

address@hidden:~/src/freeipmi-0.8.9$ sudo rmmod ipmi_si ipmi_devintf 
ipmi_msghandler

address@hidden:~/src/freeipmi-0.8.9$ type ipmi-locate
ipmi-locate is /usr/sbin/ipmi-locate

address@hidden:~/src/freeipmi-0.8.9$ ipmi-locate --version
ipmi-locate - 0.8.9
Copyright (C) 2003-2010 FreeIPMI Core Team
This program is free software; you may redistribute it under the terms of
the GNU General Public License.  This program has absolutely no warranty.

address@hidden:~/src/freeipmi-0.8.9$ sudo ipmi-locate
Probing KCS device using DMIDECODE... done
IPMI Version: 1.5
IPMI locate driver: DMIDECODE
IPMI interface: KCS
BMC driver device: 
BMC memory base address: 0xCA2
Register spacing: 1

Probing SMIC device using DMIDECODE... FAILED

Probing BT device using DMIDECODE... FAILED

Probing SSIF device using DMIDECODE... FAILED

Probing KCS device using SMBIOS... done
IPMI Version: 1.5
IPMI locate driver: SMBIOS
IPMI interface: KCS
BMC driver device: 
BMC memory base address: 0xCA3
Register spacing: 1

Probing SMIC device using SMBIOS... FAILED

Probing BT device using SMBIOS... FAILED

Probing SSIF device using SMBIOS... FAILED

Probing KCS device using ACPI... FAILED

Probing SMIC device using ACPI... FAILED

Probing BT device using ACPI... FAILED

Probing SSIF device using ACPI... FAILED

Probing KCS device using PCI... FAILED

Probing SMIC device using PCI... FAILED

Probing BT device using PCI... FAILED

Probing SSIF device using PCI... FAILED

KCS device default values: 
IPMI Version: 1.5
IPMI locate driver: DEFAULT
IPMI interface: KCS
BMC driver device: 
BMC I/O base address: 0xCA2
Register spacing: 1

SMIC device default values: 
IPMI Version: 1.5
IPMI locate driver: DEFAULT
IPMI interface: SMIC
BMC driver device: 
BMC I/O base address: 0xCA9
Register spacing: 1

BT device default values: 
SSIF device default values: 
IPMI Version: 1.5
IPMI locate driver: DEFAULT
IPMI interface: SSIF
BMC driver device: /dev/i2c-0
BMC SMBUS slave address: 0x42
Register spacing: 1