[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Dvdrtools-users] Help with Sony DRX-500ULX drive
From: |
Scott Savarese |
Subject: |
Re: [Dvdrtools-users] Help with Sony DRX-500ULX drive |
Date: |
Mon, 30 Jun 2003 20:47:21 -0400 (EDT) |
I've been playing with prodvd and it isn't completely reliable. I am
having problems blanking a disk. Also as said here... The drive supports
tao but for some reason I can't write in TAO.
cdrecord-wrapper just called cdrecord-prodvd.
Here is the output of some blank commands.
Thanks,
Scott
address@hidden:/home/savarese# ./cdrecord-wrapper.sh -dev 2,0,0 -blank=fast
Cdrecord-ProDVD-Clone 2.01a12 (i586-pc-linux-gnu) Copyright (C) 1995-2003
Jörg Schilling
Unlocked features: ProDVD Clone
Limited features: speed
This copy of cdrecord is licensed for:
private/research/educational_non-commercial_use
scsidev: '2,0,0'
scsibus: 2 target: 0 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.7'
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities :
Vendor_info : 'SONY '
Identifikation : 'DVD RW DRU-500A '
Revision : '2.0f'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc-3 DVD+RW driver (mmc_dvdplusrw).
Driver flags : DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Starting to write CD/DVD at speed 2 in real BLANK mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
./cdrecord-ProDVD: Canot blank with non Ricoh based drive.
./cdrecord-ProDVD: Cannot blank disk, aborting.
./cdrecord-ProDVD: Some drives do not support all blank types.
./cdrecord-ProDVD: Try again with cdrecord blank=all.
address@hidden:/home/savarese#
address@hidden:/home/savarese# ./cdrecord-wrapper.sh -dev 2,0,0 -blank=all
Cdrecord-ProDVD-Clone 2.01a12 (i586-pc-linux-gnu) Copyright (C) 1995-2003
Jörg Schilling
Unlocked features: ProDVD Clone
Limited features: speed
This copy of cdrecord is licensed for:
private/research/educational_non-commercial_use
scsidev: '2,0,0'
scsibus: 2 target: 0 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.7'
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities :
Vendor_info : 'SONY '
Identifikation : 'DVD RW DRU-500A '
Revision : '2.0f'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc-3 DVD+RW driver (mmc_dvdplusrw).
Driver flags : DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Starting to write CD/DVD at speed 2 in real BLANK mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
./cdrecord-ProDVD: Canot blank with non Ricoh based drive.
./cdrecord-ProDVD: Cannot blank disk, aborting.
Volker Kuhlmann said:
>> did you also try the Sony DRX-500ULX USB2 drive with the OSS DVD
>> extensions for cdrtools-2.0 ? :
>
> Patience patience - I'm getting to that ;)
> I no longer have access to the drive, but was able to borrow it for a
> few hours yesterday.
>
> Firmware upgraded to 2.0 on the drive.
> 0,0,0 0) 'SONY ' 'DVD RW DRU-500A ' '2.0f' Removable CD-ROM
> Connected via ieee1394, the box only has USB1 which works fine with this
> drive for everything but writing DVDs. Kernel 2.4.20, SuSE 8.2. I wanted
> to know what my options would be for writing DVDs. Due to bad timing the
> supply of DVD+RW had run out this week, so I could only test DVD-RW.
>
> growisofs: complains about "mounted media is not DVD+R(W)". Sorry no
> testing this with +RW this time.
>
> I assume cdrecord-ossdvd is identical to dvdrecord, except that it is
> based on cdrecord 2. Is this correct Robert? In that case, dvdrecord
> should be committed to the attic, and I didn't test it.
>
> With cdrecord-ossdvd, -load, -eject, blank=fast are working fine. -toc
> works if the disk has something on it, it gives a scsi error otherwise:
>
> cdrecord-ossdvd: Input/output error. read toc: scsi sendcmd: no error
> CDB: 43 00 00 00 00 00 00 00 04 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 19 44 4A 93 0A 00 00 00 00 24 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
> Sense flags: Blk 423905939 (not valid)
> cmd finished after 0.004s timeout 40s
> cdrecord-ossdvd: Cannot read TOC header
> cdrecord-ossdvd: Cannot read TOC/PMA
>
> In some (all?) cases cdrecord-prodvd gives a scsi error too for -toc on
> a blank disk.
>
> There are other downsides to cdrecord-ossdvd. -atip doesn't ever seem to
> show anything useful. Writing in TAO (i.e. default) mode failed:
>
> Supported modes: PACKET SAO
> Drive buf size : 4718592 = 4608 KB
> FIFO size : 4194304 = 4096 KB
> cdrecord-ossdvd: Drive does not support TAO recording.
> cdrecord-ossdvd: Illegal write mode for this drive.
>
> This appears to be nonsense, as cdrecord-prodvd says:
>
> Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
> Drive buf size : 4718592 = 4608 KB
> FIFO size : 4194304 = 4096 KB
> Track 01: data 3906 MB padsize: 30 KB
> Total size: 3906 MB = 2000015 sectors
> Current Secsize: 2048
> Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 298481
> Starting to write CD/DVD at speed 1 in real TAO mode for single
> session.
>
> Writing to a blanked DVD-RW fails with:
>
> cdrecord-ossdvd dev=0,0,0 speed=1 -data -dao -v /data/tmp/diskimg
> ========================================================================
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> Linux sg driver version: 3.1.24
> cdrecord-ossdvd: Warning: using inofficial libscg transport code
> version (address@hidden
> '@(#)scsi-linux-sg.c 1.75 02/10/21 Copyright 1997 J. Schilling').
> Cdrecord 2.0 (i686-suse-linux) Copyright (C) 1995-2002 Jörg Schilling
> TOC Type: 1 = CD-ROM
> Using libscg version 'schily-0.7'
> atapi: 1
> Device type : Removable CD-ROM
> Version : 2
> Response Format: 2
> Capabilities :
> Vendor_info : 'SONY '
> Identifikation : 'DVD RW DRU-500A '
> Revision : '2.0f'
> Device seems to be: Generic mmc2 DVD-R/DVD-RW.
> Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
> Driver flags : SWABAUDIO BURNFREE
> Supported modes: PACKET SAO
> Drive buf size : 4718592 = 4608 KB
> FIFO size : 4194304 = 4096 KB
> Track 01: data 3906 MB
> Total size: 4486 MB (444:26.66) = 2000000 sectors
> Lout start: 4486 MB (444:28/50) = 2000000 sectors
> Current Secsize: 2048
> ATIP start of lead in: -150 (00:00/00)
> Disk type: unknown dye (reserved id code)
> Manuf. index: -1
> Manufacturer: unknown (not in table)
> Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 298496
> Starting to write CD/DVD at speed 1 in real SAO mode for single
> session. Last chance to quit, starting real write in 9
> seconds. 8 seconds. 7
> seconds. 6 seconds. 5
> seconds. 4 seconds. 3
> seconds. 2 seconds. 1
> seconds. 0 seconds. Operation starts. Waiting for
> reader process to fill input buffer ... input buffer ready. BURN-Free
> is ON.
> Performing OPC...
> Sending CUE sheet...
> Starting new track at sector: 2000166
> Track 01: 0 of 3906 MB written.cdrecord-ossdvd: Input/output
> error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 1E 85 26 00 00
> 1F 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 19 44 4A 93 0A 00 00 00 00 2C 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
> Sense flags: Blk 423905939 (not valid)
> cmd finished after 0.003s timeout 200s
> Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> write track data: error after 0 bytes
>
> I used the binary I compiled myself, starting with the SuSE cdrecord
> (patched) source and adding Robert's dvd patch.
>
> Unfortunately, I have to conclude the cdrecord-prodvd seems to be the
> only program which can currently be relied upon, although the problem in
> -ossdvd seems fixable. There doesn't seem to be much going on with Linux
> and dvd development atm though.
>
> Volker
>
> --
> Volker Kuhlmann is possibly list0570 with the domain in
> header
> http://volker.dnsalias.net/ Please do not CC list postings to me.
>
>
> _______________________________________________
> Dvdrtools-users mailing list
> address@hidden
> http://mail.nongnu.org/mailman/listinfo/dvdrtools-users
Re: [Dvdrtools-users] Help with Sony DRX-500ULX drive, Robert M. Stockmann, 2003/06/22
Re: [Dvdrtools-users] Help with Sony DRX-500ULX drive, Robert M. Stockmann, 2003/06/24